Différences
Ci-dessous, les différences entre deux révisions de la page.
Les deux révisions précédentes Révision précédente Prochaine révision | Révision précédente | ||
labo:t110ii [2016/11/30 17:54] – [Disque 1 sdb] madko | labo:t110ii [2020/05/24 16:35] (Version actuelle) – madko | ||
---|---|---|---|
Ligne 3: | Ligne 3: | ||
Serveur Dell T110 II achété d' | Serveur Dell T110 II achété d' | ||
- | * Xeon E3 1220 | + | * Intel Xeon E3 1220 |
- | * 16Go (voire 32) | + | * 32Go (4x8Go Samsung 1x 8GB DDR3-1600 ECC UDIMM PC3L-12800E Dual Rank x8 Module) |
- | * 4x 300Go SAS 6gbps 15K | + | * 4x Seagate ST3300657SS |
+ | |||
+ | ===== Ports ===== | ||
+ | |||
+ | Face avant: | ||
+ | |||
+ | * 2 baies 5" | ||
+ | * 2 ports USB | ||
+ | |||
+ | Face arrière: | ||
+ | |||
+ | * 4 ports USB | ||
+ | * 1 port eSata | ||
+ | * 1 port VGA | ||
+ | * 1 port série | ||
+ | * 1 port RJ45 (partagé avec IPMI) | ||
===== Cpu ===== | ===== Cpu ===== | ||
Ligne 115: | Ligne 130: | ||
address sizes : 36 bits physical, 48 bits virtual | address sizes : 36 bits physical, 48 bits virtual | ||
power management: | power management: | ||
+ | |||
</ | </ | ||
- | |||
===== Cartes PCI ===== | ===== Cartes PCI ===== | ||
Ligne 122: | Ligne 137: | ||
Retour commande lscpi : | Retour commande lscpi : | ||
- | 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 Processor Family DRAM Controller (rev 09)\\ | + | < |
- | 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)\\ | + | 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 Processor Family DRAM Controller (rev 09) |
- | 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)\\ | + | 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) |
- | 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)\\ | + | 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) |
- | 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)\\ | + | 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) |
- | 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)\\ | + | 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) |
- | 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)\\ | + | 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) |
- | 00:1f.0 ISA bridge: Intel Corporation C202 Chipset Family LPC Controller (rev 04)\\ | + | 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4) |
- | 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04)\\ | + | 00:1f.0 ISA bridge: Intel Corporation C202 Chipset Family LPC Controller (rev 04) |
- | 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)\\ | + | 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04) |
- | 01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)\\ | + | 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) |
- | 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express\\ | + | 01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) |
+ | 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express | ||
04:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a) | 04:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a) | ||
+ | </ | ||
===== Informations DMI ===== | ===== Informations DMI ===== | ||
Ligne 142: | Ligne 159: | ||
< | < | ||
- | # dmidecode 2.12-dmifs | + | # dmidecode |
+ | Getting SMBIOS data from sysfs. | ||
SMBIOS 2.7 present. | SMBIOS 2.7 present. | ||
- | 59 structures occupying | + | 59 structures occupying |
- | Table at 0x000E65E0. | + | Table at 0xBF6AD000. |
Handle 0x0033, DMI type 218, 23 bytes | Handle 0x0033, DMI type 218, 23 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | DA 17 33 00 B2 00 91 03 0E 30 80 25 03 AD 02 01 | |
- | DA 17 33 00 B2 00 91 03 0E 30 80 25 03 AD 02 01\\ | + | 00 68 03 AD 02 00 00 |
- | | + | |
Handle 0x0000, DMI type 208, 16 bytes | Handle 0x0000, DMI type 208, 16 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | D0 10 00 00 02 00 FE 00 DE 04 00 00 00 01 00 00 | |
- | D0 10 00 00 02 00 FE 00 DE 04 00 00 00 01 00 00 | + | |
Handle 0x0001, DMI type 210, 12 bytes | Handle 0x0001, DMI type 210, 12 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | D2 0C 01 00 F8 03 04 03 06 80 04 05 | |
- | D2 0C 01 00 F8 03 04 03 06 80 04 05 | + | |
Handle 0x0002, DMI type 216, 9 bytes | Handle 0x0002, DMI type 216, 9 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | D8 09 02 00 01 02 01 00 00 | |
- | D8 09 02 00 01 02 01 00 00\\ | + | Strings: |
- | + | MATROX | |
- | Strings: | + | VGA/VBE BIOS, Version V3.8WO |
- | + | ||
- | MATROX\\ | + | |
- | | + | |
Handle 0x0003, DMI type 222, 16 bytes | Handle 0x0003, DMI type 222, 16 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | DE 10 03 00 01 10 00 00 16 11 25 07 53 01 00 01 | |
- | DE 10 03 00 01 10 00 00 16 11 25 07 53 01 00 01 | + | |
Handle 0x0004, DMI type 225, 25 bytes | Handle 0x0004, DMI type 225, 25 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | E1 19 04 00 01 01 05 00 00 02 2C 00 00 03 2D 00 | |
- | E1 19 04 00 01 01 05 00 00 02 2C 00 00 03 2D 00\\ | + | 00 04 2E 00 00 05 2F 00 00 |
- | | + | Strings: |
- | + | CPU.Socket.1 | |
- | Strings: | + | DIMM.Socket.A1 |
- | + | DIMM.Socket.A2 | |
- | CPU.Socket.1\\ | + | DIMM.Socket.A3 |
- | | + | DIMM.Socket.A4 |
- | | + | |
- | | + | |
- | | + | |
Handle 0x0005, DMI type 4, 42 bytes | Handle 0x0005, DMI type 4, 42 bytes | ||
Processor Information | Processor Information | ||
- | Socket Designation: | + | |
- | Type: Central Processor | + | Type: Central Processor |
- | Family: Xeon | + | Family: Xeon |
- | Manufacturer: | + | Manufacturer: |
- | ID: A7 06 02 00 FF FB EB BF | + | ID: A7 06 02 00 FF FB EB BF |
- | Signature: Type 0, Family 6, Model 42, Stepping 7 | + | Signature: Type 0, Family 6, Model 42, Stepping 7 |
- | Flags: | + | Flags: |
- | + | FPU (Floating-point unit on-chip) | |
- | FPU (Floating-point unit on-chip)\\ | + | VME (Virtual mode extension) |
- | | + | DE (Debugging extension) |
- | | + | PSE (Page size extension) |
- | | + | TSC (Time stamp counter) |
- | | + | MSR (Model specific registers) |
- | | + | PAE (Physical address extension) |
- | | + | MCE (Machine check exception) |
- | | + | CX8 (CMPXCHG8 instruction supported) |
- | | + | APIC (On-chip APIC hardware supported) |
- | | + | SEP (Fast system call) |
- | | + | MTRR (Memory type range registers) |
- | | + | PGE (Page global enable) |
- | | + | MCA (Machine check architecture) |
- | | + | CMOV (Conditional move instruction supported) |
- | | + | PAT (Page attribute table) |
- | | + | PSE-36 (36-bit page size extension) |
- | | + | CLFSH (CLFLUSH instruction supported) |
- | | + | DS (Debug store) |
- | | + | ACPI (ACPI supported) |
- | | + | MMX (MMX technology supported) |
- | | + | FXSR (FXSAVE and FXSTOR instructions supported) |
- | | + | SSE (Streaming SIMD extensions) |
- | | + | SSE2 (Streaming SIMD extensions 2) |
- | | + | SS (Self-snoop) |
- | | + | HTT (Multi-threading) |
- | | + | TM (Thermal monitor supported) |
- | | + | PBE (Pending break enabled) |
- | | + | Version: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz |
- | + | Voltage: 1.2 V | |
- | Version: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz | + | External Clock: 100 MHz |
- | Voltage: 1.2 V | + | Max Speed: 4000 MHz |
- | External Clock: 100 MHz | + | Current Speed: 3100 MHz |
- | Max Speed: 4000 MHz | + | Status: Populated, Enabled |
- | Current Speed: 3100 MHz | + | Upgrade: Socket BGA1155 |
- | Status: Populated, Enabled | + | L1 Cache Handle: 0x0007 |
- | Upgrade: Socket BGA1155 | + | L2 Cache Handle: 0x0008 |
- | L1 Cache Handle: 0x0007 | + | L3 Cache Handle: 0x0009 |
- | L2 Cache Handle: 0x0008 | + | Serial Number: NotSupport |
- | L3 Cache Handle: 0x0009 | + | Asset Tag: FFFF |
- | Serial Number: NotSupport | + | Part Number: FFFF |
- | Asset Tag: FFFF | + | Core Count: 4 |
- | Part Number: FFFF | + | Core Enabled: 4 |
- | Core Count: 4 | + | Thread Count: 4 |
- | Core Enabled: 4 | + | Characteristics: |
- | Thread Count: 4 | + | 64-bit capable |
- | Characteristics: | + | Multi-Core |
- | + | Execute Protection | |
- | 64-bit capable\\ | + | Enhanced Virtualization |
- | | + | Power/ |
- | | + | |
- | | + | |
- | | + | |
Handle 0x0006, DMI type 7, 19 bytes | Handle 0x0006, DMI type 7, 19 bytes | ||
Cache Information | Cache Information | ||
- | Socket Designation: | + | |
- | Configuration: | + | Configuration: |
- | Operational Mode: Write Through | + | Operational Mode: Write Through |
- | Location: Internal | + | Location: Internal |
- | Installed Size: 32 kB | + | Installed Size: 32 kB |
- | Maximum Size: 32 kB | + | Maximum Size: 32 kB |
- | Supported SRAM Types: | + | Supported SRAM Types: |
- | + | Unknown | |
- | Unknown\\ | + | Installed SRAM Type: Unknown |
- | + | Speed: Unknown | |
- | Installed SRAM Type: Unknown | + | Error Correction Type: Parity |
- | Speed: Unknown | + | System Type: Data |
- | Error Correction Type: Parity | + | Associativity: |
- | System Type: Data | + | |
- | Associativity: | + | |
Handle 0x0007, DMI type 7, 19 bytes | Handle 0x0007, DMI type 7, 19 bytes | ||
Cache Information | Cache Information | ||
- | Socket Designation: | + | |
- | Configuration: | + | Configuration: |
- | Operational Mode: Write Through | + | Operational Mode: Write Through |
- | Location: Internal | + | Location: Internal |
- | Installed Size: 32 kB | + | Installed Size: 32 kB |
- | Maximum Size: 32 kB | + | Maximum Size: 32 kB |
- | Supported SRAM Types: | + | Supported SRAM Types: |
- | + | Unknown | |
- | Unknown\\ | + | Installed SRAM Type: Unknown |
- | + | Speed: Unknown | |
- | Installed SRAM Type: Unknown | + | Error Correction Type: Parity |
- | Speed: Unknown | + | System Type: Instruction |
- | Error Correction Type: Parity | + | Associativity: |
- | System Type: Instruction | + | |
- | Associativity: | + | |
Handle 0x0008, DMI type 7, 19 bytes | Handle 0x0008, DMI type 7, 19 bytes | ||
Cache Information | Cache Information | ||
- | Socket Designation: | + | |
- | Configuration: | + | Configuration: |
- | Operational Mode: Write Through | + | Operational Mode: Write Through |
- | Location: Internal | + | Location: Internal |
- | Installed Size: 1024 kB | + | Installed Size: 1 MB |
- | Maximum Size: 1024 kB | + | Maximum Size: 1 MB |
- | Supported SRAM Types: | + | Supported SRAM Types: |
- | + | Unknown | |
- | Unknown\\ | + | Installed SRAM Type: Unknown |
- | + | Speed: Unknown | |
- | Installed SRAM Type: Unknown | + | Error Correction Type: Multi-bit ECC |
- | Speed: Unknown | + | System Type: Unified |
- | Error Correction Type: Multi-bit ECC | + | Associativity: |
- | System Type: Unified | + | |
- | Associativity: | + | |
Handle 0x0009, DMI type 7, 19 bytes | Handle 0x0009, DMI type 7, 19 bytes | ||
