veilletechno:atomic [Linuxed]

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
====== Atomic CentOS 7 ======

===== Configuration du master =====

==== Création du registry docker local ====

Création d'un containeur docker registry :

<code>
sudo docker create -p 5000:5000
-v /var/lib/local-registry:/var/lib/registry
-e REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY=/var/lib/registry
-e REGISTRY_PROXY_REMOTEURL=https://registry-1.docker.io
--name=local-registry registry:2
</code>

Gérer les contextes SELinux sur le stockage des images du registry :

<code>
sudo mkdir -p /var/lib/local-registry
sudo chcon -Rvt svirt_sandbox_file_t /var/lib/local-registry
</code>

Création d'un service pour démarrer automatiquement le registry. Contenu du fichier /etc/systemd/system/local-registry.service :

<file>
[Unit]
Description=Local Docker Mirror registry cache
Requires=docker.service
After=docker.service

[Service]
Restart=on-failure
RestartSec=10
ExecStart=/usr/bin/docker start -a %p
ExecStop=-/usr/bin/docker stop -t 2 %p

[Install]
WantedBy=multi-user.target
</file>

Pour l'activer :

<code>
sudo systemctl daemon-reload
sudo systemctl enable local-registry
sudo systemctl start local-registry
</code>

==== Configuration ETCD ====

Fichier /etc/etcd/etcd.conf :

<file>
# [member]
ETCD_NAME=default
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_WAL_DIR=""
#ETCD_SNAPSHOT_COUNT="10000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
#ETCD_LISTEN_PEER_URLS="http://localhost:2380"
ETCD_LISTEN_CLIENT_URLS="http://0.0.0.0:2379,http://0.0.0.0:4001"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
#ETCD_CORS=""
#
#[cluster]
#ETCD_INITIAL_ADVERTISE_PEER_URLS="http://localhost:2380"
# if you use different ETCD_NAME (e.g. test), set ETCD_INITIAL_CLUSTER value for this name, i.e. "test=http://..."
#ETCD_INITIAL_CLUSTER="default=http://localhost:2380"
#ETCD_INITIAL_CLUSTER_STATE="new"
#ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="http://0.0.0.0:2379,http://0.0.0.0:4001"
#ETCD_DISCOVERY=""
#ETCD_DISCOVERY_SRV=""
#ETCD_DISCOVERY_FALLBACK="proxy"
#ETCD_DISCOVERY_PROXY=""
#ETCD_STRICT_RECONFIG_CHECK="false"
#ETCD_AUTO_COMPACTION_RETENTION="0"
#
#[proxy]
#ETCD_PROXY="off"
#ETCD_PROXY_FAILURE_WAIT="5000"
#ETCD_PROXY_REFRESH_INTERVAL="30000"
#ETCD_PROXY_DIAL_TIMEOUT="1000"
#ETCD_PROXY_WRITE_TIMEOUT="5000"
#ETCD_PROXY_READ_TIMEOUT="0"
#
#[security]
#ETCD_CERT_FILE=""
#ETCD_KEY_FILE=""
#ETCD_CLIENT_CERT_AUTH="false"
#ETCD_TRUSTED_CA_FILE=""
#ETCD_AUTO_TLS="false"
#ETCD_PEER_CERT_FILE=""
#ETCD_PEER_KEY_FILE=""
#ETCD_PEER_CLIENT_CERT_AUTH="false"
#ETCD_PEER_TRUSTED_CA_FILE=""
#ETCD_PEER_AUTO_TLS="false"
#
#[logging]
#ETCD_DEBUG="false"
# examples for -log-package-levels etcdserver=WARNING,security=DEBUG
#ETCD_LOG_PACKAGE_LEVELS=""
#
#[profiling]
#ETCD_ENABLE_PPROF="false"
#ETCD_METRICS="basic"
</file>

==== Services kubernetes master ====

Pour générer les certificats :

<code>
curl -L -O https://storage.googleapis.com/kubernetes-release/easy-rsa/easy-rsa.tar.gz
tar xzf easy-rsa.tar.gz
cd easy-rsa-master/easyrsa3
./easyrsa init-pki
MASTER_IP=192.168.2.112
./easyrsa --batch "--req-cn=${MASTER_IP}@`date +%s`" build-ca nopass
./easyrsa --subject-alt-name="IP:${MASTER_IP}" build-server-full server nopass
sudo mkdir /etc/kubernetes/certs
for i in {pki/ca.crt,pki/issued/server.crt,pki/private/server.key}; do sudo cp $i /etc/kubernetes/certs; done
sudo chown -R kube:kube /etc/kubernetes/certs
</code>

Les services passent par l'utilisation de containeurs. Ils seront gérés par 3 services systemd.