Cache Information | Cache Information | ||
- | Socket Designation: | + | |
- | Configuration: | + | Configuration: |
- | Operational Mode: Write Back | + | Operational Mode: Write Back |
- | Location: Internal | + | Location: Internal |
- | Installed Size: 8192 kB | + | Installed Size: 8 MB |
- | Maximum Size: 8192 kB | + | Maximum Size: 8 MB |
- | Supported SRAM Types: | + | Supported SRAM Types: |
- | + | Unknown | |
- | Unknown\\ | + | Installed SRAM Type: Unknown |
- | + | Speed: Unknown | |
- | Installed SRAM Type: Unknown | + | Error Correction Type: Multi-bit ECC |
- | Speed: Unknown | + | System Type: Unified |
- | Error Correction Type: Multi-bit ECC | + | Associativity: |
- | System Type: Unified | + | |
- | Associativity: | + | |
Handle 0x000A, DMI type 0, 24 bytes | Handle 0x000A, DMI type 0, 24 bytes | ||
BIOS Information | BIOS Information | ||
- | Vendor: Dell Inc. | + | |
- | Version: 2.8.0 | + | Version: 2.8.0 |
- | Release Date: 06/ | + | Release Date: 06/ |
- | Address: 0xF0000 | + | Address: 0xF0000 |
- | Runtime Size: 64 kB | + | Runtime Size: 64 kB |
- | ROM Size: 4096 kB | + | ROM Size: 4096 kB |
- | Characteristics: | + | Characteristics: |
- | + | ISA is supported | |
- | ISA is supported\\ | + | PCI is supported |
- | | + | PNP is supported |
- | | + | BIOS is upgradeable |
- | | + | BIOS shadowing is allowed |
- | | + | Boot from CD is supported |
- | | + | Selectable boot is supported |
- | | + | EDD is supported |
- | | + | Japanese floppy for Toshiba 1.2 MB is supported (int 13h) |
- | | + | 5.25"/ |
- | | + | 5.25"/ |
- | | + | 3.5"/ |
- | | + | 8042 keyboard services are supported (int 9h) |
- | | + | Serial services are supported (int 14h) |
- | | + | CGA/mono video services are supported (int 10h) |
- | | + | ACPI is supported |
- | | + | USB legacy is supported |
- | | + | BIOS boot specification is supported |
- | | + | Function key-initiated network boot is supported |
- | | + | Targeted content distribution is supported |
- | | + | UEFI is supported |
- | | + | BIOS Revision: 2.8 |
- | + | ||
- | BIOS Revision: 2.8 | + | |
Handle 0x000B, DMI type 1, 27 bytes | Handle 0x000B, DMI type 1, 27 bytes | ||
System Information | System Information | ||
- | Manufacturer: | + | |
- | Product Name: PowerEdge T110 II | + | Product Name: PowerEdge T110 II |
- | Version: Not Specified | + | Version: Not Specified |
- | Serial Number: 123456789 | + | Serial Number: 123456789 |
- | UUID: 12345678-1234-5678-90AB-CDDEEFAABBCC | + | UUID: 12345678-1234-5678-90ab-cddeefaabbcc |
- | Wake-up Type: Power Switch | + | Wake-up Type: Power Switch |
- | SKU Number: Not Specified | + | SKU Number: Not Specified |
- | Family: Not Specified | + | Family: Not Specified |
Handle 0x000C, DMI type 2, 9 bytes | Handle 0x000C, DMI type 2, 9 bytes | ||
Base Board Information | Base Board Information | ||
- | Manufacturer: | + | |
- | Product Name: 015TH9 | + | Product Name: 015TH9 |
- | Version: A08 | + | Version: A08 |
- | Serial Number: ..CN7082122H0KM8. | + | Serial Number: ..CN7082122H0KM8. |
- | Asset Tag: Not Specified | + | Asset Tag: Not Specified |
Handle 0x000D, DMI type 3, 21 bytes | Handle 0x000D, DMI type 3, 21 bytes | ||
Chassis Information | Chassis Information | ||
- | Manufacturer: | + | |
- | Type: Main Server Chassis | + | Type: Main Server Chassis |
- | Lock: Present | + | Lock: Present |
- | Version: Not Specified | + | Version: Not Specified |
- | Serial Number: Chassis Serial Number | + | Serial Number: Chassis Serial Number |
- | Asset Tag: Chassis Asset Tag | + | Asset Tag: Chassis Asset Tag |
- | Boot-up State: Safe | + | Boot-up State: Safe |
- | Power Supply State: Safe | + | Power Supply State: Safe |
- | Thermal State: Safe | + | Thermal State: Safe |
- | Security Status: Unknown | + | Security Status: Unknown |
- | OEM Information: | + | OEM Information: |
- | Height: 5 U | + | Height: 5 U |
- | Number Of Power Cords: Unspecified | + | Number Of Power Cords: Unspecified |
- | Contained Elements: 0 | + | Contained Elements: 0 |
Handle 0x000E, DMI type 8, 9 bytes | Handle 0x000E, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: VGA | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: CRT | + | External Reference Designator: CRT |
- | External Connector Type: DB-15 female | + | External Connector Type: DB-15 female |
- | Port Type: Video Port | + | Port Type: Video Port |
Handle 0x000F, DMI type 8, 9 bytes | Handle 0x000F, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: COM | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: COM 1 | + | External Reference Designator: COM 1 |
- | External Connector Type: DB-9 male | + | External Connector Type: DB-9 male |
- | Port Type: Serial Port 16550A Compatible | + | Port Type: Serial Port 16550A Compatible |
Handle 0x0010, DMI type 8, 9 bytes | Handle 0x0010, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: LAN | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Network 1 | + | External Reference Designator: Network 1 |
- | External Connector Type: RJ-45 | + | External Connector Type: RJ-45 |
- | Port Type: Network Port | + | Port Type: Network Port |
Handle 0x0011, DMI type 8, 9 bytes | Handle 0x0011, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: Not Specified | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: Access Bus (USB) | + | External Connector Type: Access Bus (USB) |
- | Port Type: USB | + | Port Type: USB |
Handle 0x0012, DMI type 8, 9 bytes | Handle 0x0012, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: Not Specified | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: Access Bus (USB) | + | External Connector Type: Access Bus (USB) |
- | Port Type: USB | + | Port Type: USB |
Handle 0x0013, DMI type 8, 9 bytes | Handle 0x0013, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: Not Specified | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: Access Bus (USB) | + | External Connector Type: Access Bus (USB) |
- | Port Type: USB | + | Port Type: USB |
Handle 0x0014, DMI type 8, 9 bytes | Handle 0x0014, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: Not Specified | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: Access Bus (USB) | + | External Connector Type: Access Bus (USB) |
- | Port Type: USB | + | Port Type: USB |
Handle 0x0015, DMI type 8, 9 bytes | Handle 0x0015, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: Not Specified | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: Access Bus (USB) | + | External Connector Type: Access Bus (USB) |
- | Port Type: USB | + | Port Type: USB |
Handle 0x0016, DMI type 8, 9 bytes | Handle 0x0016, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: Not Specified | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: Access Bus (USB) | + | External Connector Type: Access Bus (USB) |
- | Port Type: USB | + | Port Type: USB |
Handle 0x0017, DMI type 8, 9 bytes | Handle 0x0017, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: INT_USB1 | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: Access Bus (USB) | + | External Connector Type: Access Bus (USB) |
- | Port Type: USB | + | Port Type: USB |
Handle 0x0018, DMI type 8, 9 bytes | Handle 0x0018, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: INT_USB2 | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: Access Bus (USB) | + | External Connector Type: Access Bus (USB) |
- | Port Type: USB | + | Port Type: USB |
Handle 0x0019, DMI type 8, 9 bytes | Handle 0x0019, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: INT_SATA1 | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: SAS/SATA Plug Receptacle | + | External Connector Type: SAS/SATA Plug Receptacle |
- | Port Type: SATA | + | Port Type: SATA |
Handle 0x001A, DMI type 8, 9 bytes | Handle 0x001A, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: INT_SATA2 | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: SAS/SATA Plug Receptacle | + | External Connector Type: SAS/SATA Plug Receptacle |
- | Port Type: SATA | + | Port Type: SATA |
Handle 0x001B, DMI type 8, 9 bytes | Handle 0x001B, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: INT_SATA3 | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: SAS/SATA Plug Receptacle | + | External Connector Type: SAS/SATA Plug Receptacle |
- | Port Type: SATA | + | Port Type: SATA |
Handle 0x001C, DMI type 8, 9 bytes | Handle 0x001C, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: INT_SATA4 | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: SAS/SATA Plug Receptacle | + | External Connector Type: SAS/SATA Plug Receptacle |
- | Port Type: SATA | + | Port Type: SATA |
Handle 0x001D, DMI type 8, 9 bytes | Handle 0x001D, DMI type 8, 9 bytes | ||
Port Connector Information | Port Connector Information | ||
- | Internal Reference Designator: INT_SATA5 | + | |
- | Internal Connector Type: None | + | Internal Connector Type: None |
- | External Reference Designator: Not Specified | + | External Reference Designator: Not Specified |
- | External Connector Type: SAS/SATA Plug Receptacle | + | External Connector Type: SAS/SATA Plug Receptacle |
- | Port Type: SATA | + | Port Type: SATA |
Handle 0x001E, DMI type 9, 17 bytes | Handle 0x001E, DMI type 9, 17 bytes | ||
System Slot Information | System Slot Information | ||
- | Designation: | + | |
- | Type: x8 PCI Express 2 x8 | + | Type: x8 PCI Express 2 x8 |
- | Current Usage: In Use | + | Current Usage: In Use |
- | Length: Long | + | Length: Long |
- | ID: 1 | + | ID: 1 |
- | Characteristics: | + | Characteristics: |
- | + | 3.3 V is provided | |
- | 3.3 V is provided\\ | + | Opening is shared |
- | | + | PME signal is supported |
- | | + | Hot-plug devices are supported |
- | | + | Bus Address: 0000: |
- | + | ||
- | Bus Address: 0000: | + | |
Handle 0x001F, DMI type 9, 17 bytes | Handle 0x001F, DMI type 9, 17 bytes | ||
System Slot Information | System Slot Information | ||
- | Designation: | + | |
- | Type: x8 PCI Express 2 x16 | + | Type: x8 PCI Express 2 x16 |
- | Current Usage: Available | + | Current Usage: Available |
- | Length: Long | + | Length: Long |
- | ID: 2 | + | ID: 2 |
- | Characteristics: | + | Characteristics: |
- | + | 3.3 V is provided | |
- | 3.3 V is provided\\ | + | Opening is shared |
- | | + | PME signal is supported |
- | | + | Hot-plug devices are supported |
- | | + | Bus Address: 0000: |
- | + | ||
- | Bus Address: 0000: | + | |
Handle 0x0020, DMI type 9, 17 bytes | Handle 0x0020, DMI type 9, 17 bytes | ||
System Slot Information | System Slot Information | ||
- | Designation: | + | |
- | Type: x4 PCI Express 2 x8 | + | Type: x4 PCI Express 2 x8 |
- | Current Usage: Available | + | Current Usage: Available |
- | Length: Long | + | Length: Long |
- | ID: 3 | + | ID: 3 |
- | Characteristics: | + | Characteristics: |
- | + | 3.3 V is provided | |
- | 3.3 V is provided\\ | + | Opening is shared |
- | | + | PME signal is supported |
- | | + | Hot-plug devices are supported |
- | | + | Bus Address: 0000: |
- | + | ||
- | Bus Address: 0000: | + | |
Handle 0x0021, DMI type 9, 17 bytes | Handle 0x0021, DMI type 9, 17 bytes | ||
System Slot Information | System Slot Information | ||
- | Designation: | + | |
- | Type: x1 PCI Express 2 x1 | + | Type: x1 PCI Express 2 x1 |
- | Current Usage: Available | + | Current Usage: Available |
- | Length: Long | + | Length: Long |
- | ID: 4 | + | ID: 4 |
- | Characteristics: | + | Characteristics: |
- | + | 3.3 V is provided | |
- | 3.3 V is provided\\ | + | Opening is shared |
- | | + | PME signal is supported |
- | | + | Hot-plug devices are supported |
- | | + | Bus Address: 0000: |
- | + | ||
- | Bus Address: 0000: | + | |
Handle 0x0022, DMI type 10, 6 bytes | Handle 0x0022, DMI type 10, 6 bytes | ||
On Board Device Information | On Board Device Information | ||
- | Type: Video | + | |
- | Status: Enabled | + | Status: Enabled |
- | Description: | + | Description: |
Handle 0x0023, DMI type 10, 6 bytes | Handle 0x0023, DMI type 10, 6 bytes | ||
On Board Device Information | On Board Device Information | ||
- | Type: Ethernet | + | |
- | Status: Enabled | + | Status: Enabled |
- | Description: | + | Description: |
Handle 0x0024, DMI type 11, 5 bytes | Handle 0x0024, DMI type 11, 5 bytes | ||
OEM Strings | OEM Strings | ||
- | String 1: Dell System | + | |
- | String 2: 5[0000] | + | String 2: 5[0000] |
Handle 0x0025, DMI type 12, 5 bytes | Handle 0x0025, DMI type 12, 5 bytes | ||
System Configuration Options | System Configuration Options | ||
- | Option 1: NVRAM_CLR: Clear user settable NVRAM areas and set defaults | + | |
- | Option 2: PWRD_EN: Close to enable password | + | Option 2: PWRD_EN: |
Handle 0x0026, DMI type 13, 22 bytes | Handle 0x0026, DMI type 13, 22 bytes | ||
BIOS Language Information | BIOS Language Information | ||
- | Language Description Format: Long | + | |
- | Installable Languages: 1 | + | Installable Languages: 1 |
- | + | en|US|iso8859-1 | |
- | en|US|iso8859-1\\ | + | Currently Installed Language: en|US|iso8859-1 |
- | + | ||
- | Currently Installed Language: en|US|iso8859-1 | + | |
Handle 0x0027, DMI type 26, 22 bytes | Handle 0x0027, DMI type 26, 22 bytes | ||
Voltage Probe | Voltage Probe | ||
- | Description: | + | |
- | Location: Unknown | + | Location: Unknown |
- | Status: Unknown | + | Status: Unknown |
- | Maximum Value: Unknown | + | Maximum Value: Unknown |
- | Minimum Value: Unknown | + | Minimum Value: Unknown |
- | Resolution: Unknown | + | Resolution: Unknown |
- | Tolerance: Unknown | + | Tolerance: Unknown |
- | Accuracy: Unknown | + | Accuracy: Unknown |
- | OEM-specific Information: | + | OEM-specific Information: |
- | Nominal Value: Unknown | + | Nominal Value: Unknown |
Handle 0x0028, DMI type 32, 20 bytes | Handle 0x0028, DMI type 32, 20 bytes | ||
System Boot Information | System Boot Information | ||
- | Status: No errors detected | + | |
Handle 0x0029, DMI type 41, 11 bytes | Handle 0x0029, DMI type 41, 11 bytes | ||
Onboard Device | Onboard Device | ||
- | Reference Designation: | + | |
- | Type: Video | + | Type: Video |
- | Status: Enabled | + | Status: Enabled |
- | Type Instance: 1 | + | Type Instance: 1 |
- | Bus Address: 0000: | + | Bus Address: 0000: |
Handle 0x002A, DMI type 41, 11 bytes | Handle 0x002A, DMI type 41, 11 bytes | ||
Onboard Device | Onboard Device | ||
- | Reference Designation: | + | |
- | Type: Ethernet | + | Type: Ethernet |
- | Status: Enabled | + | Status: Enabled |
- | Type Instance: 1 | + | Type Instance: 1 |
- | Bus Address: 0000: | + | Bus Address: 0000: |
Handle 0x002B, DMI type 16, 23 bytes | Handle 0x002B, DMI type 16, 23 bytes | ||
Physical Memory Array | Physical Memory Array | ||
- | Location: System Board Or Motherboard | + | |
- | Use: System Memory | + | Use: System Memory |
- | Error Correction Type: Multi-bit ECC | + | Error Correction Type: Multi-bit ECC |
- | Maximum Capacity: 32 GB | + | Maximum Capacity: 32 GB |
- | Error Information Handle: No Error | + | Error Information Handle: No Error |
- | Number Of Devices: 4 | + | Number Of Devices: 4 |
Handle 0x002C, DMI type 17, 34 bytes | Handle 0x002C, DMI type 17, 34 bytes | ||
Memory Device | Memory Device | ||
- | Array Handle: 0x002B | + | |
- | Error Information Handle: | + | Error Information Handle: |
- | Total Width: | + | Total Width: |
- | Data Width: | + | Data Width: |
- | Size: No Module Installed | + | Size: 8192 MB |
- | Form Factor: DIMM | + | Form Factor: DIMM |
- | Set: None | + | Set: None |
- | Locator: DIMM A2 | + | Locator: DIMM A2 |
- | Bank Locator: BANK 0 | + | Bank Locator: BANK 0 |
- | Type: DDR3 | + | Type: DDR3 |
- | Type Detail: Unbuffered (Unregistered) | + | Type Detail: |
- | Speed: | + | Speed: |
- | Manufacturer: | + | Manufacturer: |
- | Serial Number: | + | Serial Number: |
- | Asset Tag: Not Specified | + | Asset Tag: 021312 |
- | Part Number: | + | Part Number: |
- | Rank: Unknown | + | Rank: 2 |
- | Configured | + | Configured |
Handle 0x002D, DMI type 17, 34 bytes | Handle 0x002D, DMI type 17, 34 bytes | ||
Memory Device | Memory Device | ||
- | Array Handle: 0x002B | + | |
- | Error Information Handle: No Error | + | Error Information Handle: No Error |
- | Total Width: 72 bits | + | Total Width: 72 bits |
- | Data Width: 64 bits | + | Data Width: 64 bits |
- | Size: 8192 MB | + | Size: 8192 MB |
- | Form Factor: DIMM | + | Form Factor: DIMM |
- | Set: None | + | Set: None |
- | Locator: DIMM A1 | + | Locator: DIMM A1 |
- | Bank Locator: BANK 1 | + | Bank Locator: BANK 1 |
- | Type: DDR3 | + | Type: DDR3 |
- | Type Detail: Synchronous Unbuffered (Unregistered) | + | Type Detail: Synchronous Unbuffered (Unregistered) |
- | Speed: 1600 MHz | + | Speed: 1600 MT/s |
- | Manufacturer: | + | Manufacturer: |
- | Serial Number: 35D83B79 | + | Serial Number: 35D83B79 |
- | Asset Tag: 021311 | + | Asset Tag: 021311 |
- | Part Number: M391B1G73BH0-CK0 | + | Part Number: M391B1G73BH0-CK0 |
- | Rank: 2 | + | Rank: 2 |
- | Configured | + | Configured |
Handle 0x002E, DMI type 17, 34 bytes | Handle 0x002E, DMI type 17, 34 bytes | ||
Memory Device | Memory Device | ||
- | Array Handle: 0x002B | + | |
- | Error Information Handle: | + | Error Information Handle: |
- | Total Width: | + | Total Width: |
- | Data Width: | + | Data Width: |
- | Size: No Module Installed | + | Size: 8192 MB |
- | Form Factor: DIMM | + | Form Factor: DIMM |
- | Set: None | + | Set: None |
- | Locator: DIMM B2 | + | Locator: DIMM B2 |
- | Bank Locator: BANK 2 | + | Bank Locator: BANK 2 |
- | Type: DDR3 | + | Type: DDR3 |
- | Type Detail: Unbuffered (Unregistered) | + | Type Detail: |
- | Speed: | + | Speed: |
- | Manufacturer: | + | Manufacturer: |
- | Serial Number: | + | Serial Number: |
- | Asset Tag: Not Specified | + | Asset Tag: 021310 |
- | Part Number: | + | Part Number: |
- | Rank: Unknown | + | Rank: 2 |
- | Configured | + | Configured |
Handle 0x002F, DMI type 17, 34 bytes | Handle 0x002F, DMI type 17, 34 bytes | ||
Memory Device | Memory Device | ||
- | Array Handle: 0x002B | + | |
- | Error Information Handle: No Error | + | Error Information Handle: No Error |
- | Total Width: 72 bits | + | Total Width: 72 bits |
- | Data Width: 64 bits | + | Data Width: 64 bits |
- | Size: 8192 MB | + | Size: 8192 MB |
- | Form Factor: DIMM | + | Form Factor: DIMM |
- | Set: None | + | Set: None |
- | Locator: DIMM B1 | + | Locator: DIMM B1 |
- | Bank Locator: BANK 3 | + | Bank Locator: BANK 3 |
- | Type: DDR3 | + | Type: DDR3 |
- | Type Detail: Synchronous Unbuffered (Unregistered) | + | Type Detail: Synchronous Unbuffered (Unregistered) |
- | Speed: 1600 MHz | + | Speed: 1600 MT/s |
- | Manufacturer: | + | Manufacturer: |
- | Serial Number: 35DD95B7 | + | Serial Number: 35DD95B7 |
- | Asset Tag: 021312 | + | Asset Tag: 021312 |
- | Part Number: M391B1G73BH0-YK0 | + | Part Number: M391B1G73BH0-YK0 |
- | Rank: 2 | + | Rank: 2 |
- | Configured | + | Configured |
Handle 0x0030, DMI type 19, 31 bytes | Handle 0x0030, DMI type 19, 31 bytes | ||
Memory Array Mapped Address | Memory Array Mapped Address | ||
- | Starting Address: 0x00000000000 | + | |
- | Ending Address: | + | Ending Address: |
- | Range Size: 16 GB | + | Range Size: 32 GB |
- | Physical Array Handle: 0x002B | + | Physical Array Handle: 0x002B |
- | Partition Width: 2 | + | Partition Width: 2 |
Handle 0x0031, DMI type 5, 20 bytes | Handle 0x0031, DMI type 5, 20 bytes | ||
Memory Controller Information | Memory Controller Information | ||
- | Error Detecting Method: None | + | |
- | Error Correcting Capabilities: | + | Error Correcting Capabilities: |
- | + | None | |
- | None\\ | + | Supported Interleave: One-way Interleave |
- | + | Current Interleave: One-way Interleave | |
- | Supported Interleave: One-way Interleave | + | Maximum Memory Module Size: 8192 MB |
- | Current Interleave: One-way Interleave | + | Maximum Total Memory Size: 16384 MB |
- | Maximum Memory Module Size: 8192 MB | + | Supported Speeds: |
- | Maximum Total Memory Size: 16384 MB | + | Other |
- | Supported Speeds: | + | Supported Memory Types: |
- | + | Other | |
- | Other\\ | + | Memory Module Voltage: Unknown |
- | + | Associated Memory Slots: 2 | |
- | Supported Memory Types: | + | 0xFFFF |
- | + | 0xFFFF | |
- | Other\\ | + | Enabled Error Correcting Capabilities: |
- | + | None | |
- | Memory Module Voltage: Unknown | + | |
- | Associated Memory Slots: 2 | + | |
- | + | ||
- | 0xFFFF\\ | + | |
- | | + | |
- | + | ||
- | Enabled Error Correcting Capabilities: | + | |
- | + | ||
- | None | + | |
Handle 0x0032, DMI type 38, 18 bytes | Handle 0x0032, DMI type 38, 18 bytes | ||
IPMI Device Information | IPMI Device Information | ||
- | Interface Type: KCS (Keyboard Control Style) | + | |
- | Specification Version: 2.0 | + | Specification Version: 2.0 |
- | I2C Slave Address: 0x10 | + | I2C Slave Address: 0x10 |
- | NV Storage Device: Not Present | + | NV Storage Device: Not Present |
- | Base Address: 0x0000000000000CA8 (I/O) | + | Base Address: 0x0000000000000CA8 (I/O) |
- | Register Spacing: 32-bit Boundaries | + | Register Spacing: 32-bit Boundaries |
Handle 0x0034, DMI type 212, 217 bytes | Handle 0x0034, DMI type 212, 217 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | D4 D9 34 00 70 00 71 00 00 49 4F 6C 28 40 48 F7 | |