Fichier /etc/systemd/system/kube-apiserver.service :

<file>
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service

[Service]
TimeoutStartSec=0
Restart=always
ExecStartPre=-/usr/bin/docker stop %n
ExecStartPre=-/usr/bin/docker rm %n
ExecStartPre=/usr/bin/docker pull registry.centos.org/centos/kubernetes-apiserver
ExecStart=/usr/bin/docker run --rm --net=host -p 443:443 -v /etc/kubernetes:/etc/kubernetes:z --name %n registry.centos.org/centos/kubernetes-apiserver

[Install]
WantedBy=multi-user.target
</file>

Fichier /etc/systemd/system/kube-controller-manager.service :

<file>
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service

[Service]
TimeoutStartSec=0
Restart=always
ExecStartPre=-/usr/bin/docker stop %n
ExecStartPre=-/usr/bin/docker rm %n
ExecStartPre=/usr/bin/docker pull registry.centos.org/centos/kubernetes-controller-manager
ExecStart=/usr/bin/docker run --rm --net=host -v /etc/kubernetes:/etc/kubernetes:z --name %n registry.centos.org/centos/kubernetes-controller-manager

[Install]
WantedBy=multi-user.target
</file>

Fichier /etc/systemd/system/kube-scheduler.service :

<file>
[Unit]
Description=Kubernetes Scheduler Plugin
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service

[Service]
TimeoutStartSec=0
Restart=always
ExecStartPre=-/usr/bin/docker stop %n
ExecStartPre=-/usr/bin/docker rm %n
ExecStartPre=/usr/bin/docker pull registry.centos.org/centos/kubernetes-scheduler
ExecStart=/usr/bin/docker run --rm --net=host -v /etc/kubernetes:/etc/kubernetes:z --name %n registry.centos.org/centos/kubernetes-scheduler

[Install]
WantedBy=multi-user.target
</file>

Configuration du serveur API, fichier /etc/kubernetes/apiserver :

<file>
KUBE_API_ADDRESS="--insecure-bind-address=0.0.0.0"

KUBE_API_ARGS="--tls-cert-file=/etc/kubernetes/certs/server.crt --tls-private-key-file=/etc/kubernetes/certs/server.key --client-ca-file=/etc/kubernetes/certs/ca.crt --service-account-key-file=/etc/kubernetes/certs/server.crt --etcd-servers=http://192.168.2.112:2379 --service-cluster-ip-range=172.20.0.0/24"
</file>

Partie controller-manager, fichier /etc/kubernetes/controller-manager :

<file>
KUBE_CONTROLLER_MANAGER_ARGS="--service-account-private-key-file=/etc/kubernetes/certs/server.key --root-ca-file=/etc/kubernetes/certs/ca.crt"
</file>

Activation des services :

<code>
sudo systemctl enable etcd kube-apiserver kube-controller-manager kube-scheduler
sudo systemctl start etcd kube-apiserver kube-controller-manager kube-scheduler
</code>


===== Configuration d'un noeud =====

==== Configuration docker registry ====

Ajout du docker registry normalement hébergé sur le master. Dans /etc/sysconfig/docker dans OPTIONS ajouter :

<code>
–registry-mirror=http://192.168.2.112:5000
</code>

==== Configuration du réseau Flannel ====

Il faut principalement indiquer le cluster ETCD et le chemin pour accéder à la configuration du réseau. Fichier /etc/sysconfig/flanneld :

<file>
# etcd url location. Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="http://192.168.2.112:2379"

# etcd config key. This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/atomic.io/network"
</file>

==== Configuration de Kubernetes ====

Il s'agit de configurer la partie cliente : kubelet. Principalement d'indiquer le hostname (hostname -f doit correspondre) et l'adresse du client, ainsi que celle du master.

<file>
###
# kubernetes kubelet (minion) config

# The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=192.168.2.108"

# The port for the info server to serve on
# KUBELET_PORT="--port=10250"

# You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=atomic7-1.localdomain"

# location of the api-server
KUBELET_API_SERVER="--api-servers=http://192.168.2.112:8080"

# pod infrastructure container
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest"

# Add your own!
KUBELET_ARGS=""
</file>

Il faut aussi préciser comment joindre le cluster ETCD, via le fichier /etc/kubernetes/config :

<file>
###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
#   kube-apiserver.service
#   kube-controller-manager.service
#   kube-scheduler.service
#   kubelet.service
#   kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"

# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"

# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"

# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://192.168.2.112:8080"
</file>

Il ne reste plus qu'à activer les services, et à redemarrer pour être sûr de rien avoir oublié :

<code>
sudo systemctl enable flanneld kubelet kube-proxy
sudo systemctl reboot
</code>