- | D4 D9 34 00 70 00 71 00 00 49 4F 6C 28 40 48 F7\\ | + | 08 29 40 48 F7 00 2D 00 4E 3F 80 2E 00 4E 3F 00 |
- | | + | 42 00 49 EF 10 43 00 49 EF 00 5C 00 48 FD 02 5D |
- | | + | 00 48 FD 00 6E 00 4E 3F 40 83 00 76 00 00 84 00 |
- | | + | 77 00 00 9D 00 4B F7 08 9E 00 4B F7 00 9F 00 48 |
- | | + | BF 40 A0 00 48 BF 00 D8 00 4D EF 10 D9 00 4D EF |
- | | + | 00 DE 00 4B FB 04 DF 00 4B FB 00 17 01 4C FB 00 |
- | | + | 18 01 4C FB 04 19 01 4C F7 00 1A 01 4C F7 08 1B |
- | | + | 01 4C EF 00 1C 01 4C EF 10 1D 01 4C DF 00 1E 01 |
- | | + | 4C DF 20 1F 01 4C BF 00 20 01 4C BF 40 2D 01 48 |
- | | + | EF 10 2E 01 48 EF 00 35 01 4D FC 00 37 01 4D FC |
- | | + | 01 38 01 4D FC 02 39 01 4D FC 03 3B 01 4D F3 04 |
- | | + | 3C 01 4D F3 08 3D 01 4D F3 0C 40 01 49 BF 00 41 |
- | | + | 01 49 BF 40 FF FF 00 00 00 |
- | | + | |
Handle 0x0035, DMI type 212, 217 bytes | Handle 0x0035, DMI type 212, 217 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | D4 D9 35 00 70 00 71 00 00 49 4F 6C 4B 01 49 7F | |
- | D4 D9 35 00 70 00 71 00 00 49 4F 6C 4B 01 49 7F\\ | + | 80 4A 01 49 7F 00 6A 01 4A FC 00 6B 01 4A FC 01 |
- | | + | 6C 01 4A FC 03 6F 01 48 FB 00 70 01 48 FB 04 77 |
- | | + | 01 4A F3 00 78 01 4A F3 04 79 01 4A F3 08 7A 01 |
- | | + | 4A F3 0C DA 01 4E 3F C0 EA 01 4A DF 00 EB 01 4A |
- | | + | DF 20 FC 01 4A EF 00 FD 01 4A EF 10 11 02 4C 7F |
- | | + | 00 12 02 4C 7F 80 00 00 00 00 00 00 00 00 00 00 |
- | | + | 2D 02 4A BF 40 2E 02 4A BF 00 4B 02 4A 7F 80 4C |
- | | + | 02 4A 7F 00 4D 02 4B FD 02 4E 02 4B FD 00 54 02 |
- | | + | 4B EF 00 57 02 4B EF 10 9A 02 49 F7 00 9B 02 49 |
- | | + | F7 08 AD 02 4D BF 40 AE 02 4D BF 00 01 40 4B FE |
- | | + | 00 02 40 4B FE 01 1A 40 4B DF 00 1B 40 4B DF 20 |
- | | + | 1C 40 4B BF 40 1D 40 4B BF 00 22 40 48 7F 80 23 |
- | | + | 40 48 7F 00 FF FF 00 00 00 |
- | | + | |
Handle 0x0036, DMI type 212, 72 bytes | Handle 0x0036, DMI type 212, 72 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | D4 48 36 00 70 00 71 00 00 49 4F 6C 26 40 48 DF | |
- | D4 48 36 00 70 00 71 00 00 49 4F 6C 26 40 48 DF\\ | + | 20 27 40 48 DF 00 31 40 4B 7F 80 32 40 4B 7F 00 |
- | | + | 33 40 4C FC 00 34 40 4C FC 01 35 40 4C FC 02 36 |
- | | + | 40 4C FC 03 42 40 4D 7F 00 43 40 4D 7F 80 FF FF |
- | | + | 00 00 00 00 00 00 00 00 |
- | | + | |
Handle 0x0037, DMI type 212, 77 bytes | Handle 0x0037, DMI type 212, 77 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | D4 4D 37 00 72 00 73 00 00 00 00 00 00 00 00 00 | |
- | D4 4D 37 00 72 00 73 00 00 00 00 00 00 00 00 00\\ | + | 00 00 00 00 00 00 D3 00 00 00 00 D4 00 02 00 00 |
- | | + | 31 02 5F 79 80 32 02 5F 79 84 33 02 5F 79 82 6E |
- | | + | 02 5F 79 80 00 90 2C FF 00 01 90 2D FF 00 FF FF |
- | | + | 00 00 00 00 00 00 00 00 00 00 00 00 00 |
- | | + | |
Handle 0x0038, DMI type 212, 22 bytes | Handle 0x0038, DMI type 212, 22 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | D4 16 38 00 72 00 73 00 01 40 49 4A 00 C0 40 00 | |
- | D4 16 38 00 72 00 73 00 01 40 49 4A 00 C0 40 00\\ | + | 0A FF FF 00 00 00 |
- | | + | |
Handle 0x0039, DMI type 212, 22 bytes | Handle 0x0039, DMI type 212, 22 bytes | ||
OEM-specific Type | OEM-specific Type | ||
- | Header and Data: | + | |
- | + | D4 16 39 00 72 00 73 00 01 4C 52 53 03 C0 4C 00 | |
- | D4 16 39 00 72 00 73 00 01 4C 52 53 03 C0 4C 00\\ | + | 07 FF FF 00 00 00 |
- | | + | |
Handle 0x003A, DMI type 127, 4 bytes | Handle 0x003A, DMI type 127, 4 bytes | ||
End Of Table | End Of Table | ||
- | </ | ||
+ | </ | ||
===== Disques ===== | ===== Disques ===== | ||
Retour de la commande ssm list (system-storage-manager) : | Retour de la commande ssm list (system-storage-manager) : | ||
- | |||
< | < | ||
+ | |||
----------------------------------------------------------------- | ----------------------------------------------------------------- | ||
Device | Device | ||
Ligne 908: | Ligne 878: | ||
/ | / | ||
------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------- | ||
+ | |||
</ | </ | ||
+ | |||
==== Disque 0 sda ==== | ==== Disque 0 sda ==== | ||
Ligne 969: | Ligne 941: | ||
# 2 Background long | # 2 Background long | ||
Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | ||
+ | |||
</ | </ | ||
- | |||
==== Disque 1 sdb ==== | ==== Disque 1 sdb ==== | ||
Retour de la commande smartctl -a /dev/sdb : | Retour de la commande smartctl -a /dev/sdb : | ||
+ | < | ||
+ | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.36.3.el7.x86_64] (local build) | ||
+ | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Vendor: | ||
+ | Product: | ||
+ | Revision: | ||
+ | User Capacity: | ||
+ | Logical block size: 512 bytes | ||
+ | Rotation Rate: 15000 rpm | ||
+ | Form Factor: | ||
+ | Logical Unit id: 0x5000c50047e1d7e7 | ||
+ | Serial number: | ||
+ | Device type: disk | ||
+ | Transport protocol: | ||
+ | Local Time is: Wed Nov 30 18:55:26 2016 CET | ||
+ | SMART support is: | ||
+ | SMART support is: | ||
+ | Temperature Warning: | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART Health Status: OK | ||
+ | |||
+ | Current Drive Temperature: | ||
+ | Drive Trip Temperature: | ||
+ | |||
+ | Elements in grown defect list: 0 | ||
+ | |||
+ | Vendor (Seagate) cache information | ||
+ | Blocks sent to initiator = 3265923221 | ||
+ | Blocks received from initiator = 867006706 | ||
+ | Blocks read from cache and sent to initiator = 166472656 | ||
+ | Number of read and write commands whose size <= segment size = 324297990 | ||
+ | Number of read and write commands whose size> segment size = 356 | ||
+ | |||
+ | Vendor (Seagate/ | ||
+ | number of hours powered up = 10759.80 | ||
+ | number of minutes until next internal SMART test = 48 | ||
+ | |||
+ | Error counter log: | ||
+ | | ||
+ | | ||
+ | fast | delayed | ||
+ | read: | ||
+ | write: | ||
+ | verify: | ||
+ | |||
+ | Non-medium error count: | ||
+ | |||
+ | SMART Self-test log | ||
+ | Num Test Status | ||
+ | | ||
+ | # 1 Background short Completed | ||
+ | Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | ||
+ | |||
+ | </ | ||
==== Disque 2 sdc ==== | ==== Disque 2 sdc ==== | ||
Retour de la commande smartctl -a /dev/sdc : | Retour de la commande smartctl -a /dev/sdc : | ||
+ | < | ||
+ | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.36.3.el7.x86_64] (local build) | ||
+ | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Vendor: | ||
+ | Product: | ||
+ | Revision: | ||
+ | User Capacity: | ||
+ | Logical block size: 512 bytes | ||
+ | Rotation Rate: 15000 rpm | ||
+ | Form Factor: | ||
+ | Logical Unit id: 0x5000c5004839d43f | ||
+ | Serial number: | ||
+ | Device type: disk | ||
+ | Transport protocol: | ||
+ | Local Time is: Wed Nov 30 18:56:04 2016 CET | ||
+ | SMART support is: | ||
+ | SMART support is: | ||
+ | Temperature Warning: | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART Health Status: OK | ||
+ | |||
+ | Current Drive Temperature: | ||
+ | Drive Trip Temperature: | ||
+ | |||
+ | Elements in grown defect list: 0 | ||
+ | |||
+ | Vendor (Seagate) cache information | ||
+ | Blocks sent to initiator = 1984813050 | ||
+ | Blocks received from initiator = 2743448439 | ||
+ | Blocks read from cache and sent to initiator = 1312158443 | ||
+ | Number of read and write commands whose size <= segment size = 131266659 | ||
+ | Number of read and write commands whose size> segment size = 370 | ||
+ | |||
+ | Vendor (Seagate/ | ||
+ | number of hours powered up = 5446.08 | ||
+ | number of minutes until next internal SMART test = 48 | ||
+ | |||
+ | Error counter log: | ||
+ | | ||
+ | | ||
+ | fast | delayed | ||
+ | read: | ||
+ | write: | ||
+ | verify: | ||
+ | |||
+ | Non-medium error count: | ||
+ | |||
+ | SMART Self-test log | ||
+ | Num Test Status | ||
+ | | ||
+ | # 1 Background short Completed | ||
+ | Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | ||
+ | |||
+ | </ | ||
==== Disque 3 sdd ==== | ==== Disque 3 sdd ==== | ||
Retour de la commande smartctl -a /dev/sdd : | Retour de la commande smartctl -a /dev/sdd : | ||
+ | < | ||
+ | |||
+ | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.36.3.el7.x86_64] (local build) | ||
+ | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Vendor: | ||
+ | Product: | ||
+ | Revision: | ||
+ | User Capacity: | ||
+ | Logical block size: 512 bytes | ||
+ | Rotation Rate: 15000 rpm | ||
+ | Form Factor: | ||
+ | Logical Unit id: 0x5000c50047170bf3 | ||
+ | Serial number: | ||
+ | Device type: disk | ||
+ | Transport protocol: | ||
+ | Local Time is: Wed Nov 30 18:56:43 2016 CET | ||
+ | SMART support is: | ||
+ | SMART support is: | ||
+ | Temperature Warning: | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART Health Status: OK | ||
+ | |||
+ | Current Drive Temperature: | ||
+ | Drive Trip Temperature: | ||
+ | |||
+ | Elements in grown defect list: 0 | ||
+ | |||
+ | Vendor (Seagate) cache information | ||
+ | Blocks sent to initiator = 3289963359 | ||
+ | Blocks received from initiator = 3428614898 | ||
+ | Blocks read from cache and sent to initiator = 3696105612 | ||
+ | Number of read and write commands whose size <= segment size = 312766464 | ||
+ | Number of read and write commands whose size> segment size = 350 | ||
+ | |||
+ | Vendor (Seagate/ | ||
+ | number of hours powered up = 10464.65 | ||
+ | number of minutes until next internal SMART test = 47 | ||
+ | |||
+ | Error counter log: | ||
+ | | ||
+ | | ||
+ | fast | delayed | ||
+ | read: | ||
+ | write: | ||
+ | verify: | ||
+ | |||
+ | Non-medium error count: | ||
+ | |||
+ | SMART Self-test log | ||
+ | Num Test Status | ||
+ | | ||
+ | # 1 Background short Completed | ||
+ | Long (extended) Self Test duration: 3200 seconds [53.3 minutes] | ||
+ | |||
+ | </ | ||
+ | ==== Log de démarrage ==== | ||
+ | |||
+ | sortie dmesg: | ||
+ | < | ||
+ | |||
+ | [mai24 18:17] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 | ||
+ | [ +0,000000] Initializing cgroup subsys cpuset | ||
+ | [ +0,000000] Initializing cgroup subsys cpu | ||
+ | [ +0,000000] Initializing cgroup subsys cpuacct | ||
+ | [ +0,000000] Linux version 3.10.0-1127.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC) ) #1 SMP Tue Mar 31 23:36:51 UTC 2020 | ||
+ | [ +0,000000] Command line: BOOT_IMAGE=/ | ||
+ | [ +0,000000] e820: BIOS-provided physical RAM map: | ||
+ | [ +0,000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable | ||
+ | [ +0,000000] BIOS-e820: [mem 0x0000000000100000-0x00000000baa57fff] usable | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000baa58000-0x00000000baa59fff] reserved | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000baa5a000-0x00000000baa86fff] usable | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000baa87000-0x00000000baa89fff] reserved | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000baa8a000-0x00000000bb3a8fff] usable | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000bb3a9000-0x00000000bb3b7fff] reserved | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000bb3b8000-0x00000000bdfaffff] usable | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000bdfb0000-0x00000000bf3affff] reserved | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000bf3b0000-0x00000000bf4befff] usable | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000bf4bf000-0x00000000bf6befff] reserved | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7effff] ACPI data | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000bf7f0000-0x00000000bf7fffff] usable | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved | ||
+ | [ +0,000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved | ||
+ | [ +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable | ||
+ | [ +0,000000] NX (Execute Disable) protection: active | ||
+ | [ +0,000000] e820: update [mem 0xba9eb018-0xbaa06257] usable ==> usable | ||
+ | [ +0,000000] e820: update [mem 0xbaa43018-0xbaa4c457] usable ==> usable | ||
+ | [ +0,000000] e820: update [mem 0xba9e2018-0xba9ea057] usable ==> usable | ||
+ | [ +0,000000] extended physical RAM map: | ||
+ | [ +0,000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x0000000000100000-0x00000000ba9e2017] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000ba9e2018-0x00000000ba9ea057] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000ba9ea058-0x00000000ba9eb017] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000ba9eb018-0x00000000baa06257] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000baa06258-0x00000000baa43017] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000baa43018-0x00000000baa4c457] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000baa4c458-0x00000000baa57fff] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000baa58000-0x00000000baa59fff] reserved | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000baa5a000-0x00000000baa86fff] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000baa87000-0x00000000baa89fff] reserved | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000baa8a000-0x00000000bb3a8fff] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000bb3a9000-0x00000000bb3b7fff] reserved | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000bb3b8000-0x00000000bdfaffff] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000bdfb0000-0x00000000bf3affff] reserved | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000bf3b0000-0x00000000bf4befff] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000bf4bf000-0x00000000bf6befff] reserved | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000bf7bf000-0x00000000bf7effff] ACPI data | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000bf7f0000-0x00000000bf7fffff] usable | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved | ||
+ | [ +0,000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved | ||
+ | [ +0,000000] reserve setup_data: [mem 0x0000000100000000-0x000000083fffffff] usable | ||
+ | [ +0,000000] efi: EFI v2.10 by Dell | ||
+ | [ +0,000000] efi: SMBIOS=0xbf6aef98 | ||
+ | [ +0,000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) | ||
+ | [ +0,000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000002000) (0MB) | ||
+ | [ +0,000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000002000-0x000000000000e000) (0MB) | ||
+ | [ +0,000000] efi: mem03: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB) | ||
+ | [ +0,000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000010000-0x000000000004e000) (0MB) | ||
+ | [ +0,000000] efi: mem05: type=3, attr=0xf, range=[0x000000000004e000-0x000000000004f000) (0MB) | ||
+ | [ +0,000000] efi: mem06: type=4, attr=0xf, range=[0x000000000004f000-0x0000000000050000) (0MB) | ||
+ | [ +0,000000] efi: mem07: type=3, attr=0xf, range=[0x0000000000050000-0x000000000008f000) (0MB) | ||
+ | [ +0,000000] efi: mem08: type=4, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) | ||
+ | [ +0,000000] efi: mem09: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB) | ||
+ | [ +0,000000] efi: mem10: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB) | ||
+ | [ +0,000000] efi: mem11: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB) | ||
+ | [ +0,000000] efi: mem12: type=2, attr=0xf, range=[0x0000000001000000-0x0000000003161000) (33MB) | ||
+ | [ +0,000000] efi: mem13: type=7, attr=0xf, range=[0x0000000003161000-0x000000003ebca000) (954MB) | ||
+ | [ +0,000000] efi: mem14: type=2, attr=0xf, range=[0x000000003ebca000-0x0000000040000000) (20MB) | ||
+ | [ +0,000000] efi: mem15: type=7, attr=0xf, range=[0x0000000040000000-0x000000008bc2b000) (1212MB) | ||
+ | [ +0,000000] efi: mem16: type=2, attr=0xf, range=[0x000000008bc2b000-0x00000000ba437000) (744MB) | ||
+ | [ +0,000000] efi: mem17: type=1, attr=0xf, range=[0x00000000ba437000-0x00000000ba650000) (2MB) | ||
+ | [ +0,000000] efi: mem18: type=7, attr=0xf, range=[0x00000000ba650000-0x00000000ba66c000) (0MB) | ||
+ | [ +0,000000] efi: mem19: type=2, attr=0xf, range=[0x00000000ba66c000-0x00000000ba777000) (1MB) | ||
+ | [ +0,000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ba777000-0x00000000ba7aa000) (0MB) | ||
+ | [ +0,000000] efi: mem21: type=7, attr=0xf, range=[0x00000000ba7aa000-0x00000000ba7dd000) (0MB) | ||
+ | [ +0,000000] efi: mem22: type=4, attr=0xf, range=[0x00000000ba7dd000-0x00000000ba841000) (0MB) | ||
+ | [ +0,000000] efi: mem23: type=7, attr=0xf, range=[0x00000000ba841000-0x00000000ba873000) (0MB) | ||
+ | [ +0,000000] efi: mem24: type=4, attr=0xf, range=[0x00000000ba873000-0x00000000ba939000) (0MB) | ||
+ | [ +0,000000] efi: mem25: type=7, attr=0xf, range=[0x00000000ba939000-0x00000000ba96a000) (0MB) | ||
+ | [ +0,000000] efi: mem26: type=4, attr=0xf, range=[0x00000000ba96a000-0x00000000ba9cc000) (0MB) | ||
+ | [ +0,000000] efi: mem27: type=7, attr=0xf, range=[0x00000000ba9cc000-0x00000000ba9e2000) (0MB) | ||
+ | [ +0,000000] efi: mem28: type=2, attr=0xf, range=[0x00000000ba9e2000-0x00000000baa07000) (0MB) | ||
+ | [ +0,000000] efi: mem29: type=4, attr=0xf, range=[0x00000000baa07000-0x00000000baa3f000) (0MB) | ||
+ | [ +0,000000] efi: mem30: type=7, attr=0xf, range=[0x00000000baa3f000-0x00000000baa43000) (0MB) | ||
+ | [ +0,000000] efi: mem31: type=2, attr=0xf, range=[0x00000000baa43000-0x00000000baa4d000) (0MB) | ||
+ | [ +0,000000] efi: mem32: type=4, attr=0xf, range=[0x00000000baa4d000-0x00000000baa55000) (0MB) | ||
+ | [ +0,000000] efi: mem33: type=3, attr=0xf, range=[0x00000000baa55000-0x00000000baa57000) (0MB) | ||
+ | [ +0,000000] efi: mem34: type=4, attr=0xf, range=[0x00000000baa57000-0x00000000baa58000) (0MB) | ||
+ | [ +0,000000] efi: mem35: type=5, attr=0x800000000000000f, | ||
+ | [ +0,000000] efi: mem36: type=3, attr=0xf, range=[0x00000000baa5a000-0x00000000baa5d000) (0MB) | ||
+ | [ +0,000000] efi: mem37: type=4, attr=0xf, range=[0x00000000baa5d000-0x00000000baa87000) (0MB) | ||
+ | [ +0,000000] efi: mem38: type=5, attr=0x800000000000000f, | ||
+ | [ +0,000000] efi: mem39: type=4, attr=0xf, range=[0x00000000baa8a000-0x00000000baa8b000) (0MB) | ||
+ | [ +0,000000] efi: mem40: type=3, attr=0xf, range=[0x00000000baa8b000-0x00000000baa8f000) (0MB) | ||
+ | [ +0,000000] efi: mem41: type=4, attr=0xf, range=[0x00000000baa8f000-0x00000000baaa5000) (0MB) | ||
+ | [ +0,000000] efi: mem42: type=3, attr=0xf, range=[0x00000000baaa5000-0x00000000baaa6000) (0MB) | ||
+ | [ +0,000000] efi: mem43: type=4, attr=0xf, range=[0x00000000baaa6000-0x00000000bb2f2000) (8MB) | ||
+ | [ +0,000000] efi: mem44: type=7, attr=0xf, range=[0x00000000bb2f2000-0x00000000bb2f4000) (0MB) | ||
+ | [ +0,000000] efi: mem45: type=2, attr=0xf, range=[0x00000000bb2f4000-0x00000000bb2f7000) (0MB) | ||
+ | [ +0,000000] efi: mem46: type=3, attr=0xf, range=[0x00000000bb2f7000-0x00000000bb32f000) (0MB) | ||
+ | [ +0,000000] efi: mem47: type=4, attr=0xf, range=[0x00000000bb32f000-0x00000000bb38c000) (0MB) | ||
+ | [ +0,000000] efi: mem48: type=7, attr=0xf, range=[0x00000000bb38c000-0x00000000bb38d000) (0MB) | ||
+ | [ +0,000000] efi: mem49: type=4, attr=0xf, range=[0x00000000bb38d000-0x00000000bb38f000) (0MB) | ||
+ | [ +0,000000] efi: mem50: type=2, attr=0xf, range=[0x00000000bb38f000-0x00000000bb391000) (0MB) | ||
+ | [ +0,000000] efi: mem51: type=4, attr=0xf, range=[0x00000000bb391000-0x00000000bb39c000) (0MB) | ||
+ | [ +0,000000] efi: mem52: type=3, attr=0xf, range=[0x00000000bb39c000-0x00000000bb39e000) (0MB) | ||
+ | [ +0,000000] efi: mem53: type=4, attr=0xf, range=[0x00000000bb39e000-0x00000000bb3a3000) (0MB) | ||
+ | [ +0,000000] efi: mem54: type=3, attr=0xf, range=[0x00000000bb3a3000-0x00000000bb3a8000) (0MB) | ||
+ | [ +0,000000] efi: mem55: type=4, attr=0xf, range=[0x00000000bb3a8000-0x00000000bb3a9000) (0MB) | ||
+ | [ +0,000000] efi: mem56: type=5, attr=0x800000000000000f, | ||
+ | [ +0,000000] efi: mem57: type=4, attr=0xf, range=[0x00000000bb3b8000-0x00000000bb3ba000) (0MB) | ||
+ | [ +0,000000] efi: mem58: type=3, attr=0xf, range=[0x00000000bb3ba000-0x00000000bb3bd000) (0MB) | ||
+ | [ +0,000000] efi: mem59: type=4, attr=0xf, range=[0x00000000bb3bd000-0x00000000bb3c0000) (0MB) | ||
+ | [ +0,000000] efi: mem60: type=3, attr=0xf, range=[0x00000000bb3c0000-0x00000000bb3c1000) (0MB) | ||
+ | [ +0,000000] efi: mem61: type=4, attr=0xf, range=[0x00000000bb3c1000-0x00000000bb40a000) (0MB) | ||
+ | [ +0,000000] efi: mem62: type=3, attr=0xf, range=[0x00000000bb40a000-0x00000000bb40b000) (0MB) | ||
+ | [ +0,000000] efi: mem63: type=4, attr=0xf, range=[0x00000000bb40b000-0x00000000bb40d000) (0MB) | ||
+ | [ +0,000000] efi: mem64: type=3, attr=0xf, range=[0x00000000bb40d000-0x00000000bb40e000) (0MB) | ||
+ | [ +0,000000] efi: mem65: type=4, attr=0xf, range=[0x00000000bb40e000-0x00000000bb410000) (0MB) | ||
+ | [ +0,000000] efi: mem66: type=3, attr=0xf, range=[0x00000000bb410000-0x00000000bb412000) (0MB) | ||
+ | [ +0,000000] efi: mem67: type=4, attr=0xf, range=[0x00000000bb412000-0x00000000bb413000) (0MB) | ||
+ | [ +0,000000] efi: mem68: type=3, attr=0xf, range=[0x00000000bb413000-0x00000000bb417000) (0MB) | ||
+ | [ +0,000000] efi: mem69: type=4, attr=0xf, range=[0x00000000bb417000-0x00000000bb427000) (0MB) | ||
+ | [ +0,000000] efi: mem70: type=3, attr=0xf, range=[0x00000000bb427000-0x00000000bb437000) (0MB) | ||
+ | [ +0,000000] efi: mem71: type=4, attr=0xf, range=[0x00000000bb437000-0x00000000bb43b000) (0MB) | ||
+ | [ +0,000000] efi: mem72: type=3, attr=0xf, range=[0x00000000bb43b000-0x00000000bb44b000) (0MB) | ||
+ | [ +0,000000] efi: mem73: type=4, attr=0xf, range=[0x00000000bb44b000-0x00000000bb44d000) (0MB) | ||
+ | [ +0,000000] efi: mem74: type=3, attr=0xf, range=[0x00000000bb44d000-0x00000000bb44f000) (0MB) | ||
+ | [ +0,000000] efi: mem75: type=4, attr=0xf, range=[0x00000000bb44f000-0x00000000bb46e000) (0MB) | ||
+ | [ +0,000000] efi: mem76: type=3, attr=0xf, range=[0x00000000bb46e000-0x00000000bb470000) (0MB) | ||
+ | [ +0,000000] efi: mem77: type=4, attr=0xf, range=[0x00000000bb470000-0x00000000bb471000) (0MB) | ||
+ | [ +0,000000] efi: mem78: type=3, attr=0xf, range=[0x00000000bb471000-0x00000000bb477000) (0MB) | ||
+ | [ +0,000000] efi: mem79: type=4, attr=0xf, range=[0x00000000bb477000-0x00000000bb47a000) (0MB) | ||
+ | [ +0,000000] efi: mem80: type=3, attr=0xf, range=[0x00000000bb47a000-0x00000000bb491000) (0MB) | ||
+ | [ +0,000000] efi: mem81: type=4, attr=0xf, range=[0x00000000bb491000-0x00000000bb494000) (0MB) | ||
+ | [ +0,000000] efi: mem82: type=3, attr=0xf, range=[0x00000000bb494000-0x00000000bb498000) (0MB) | ||
+ | [ +0,000000] efi: mem83: type=4, attr=0xf, range=[0x00000000bb498000-0x00000000bb499000) (0MB) | ||
+ | [ +0,000000] efi: mem84: type=3, attr=0xf, range=[0x00000000bb499000-0x00000000bb49a000) (0MB) | ||
+ | [ +0,000000] efi: mem85: type=4, attr=0xf, range=[0x00000000bb49a000-0x00000000bb49b000) (0MB) | ||
+ | [ +0,000000] efi: mem86: type=3, attr=0xf, range=[0x00000000bb49b000-0x00000000bb49c000) (0MB) | ||
+ | [ +0,000000] efi: mem87: type=4, attr=0xf, range=[0x00000000bb49c000-0x00000000bb4a8000) (0MB) | ||
+ | [ +0,000000] efi: mem88: type=3, attr=0xf, range=[0x00000000bb4a8000-0x00000000bb4ee000) (0MB) | ||
+ | [ +0,000000] efi: mem89: type=4, attr=0xf, range=[0x00000000bb4ee000-0x00000000bb4f5000) (0MB) | ||
+ | [ +0,000000] efi: mem90: type=3, attr=0xf, range=[0x00000000bb4f5000-0x00000000bb4fb000) (0MB) | ||
+ | [ +0,000000] efi: mem91: type=4, attr=0xf, range=[0x00000000bb4fb000-0x00000000bb4fc000) (0MB) | ||
+ | [ +0,000000] efi: mem92: type=3, attr=0xf, range=[0x00000000bb4fc000-0x00000000bb50b000) (0MB) | ||
+ | [ +0,000000] efi: mem93: type=4, attr=0xf, range=[0x00000000bb50b000-0x00000000bb50d000) (0MB) | ||
+ | [ +0,000000] efi: mem94: type=3, attr=0xf, range=[0x00000000bb50d000-0x00000000bb513000) (0MB) | ||
+ | [ +0,000000] efi: mem95: type=4, attr=0xf, range=[0x00000000bb513000-0x00000000bb514000) (0MB) | ||
+ | [ +0,000000] efi: mem96: type=3, attr=0xf, range=[0x00000000bb514000-0x00000000bb51a000) (0MB) | ||
+ | [ +0,000000] efi: mem97: type=4, attr=0xf, range=[0x00000000bb51a000-0x00000000bb51b000) (0MB) | ||
+ | [ +0,000000] efi: mem98: type=3, attr=0xf, range=[0x00000000bb51b000-0x00000000bb51c000) (0MB) | ||
+ | [ +0,000000] efi: mem99: type=4, attr=0xf, range=[0x00000000bb51c000-0x00000000bb51d000) (0MB) | ||
+ | [ +0,000000] efi: mem100: type=3, attr=0xf, range=[0x00000000bb51d000-0x00000000bb52e000) (0MB) | ||
+ | [ +0,000000] efi: mem101: type=4, attr=0xf, range=[0x00000000bb52e000-0x00000000bb534000) (0MB) | ||
+ | [ +0,000000] efi: mem102: type=3, attr=0xf, range=[0x00000000bb534000-0x00000000bb53f000) (0MB) | ||
+ | [ +0,000000] efi: mem103: type=4, attr=0xf, range=[0x00000000bb53f000-0x00000000bb541000) (0MB) | ||
+ | [ +0,000000] efi: mem104: type=3, attr=0xf, range=[0x00000000bb541000-0x00000000bb54e000) (0MB) | ||
+ | [ +0,000000] efi: mem105: type=4, attr=0xf, range=[0x00000000bb54e000-0x00000000bb54f000) (0MB) | ||
+ | [ +0,000000] efi: mem106: type=3, attr=0xf, range=[0x00000000bb54f000-0x00000000bb552000) (0MB) | ||
+ | [ +0,000000] efi: mem107: type=4, attr=0xf, range=[0x00000000bb552000-0x00000000bb557000) (0MB) | ||
+ | [ +0,000000] efi: mem108: type=3, attr=0xf, range=[0x00000000bb557000-0x00000000bb565000) (0MB) | ||
+ | [ +0,000000] efi: mem109: type=4, attr=0xf, range=[0x00000000bb565000-0x00000000bb605000) (0MB) | ||
+ | [ +0,000000] efi: mem110: type=2, attr=0xf, range=[0x00000000bb605000-0x00000000bb606000) (0MB) | ||
+ | [ +0,000000] efi: mem111: type=4, attr=0xf, range=[0x00000000bb606000-0x00000000bb916000) (3MB) | ||
+ | [ +0,000000] efi: mem112: type=3, attr=0xf, range=[0x00000000bb916000-0x00000000bb91f000) (0MB) | ||
+ | [ +0,000000] efi: mem113: type=4, attr=0xf, range=[0x00000000bb91f000-0x00000000bb926000) (0MB) | ||
+ | [ +0,000000] efi: mem114: type=3, attr=0xf, range=[0x00000000bb926000-0x00000000bb947000) (0MB) | ||
+ | [ +0,000000] efi: mem115: type=4, attr=0xf, range=[0x00000000bb947000-0x00000000bb949000) (0MB) | ||
+ | [ +0,000000] efi: mem116: type=3, attr=0xf, range=[0x00000000bb949000-0x00000000bb94c000) (0MB) | ||
+ | [ +0,000000] efi: mem117: type=4, attr=0xf, range=[0x00000000bb94c000-0x00000000bb94e000) (0MB) | ||
+ | [ +0,000000] efi: mem118: type=3, attr=0xf, range=[0x00000000bb94e000-0x00000000bb960000) (0MB) | ||
+ | [ +0,000000] efi: mem119: type=4, attr=0xf, range=[0x00000000bb960000-0x00000000bb962000) (0MB) | ||
+ | [ +0,000000] efi: mem120: type=3, attr=0xf, range=[0x00000000bb962000-0x00000000bb967000) (0MB) | ||
+ | [ +0,000000] efi: mem121: type=4, attr=0xf, range=[0x00000000bb967000-0x00000000bb968000) (0MB) | ||
+ | [ +0,000000] efi: mem122: type=3, attr=0xf, range=[0x00000000bb968000-0x00000000bb96b000) (0MB) | ||
+ | [ +0,000000] efi: mem123: type=4, attr=0xf, range=[0x00000000bb96b000-0x00000000bb96d000) (0MB) | ||
+ | [ +0,000000] efi: mem124: type=3, attr=0xf, range=[0x00000000bb96d000-0x00000000bb974000) (0MB) | ||
+ | [ +0,000000] efi: mem125: type=4, attr=0xf, range=[0x00000000bb974000-0x00000000bb978000) (0MB) | ||
+ | [ +0,000000] efi: mem126: type=3, attr=0xf, range=[0x00000000bb978000-0x00000000bb97f000) (0MB) | ||
+ | [ +0,000000] efi: mem127: type=4, attr=0xf, range=[0x00000000bb97f000-0x00000000bb981000) (0MB) | ||
+ | [ +0,000000] efi: mem128: type=3, attr=0xf, range=[0x00000000bb981000-0x00000000bb98a000) (0MB) | ||
+ | [ +0,000000] efi: mem129: type=4, attr=0xf, range=[0x00000000bb98a000-0x00000000bb98e000) (0MB) | ||
+ | [ +0,000000] efi: mem130: type=3, attr=0xf, range=[0x00000000bb98e000-0x00000000bb996000) (0MB) | ||
+ | [ +0,000000] efi: mem131: type=4, attr=0xf, range=[0x00000000bb996000-0x00000000bb99a000) (0MB) | ||
+ | [ +0,000000] efi: mem132: type=3, attr=0xf, range=[0x00000000bb99a000-0x00000000bb99d000) (0MB) | ||
+ | [ +0,000000] efi: mem133: type=4, attr=0xf, range=[0x00000000bb99d000-0x00000000bb9a0000) (0MB) | ||
+ | [ +0,000000] efi: mem134: type=3, attr=0xf, range=[0x00000000bb9a0000-0x00000000bb9ae000) (0MB) | ||
+ | [ +0,000000] efi: mem135: type=4, attr=0xf, range=[0x00000000bb9ae000-0x00000000bb9b0000) (0MB) | ||
+ | [ +0,000000] efi: mem136: type=3, attr=0xf, range=[0x00000000bb9b0000-0x00000000bb9b3000) (0MB) | ||
+ | [ +0,000000] efi: mem137: type=4, attr=0xf, range=[0x00000000bb9b3000-0x00000000bb9b4000) (0MB) | ||
+ | [ +0,000000] efi: mem138: type=3, attr=0xf, range=[0x00000000bb9b4000-0x00000000bb9b5000) (0MB) | ||
+ | [ +0,000000] efi: mem139: type=4, attr=0xf, range=[0x00000000bb9b5000-0x00000000bb9b9000) (0MB) | ||
+ | [ +0,000000] efi: mem140: type=3, attr=0xf, range=[0x00000000bb9b9000-0x00000000bb9bb000) (0MB) | ||
+ | [ +0,000000] efi: mem141: type=4, attr=0xf, range=[0x00000000bb9bb000-0x00000000bb9bf000) (0MB) | ||
+ | [ +0,000000] efi: mem142: type=3, attr=0xf, range=[0x00000000bb9bf000-0x00000000bb9c4000) (0MB) | ||
+ | [ +0,000000] efi: mem143: type=4, attr=0xf, range=[0x00000000bb9c4000-0x00000000bb9c5000) (0MB) | ||
+ | [ +0,000000] efi: mem144: type=3, attr=0xf, range=[0x00000000bb9c5000-0x00000000bb9cb000) (0MB) | ||
+ | [ +0,000000] efi: mem145: type=4, attr=0xf, range=[0x00000000bb9cb000-0x00000000bb9e2000) (0MB) | ||
+ | [ +0,000000] efi: mem146: type=3, attr=0xf, range=[0x00000000bb9e2000-0x00000000bb9ed000) (0MB) | ||
+ | [ +0,000000] efi: mem147: type=4, attr=0xf, range=[0x00000000bb9ed000-0x00000000bb9ee000) (0MB) | ||
+ | [ +0,000000] efi: mem148: type=3, attr=0xf, range=[0x00000000bb9ee000-0x00000000bb9f0000) (0MB) | ||
+ | [ +0,000000] efi: mem149: type=4, attr=0xf, range=[0x00000000bb9f0000-0x00000000bba09000) (0MB) | ||
+ | [ +0,000000] efi: mem150: type=3, attr=0xf, range=[0x00000000bba09000-0x00000000bba19000) (0MB) | ||
+ | [ +0,000000] efi: mem151: type=4, attr=0xf, range=[0x00000000bba19000-0x00000000bba1a000) (0MB) | ||
+ | [ +0,000000] efi: mem152: type=3, attr=0xf, range=[0x00000000bba1a000-0x00000000bba23000) (0MB) | ||
+ | [ +0,000000] efi: mem153: type=4, attr=0xf, range=[0x00000000bba23000-0x00000000bba26000) (0MB) | ||
+ | [ +0,000000] efi: mem154: type=3, attr=0xf, range=[0x00000000bba26000-0x00000000bba65000) (0MB) | ||
+ | [ +0,000000] efi: mem155: type=4, attr=0xf, range=[0x00000000bba65000-0x00000000bba6c000) (0MB) | ||
+ | [ +0,000000] efi: mem156: type=3, attr=0xf, range=[0x00000000bba6c000-0x00000000bba6f000) (0MB) | ||
+ | [ +0,000000] efi: mem157: type=4, attr=0xf, range=[0x00000000bba6f000-0x00000000bba75000) (0MB) | ||
+ | [ +0,000000] efi: mem158: type=3, attr=0xf, range=[0x00000000bba75000-0x00000000bba77000) (0MB) | ||
+ | [ +0,000000] efi: mem159: type=4, attr=0xf, range=[0x00000000bba77000-0x00000000bba78000) (0MB) | ||
+ | [ +0,000000] efi: mem160: type=3, attr=0xf, range=[0x00000000bba78000-0x00000000bba7c000) (0MB) | ||
+ | [ +0,000000] efi: mem161: type=4, attr=0xf, range=[0x00000000bba7c000-0x00000000bba7f000) (0MB) | ||
+ | [ +0,000000] efi: mem162: type=3, attr=0xf, range=[0x00000000bba7f000-0x00000000bbaf0000) (0MB) | ||
+ | [ +0,000000] efi: mem163: type=4, attr=0xf, range=[0x00000000bbaf0000-0x00000000bbaf4000) (0MB) | ||
+ | [ +0,000000] efi: mem164: type=3, attr=0xf, range=[0x00000000bbaf4000-0x00000000bbaf7000) (0MB) | ||
+ | [ +0,000000] efi: mem165: type=4, attr=0xf, range=[0x00000000bbaf7000-0x00000000bbaf8000) (0MB) | ||
+ | [ +0,000000] efi: mem166: type=3, attr=0xf, range=[0x00000000bbaf8000-0x00000000bbb10000) (0MB) | ||
+ | [ +0,000000] efi: mem167: type=4, attr=0xf, range=[0x00000000bbb10000-0x00000000bbb13000) (0MB) | ||
+ | [ +0,000000] efi: mem168: type=3, attr=0xf, range=[0x00000000bbb13000-0x00000000bbb29000) (0MB) | ||
+ | [ +0,000000] efi: mem169: type=4, attr=0xf, range=[0x00000000bbb29000-0x00000000bbb9d000) (0MB) | ||
+ | [ +0,000000] efi: mem170: type=3, attr=0xf, range=[0x00000000bbb9d000-0x00000000bbba3000) (0MB) | ||
+ | [ +0,000000] efi: mem171: type=4, attr=0xf, range=[0x00000000bbba3000-0x00000000bbba4000) (0MB) | ||
+ | [ +0,000000] efi: mem172: type=3, attr=0xf, range=[0x00000000bbba4000-0x00000000bbba5000) (0MB) | ||
+ | [ +0,000000] efi: mem173: type=4, attr=0xf, range=[0x00000000bbba5000-0x00000000bbba6000) (0MB) | ||
+ | [ +0,000000] efi: mem174: type=3, attr=0xf, range=[0x00000000bbba6000-0x00000000bbbaa000) (0MB) | ||
+ | [ +0,000000] efi: mem175: type=4, attr=0xf, range=[0x00000000bbbaa000-0x00000000bbbab000) (0MB) | ||
+ | [ +0,000000] efi: mem176: type=3, attr=0xf, range=[0x00000000bbbab000-0x00000000bbbc1000) (0MB) | ||
+ | [ +0,000000] efi: mem177: type=4, attr=0xf, range=[0x00000000bbbc1000-0x00000000bdfb0000) (35MB) | ||
+ | [ +0,000000] efi: mem178: type=0, attr=0xf, range=[0x00000000bdfb0000-0x00000000bf3b0000) (20MB) | ||
+ | [ +0,000000] efi: mem179: type=4, attr=0xf, range=[0x00000000bf3b0000-0x00000000bf3bf000) (0MB) | ||
+ | [ +0,000000] efi: mem180: type=3, attr=0xf, range=[0x00000000bf3bf000-0x00000000bf4bf000) (1MB) | ||
+ | [ +0,000000] efi: mem181: type=5, attr=0x800000000000000f, | ||
+ | [ +0,000000] efi: mem182: type=5, attr=0x800000000000000f, | ||
+ | [ +0,000000] efi: mem183: type=6, attr=0x800000000000000f, | ||
+ | [ +0,000000] efi: mem184: type=0, attr=0xf, range=[0x00000000bf5db000-0x00000000bf5dd000) (0MB) | ||
+ | [ +0,000000] efi: mem185: type=6, attr=0x800000000000000f, | ||
+ | [ +0,000000] efi: mem186: type=0, attr=0xf, range=[0x00000000bf5eb000-0x00000000bf5ef000) (0MB) | ||
+ | [ +0,000000] efi: mem187: type=6, attr=0x800000000000000f, | ||
+ | [ +0,000000] efi: mem188: type=0, attr=0xf, range=[0x00000000bf5f0000-0x00000000bf601000) (0MB) | ||
+ | [ +0,000000] efi: mem189: type=6, attr=0x800000000000000f, | ||
+ | [ +0,000000] efi: mem190: type=6, attr=0x800000000000000f, | ||
+ | [ +0,000000] efi: mem191: type=0, attr=0xf, range=[0x00000000bf63f000-0x00000000bf640000) (0MB) | ||
+ | [ +0,000000] efi: mem192: type=0, attr=0xf, range=[0x00000000bf640000-0x00000000bf64b000) (0MB) | ||
+ | [ +0,000000] efi: mem193: type=0, attr=0xf, range=[0x00000000bf64b000-0x00000000bf6bf000) (0MB) | ||
+ | [ +0,000000] efi: mem194: type=10, attr=0xf, range=[0x00000000bf6bf000-0x00000000bf7aa000) (0MB) | ||
+ | [ +0,000000] efi: mem195: type=10, attr=0xf, range=[0x00000000bf7aa000-0x00000000bf7bf000) (0MB) | ||
+ | [ +0,000000] efi: mem196: type=9, attr=0xf, range=[0x00000000bf7bf000-0x00000000bf7d3000) (0MB) | ||
+ | [ +0,000000] efi: mem197: type=9, attr=0xf, range=[0x00000000bf7d3000-0x00000000bf7f0000) (0MB) | ||
+ | [ +0,000000] efi: mem198: type=4, attr=0xf, range=[0x00000000bf7f0000-0x00000000bf800000) (0MB) | ||
+ | [ +0,000000] efi: mem199: type=7, attr=0xf, range=[0x0000000100000000-0x0000000840000000) (29696MB) | ||
+ | [ +0,000000] efi: mem200: type=11, attr=0x8000000000000001, | ||
+ | [ +0,000000] efi: mem201: type=11, attr=0x8000000000000001, | ||
+ | [ +0,000000] efi: mem202: type=11, attr=0x8000000000000000, | ||
+ | [ +0,000000] efi: mem203: type=11, attr=0x8000000000000000, | ||
+ | [ +0,000000] efi: mem204: type=11, attr=0x8000000000000000, | ||
+ | [ +0,000000] SMBIOS 2.7 present. | ||
+ | [ +0,000000] DMI: Dell Inc. PowerEdge T110 II/015TH9, BIOS 2.8.0 06/24/2014 | ||
+ | [ +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved | ||
+ | [ +0,000000] e820: remove [mem 0x000a0000-0x000fffff] usable | ||
+ | [ +0,000000] e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000 | ||
+ | [ +0,000000] MTRR default type: uncachable | ||
+ | [ +0,000000] MTRR fixed ranges enabled: | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0,000000] MTRR variable ranges enabled: | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0,000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC | ||
+ | [ +0,000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 | ||
+ | [ +0,000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffffffffff2401b0] | ||
+ | [ +0,000000] Base memory trampoline at [ffff8ba780097000] 97000 size 24576 | ||
+ | [ +0,000000] BRK [0x140273000, | ||
+ | [ +0,000000] BRK [0x140274000, | ||
+ | [ +0,000000] BRK [0x140275000, | ||
+ | [ +0,000000] BRK [0x140276000, | ||
+ | [ +0,000000] BRK [0x140277000, | ||
+ | [ +0,000000] BRK [0x140278000, | ||
+ | [ +0,000000] BRK [0x140279000, | ||
+ | [ +0,000000] BRK [0x14027a000, | ||
+ | [ +0,000000] BRK [0x14027b000, | ||
+ | [ +0,000000] BRK [0x14027c000, | ||
+ | [ +0,000000] BRK [0x14027d000, | ||
+ | [ +0,000000] BRK [0x14027e000, | ||
+ | [ +0,000000] RAMDISK: [mem 0x3ebca000-0x3fffdfff] | ||
+ | [ +0,000000] Early table checksum verification disabled | ||
+ | [ +0,000000] ACPI: RSDP 00000000bf7ef014 00024 (v02 DELL ) | ||
+ | [ +0,000000] ACPI: XSDT 00000000bf7ef170 000AC (v01 DELL | ||
+ | [ +0,000000] ACPI: FACP 00000000bf7eb000 000F4 (v04 DELL | ||
+ | [ +0,000000] ACPI: DSDT 00000000bf7e1000 068FE (v01 DELL | ||
+ | [ +0,000000] ACPI: FACS 00000000bf7b8000 00040 | ||
+ | [ +0,000000] ACPI: SPMI 00000000bf7ee000 00040 (v05 DELL | ||
+ | [ +0,000000] ACPI: DMAR 00000000bf7ed000 00078 (v01 DELL | ||
+ | [ +0,000000] ACPI: ASF! 00000000bf7ec000 000A5 (v32 DELL | ||
+ | [ +0,000000] ACPI: HPET 00000000bf7ea000 00038 (v01 DELL | ||
+ | [ +0,000000] ACPI: APIC 00000000bf7e9000 00092 (v02 DELL | ||
+ | [ +0,000000] ACPI: MCFG 00000000bf7e8000 0003C (v01 DELL | ||
+ | [ +0,000000] ACPI: SLIC 00000000bf7e0000 00176 (v01 DELL | ||
+ | [ +0,000000] ACPI: BOOT 00000000bf7dd000 00028 (v01 DELL | ||
+ | [ +0,000000] ACPI: SSDT 00000000bf7dc000 002F6 (v01 DELL | ||
+ | [ +0,000000] ACPI: ASPT 00000000bf7d9000 00034 (v07 DELL | ||
+ | [ +0,000000] ACPI: SSDT 00000000bf7d8000 009AA (v01 DELL | ||
+ | [ +0,000000] ACPI: SSDT 00000000bf7d7000 00A92 (v01 DELL | ||
+ | [ +0,000000] ACPI: HEST 00000000bf7d6000 000A8 (v01 DELL | ||
+ | [ +0,000000] ACPI: ERST 00000000bf7d5000 00230 (v01 DELL | ||
+ | [ +0,000000] ACPI: BERT 00000000bf7d4000 00030 (v01 DELL | ||
+ | [ +0,000000] ACPI: EINJ 00000000bf7d3000 00130 (v01 DELL | ||
+ | [ +0,000000] ACPI: Local APIC address 0xfee00000 | ||
+ | [ +0,000000] No NUMA configuration found | ||
+ | [ +0,000000] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] | ||
+ | [ +0,000000] NODE_DATA(0) allocated [mem 0x83ffbc000-0x83ffe2fff] | ||
+ | [ +0,000000] Zone ranges: | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0,000000] Movable zone start for each node | ||
+ | [ +0,000000] Early memory node ranges | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0,000000] Initmem setup node 0 [mem 0x00001000-0x83fffffff] | ||
+ | [ +0,000000] On node 0 totalpages: 8380506 | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0, | ||
+ | [ +0,000000] ACPI: PM-Timer IO Port: 0x408 | ||
+ | [ +0,000000] ACPI: Local APIC address 0xfee00000 | ||
+ | [ +0,000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) | ||
+ | [ +0,000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) | ||
+ | [ +0,000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) | ||
+ | [ +0,000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) | ||
+ | [ +0,000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) | ||
+ | [ +0,000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) | ||
+ | [ +0,000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) | ||
+ | [ +0,000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) | ||
+ | [ +0,000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) | ||
+ | [ +0,000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) | ||
+ | [ +0,000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 | ||
+ | [ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | ||
+ | [ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | ||
+ | [ +0,000000] ACPI: IRQ0 used by override. | ||
+ | [ +0,000000] ACPI: IRQ9 used by override. | ||
+ | [ +0,000000] Using ACPI (MADT) for SMP configuration information | ||
+ | [ +0,000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 | ||
+ | [ +0,000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xba9e2000-0xba9e2fff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xba9ea000-0xba9eafff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xba9eb000-0xba9ebfff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbaa06000-0xbaa06fff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbaa43000-0xbaa43fff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbaa4c000-0xbaa4cfff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbaa58000-0xbaa59fff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbaa87000-0xbaa89fff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbb3a9000-0xbb3b7fff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbdfb0000-0xbf3affff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbf4bf000-0xbf6befff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbf6bf000-0xbf7befff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbf7bf000-0xbf7effff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xbf800000-0xe00f7fff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xfed20000-0xffbfffff] | ||
+ | [ +0,000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] | ||
+ | [ +0,000000] e820: [mem 0xbf800000-0xe00f7fff] available for PCI devices | ||
+ | [ +0,000000] Booting paravirtualized kernel on bare hardware | ||
+ | [ +0,000000] setup_percpu: | ||
+ | [ +0,000000] percpu: Embedded 38 pages/cpu s118784 r8192 d28672 u262144 | ||
+ | [ +0,000000] pcpu-alloc: s118784 r8192 d28672 u262144 alloc=1*2097152 | ||
+ | [ +0,000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 | ||
+ | [ +0,000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8248445 | ||
+ | [ +0,000000] Policy zone: Normal | ||
+ | [ +0,000000] Kernel command line: BOOT_IMAGE=/ | ||
+ | [ +0,000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | ||
+ | [ +0,000000] x86/fpu: xstate_offset[2]: | ||
+ | [ +0,000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form | ||
+ | [ +0,000000] Memory: 5042908k/ | ||
+ | [ +0,000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, | ||
+ | [ +0,000000] x86/pti: Unmapping kernel while in userspace | ||
+ | [ +0,000000] Hierarchical RCU implementation. | ||
+ | [ +0, | ||
+ | [ +0,000000] NR_IRQS: | ||
+ | [ +0,000000] Console: colour dummy device 80x25 | ||
+ | [ +0,000000] console [tty0] enabled | ||
+ | [ +0,000000] allocated 134217728 bytes of page_cgroup | ||
+ | [ +0,000000] please try ' | ||
+ | [ +0,000000] hpet clockevent registered | ||
+ | [ +0,000000] tsc: Fast TSC calibration using PIT | ||
+ | [ +0,000000] tsc: Detected 3092.937 MHz processor | ||
+ | [ +0,000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.87 BogoMIPS (lpj=3092937) | ||
+ | [ +0,000002] pid_max: default: 32768 minimum: 301 | ||
+ | [ +0,020092] Security Framework initialized | ||
+ | [ +0,000008] SELinux: | ||
+ | [ +0,000008] SELinux: | ||
+ | [ +0,000001] Yama: becoming mindful. | ||
+ | [ +0,002033] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) | ||
+ | [ +0,005336] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) | ||
+ | [ +0,002207] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) | ||
+ | [ +0,000033] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) | ||
+ | [ +0,000263] Initializing cgroup subsys memory | ||
+ | [ +0,000005] Initializing cgroup subsys devices | ||
+ | [ +0,000001] Initializing cgroup subsys freezer | ||
+ | [ +0,000001] Initializing cgroup subsys net_cls | ||
+ | [ +0,000001] Initializing cgroup subsys blkio | ||
+ | [ +0,000001] Initializing cgroup subsys perf_event | ||
+ | [ +0,000002] Initializing cgroup subsys hugetlb | ||
+ | [ +0,000001] Initializing cgroup subsys pids | ||
+ | [ +0,000001] Initializing cgroup subsys net_prio | ||
+ | [ +0,000025] ENERGY_PERF_BIAS: | ||
+ | [ +0,000001] ENERGY_PERF_BIAS: | ||
+ | [ +0,000007] CPU0: Thermal monitoring handled by SMI | ||
+ | [ +0,000013] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 | ||
+ | [ +0,000001] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 | ||
+ | [ +0,000001] tlb_flushall_shift: | ||
+ | [ +0,000025] FEATURE SPEC_CTRL Present | ||
+ | [ +0,000001] FEATURE IBPB_SUPPORT Present | ||
+ | [ +0,000001] Spectre V1 : Mitigation: Load fences, usercopy/ | ||
+ | [ +0,000002] Spectre V2 : Enabling Indirect Branch Prediction Barrier | ||
+ | [ +0,000098] Spectre V2 : Mitigation: Full retpoline | ||
+ | [ +0,000012] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp | ||
+ | [ +0,000018] MDS: Mitigation: Clear CPU buffers | ||
+ | [ +0,000154] Freeing SMP alternatives: | ||
+ | [ +0,002336] ACPI: Core revision 20130517 | ||
+ | [ +0,003369] ACPI: All ACPI Tables successfully acquired | ||
+ | [ +0,805968] ftrace: allocating 29618 entries in 116 pages | ||
+ | [ +0,021060] DMAR: Host address width 36 | ||
+ | [ +0,000002] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 | ||
+ | [ +0,000005] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da | ||
+ | [ +0,000002] DMAR: RMRR base: 0x00000000000000 end: 0x00000000000fff | ||
+ | [ +0,000002] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed90000 IOMMU 0 | ||
+ | [ +0,000001] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 | ||
+ | [ +0,000002] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. | ||
+ | [ +0,000146] DMAR-IR: Enabled IRQ remapping in x2apic mode | ||
+ | [ +0,000001] Enabling x2apic | ||
+ | [ +0,000001] Enabled x2apic | ||
+ | [ +0,000006] Switched APIC routing to cluster x2apic. | ||
+ | [ +0,000440] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | ||
+ | [ +0,010002] smpboot: CPU0: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (fam: 06, model: 2a, stepping: 07) | ||
+ | [ +0,000007] TSC deadline timer enabled | ||
+ | [ +0,000041] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. | ||
+ | [ +0,000009] ... version: | ||
+ | [ +0,000002] ... bit width: | ||
+ | [ +0,000001] ... generic registers: | ||
+ | [ +0,000001] ... value mask: | ||
+ | [ +0,000001] ... max period: | ||
+ | [ +0,000001] ... fixed-purpose events: | ||
+ | [ +0,000001] ... event mask: | ||
+ | [ +0,002107] CPU1: Thermal monitoring handled by SMI | ||
+ | [ +0,002206] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. | ||
+ | [ +0,001024] CPU2: Thermal monitoring handled by SMI | ||
+ | [ +0,003154] CPU3: Thermal monitoring handled by SMI | ||
+ | [ -0,007437] smpboot: Booting Node 0, Processors | ||
+ | [ +0,009573] Brought up 4 CPUs | ||
+ | [ +0,000003] smpboot: Max logical packages: 2 | ||
+ | [ +0,000001] smpboot: Total of 4 processors activated (24743.49 BogoMIPS) | ||
+ | [ +0,129608] node 0 initialised, | ||
+ | [ +0,000143] devtmpfs: initialized | ||
+ | [ +0,000066] x86/mm: Memory block size: 128MB | ||
+ | [ +0,004396] EVM: security.selinux | ||
+ | [ +0,000001] EVM: security.ima | ||
+ | [ +0,000002] EVM: security.capability | ||
+ | [ +0,000064] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff] (1048576 bytes) | ||
+ | [ +0,001087] atomic64 test passed for x86-64 platform with CX8 and with SSE | ||
+ | [ +0,000003] pinctrl core: initialized pinctrl subsystem | ||
+ | [ +0,000039] RTC time: 16:17:58, date: 05/24/20 | ||
+ | [ +0,000066] NET: Registered protocol family 16 | ||
+ | [ +0,000192] ACPI FADT declares the system doesn' | ||
+ | [ +0,000002] ACPI: bus type PCI registered | ||
+ | [ +0,000002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | ||
+ | [ +0,000060] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) | ||
+ | [ +0,000002] PCI: not using MMCONFIG | ||
+ | [ +0,000002] PCI: Using configuration type 1 for base access | ||
+ | [ +0,000158] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. | ||
+ | [ +0,000008] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off | ||
+ | [ +0,007735] ACPI: Added _OSI(Module Device) | ||
+ | [ +0,000002] ACPI: Added _OSI(Processor Device) | ||
+ | [ +0,000001] ACPI: Added _OSI(3.0 _SCP Extensions) | ||
+ | [ +0,000001] ACPI: Added _OSI(Processor Aggregator Device) | ||
+ | [ +0,000002] ACPI: Added _OSI(Linux-Dell-Video) | ||
+ | [ +0,000882] ACPI: EC: Look up EC in DSDT | ||
+ | [ +0,000866] ACPI: Executed 1 blocks of module-level executable AML code | ||
+ | [ +0,002079] ACPI: Dynamic OEM Table Load: | ||
+ | [ +0,000009] ACPI: SSDT ffff8baf9f09a000 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20080729) | ||
+ | [ +0,000397] ACPI: Dynamic OEM Table Load: | ||
+ | [ +0,000006] ACPI: SSDT ffff8baf9f0a9000 00303 (v01 PmRef ApIst 00003000 INTL 20080729) | ||
+ | [ +0,000301] ACPI: Dynamic OEM Table Load: | ||
+ | [ +0,000005] ACPI: SSDT ffff8baf9f0cc000 00119 (v01 PmRef ApCst 00003000 INTL 20080729) | ||
+ | [ +0,000605] ACPI: Interpreter enabled | ||
+ | [ +0,000014] ACPI: (supports S0 S4 S5) | ||
+ | [ +0,000001] ACPI: Using IOAPIC for interrupt routing | ||
+ | [ +0,000014] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) | ||
+ | [ +0,000216] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources | ||
+ | [ +0,000040] HEST: Table parsing has been initialized. | ||
+ | [ +0,000003] PCI: Using host bridge windows from ACPI; if necessary, use " | ||
+ | [ +0,000049] ACPI: Enabled 9 GPEs in block 00 to 3F | ||
+ | [ +0,003321] ACPI: Power Resource [FN00] (off) | ||
+ | [ +0,000064] ACPI: Power Resource [FN01] (off) | ||
+ | [ +0,000061] ACPI: Power Resource [FN02] (off) | ||
+ | [ +0,000062] ACPI: Power Resource [FN03] (off) | ||
+ | [ +0,000061] ACPI: Power Resource [FN04] (off) | ||
+ | [ +0,000443] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) | ||
+ | [ +0,000004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] | ||
+ | [ +0,000425] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability] | ||
+ | [ +0,000002] acpi PNP0A08:00: FADT indicates ASPM is unsupported, | ||
+ | [ +0,000354] PCI host bridge to bus 0000:00 | ||
+ | [ +0,000003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] | ||
+ | [ +0,000002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] | ||
+ | [ +0,000002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] | ||
+ | [ +0,000002] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] | ||
+ | [ +0,000002] pci_bus 0000:00: root bus resource [bus 00-fe] | ||
+ | [ +0,000007] pci 0000: | ||
+ | [ +0,000075] pci 0000: | ||
+ | [ +0,000032] pci 0000: | ||
+ | [ +0,000032] pci 0000: | ||
+ | [ +0,000064] pci 0000: | ||
+ | [ +0,000303] pci 0000: | ||
+ | [ +0,001751] pci 0000: | ||
+ | [ +0,000051] pci 0000: | ||
+ | [ +0,000043] pci 0000: | ||
+ | [ +0,000141] pci 0000: | ||
+ | [ +0,000059] pci 0000: | ||
+ | [ +0,000041] pci 0000: | ||
+ | [ +0,000081] pci 0000: | ||
+ | [ +0,000044] pci 0000: | ||
+ | [ +0,000042] pci 0000: | ||
+ | [ +0,000295] pci 0000: | ||
+ | [ +0,001755] pci 0000: | ||
+ | [ +0,000050] pci 0000: | ||
+ | [ +0,000034] pci 0000: | ||
+ | [ +0,000080] pci 0000: | ||
+ | [ +0,000036] pci 0000: | ||
+ | [ +0,000157] pci 0000: | ||
+ | [ +0,000015] pci 0000: | ||
+ | [ +0,000008] pci 0000: | ||
+ | [ +0,000008] pci 0000: | ||
+ | [ +0,000008] pci 0000: | ||
+ | [ +0,000008] pci 0000: | ||
+ | [ +0,000008] pci 0000: | ||
+ | [ +0,000039] pci 0000: | ||
+ | [ +0,000066] pci 0000: | ||
+ | [ +0,000016] pci 0000: | ||
+ | [ +0,000020] pci 0000: | ||
+ | [ +0,000104] pci 0000: | ||
+ | [ +0,000010] pci 0000: | ||
+ | [ +0,000009] pci 0000: | ||
+ | [ +0,000008] pci 0000: | ||
+ | [ +0,000010] pci 0000: | ||
+ | [ +0,000033] pci 0000: | ||
+ | [ +0,000015] pci 0000: | ||
+ | [ +0,000009] pci 0000: | ||
+ | [ +0,001090] pci 0000: | ||
+ | [ +0,000005] pci 0000: | ||
+ | [ +0,000005] pci 0000: | ||
+ | [ +0,000082] pci 0000: | ||
+ | [ +0,000086] pci 0000: | ||
+ | [ +0,000038] pci 0000: | ||
+ | [ +0,000170] pci 0000: | ||
+ | [ +0,000059] pci 0000: | ||
+ | [ +0,000010] pci 0000: | ||
+ | [ +0,001559] pci 0000: | ||
+ | [ +0,000011] pci 0000: | ||
+ | [ +0,000065] pci 0000: | ||
+ | [ +0,000016] pci 0000: | ||
+ | [ +0,000010] pci 0000: | ||
+ | [ +0,000010] pci 0000: | ||
+ | [ +0,000032] pci 0000: | ||
+ | [ +0,000091] pci 0000: | ||
+ | [ +0,000006] pci 0000: | ||
+ | [ +0,000005] pci 0000: | ||
+ | [ +0,000002] pci 0000: | ||
+ | [ +0,000002] pci 0000: | ||
+ | [ +0,000002] pci 0000: | ||
+ | [ +0,000002] pci 0000: | ||
+ | [ +0,000639] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15) | ||
+ | [ +0,000042] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) | ||
+ | [ +0,000041] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. | ||
+ | [ +0,000045] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 *6 10 11 12 14 15) | ||
+ | [ +0,000040] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 *14 15) | ||
+ | [ +0,000040] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 *6 10 11 12 14 15) | ||
+ | [ +0,000040] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. | ||
+ | [ +0,000040] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 *15) | ||
+ | [ +0,000236] vgaarb: device added: PCI: | ||
+ | [ +0,000001] vgaarb: loaded | ||
+ | [ +0,000001] vgaarb: bridge control possible 0000: | ||
+ | [ +0,000062] SCSI subsystem initialized | ||
+ | [ +0,000025] ACPI: bus type USB registered | ||
+ | [ +0,000015] usbcore: registered new interface driver usbfs | ||
+ | [ +0,000008] usbcore: registered new interface driver hub | ||
+ | [ +0,000015] usbcore: registered new device driver usb | ||
+ | [ +0,000058] EDAC MC: Ver: 3.0.0 | ||
+ | [ +0,000084] Registered efivars operations | ||
+ | [ +0,000055] PCI: Using ACPI for IRQ routing | ||
+ | [ +0,006038] PCI: pci_cache_line_size set to 64 bytes | ||
+ | [ +0,000034] e820: reserve RAM buffer [mem 0xba9e2018-0xbbffffff] | ||
+ | [ +0,000002] e820: reserve RAM buffer [mem 0xba9eb018-0xbbffffff] | ||
+ | [ +0,000002] e820: reserve RAM buffer [mem 0xbaa43018-0xbbffffff] | ||
+ | [ +0,000001] e820: reserve RAM buffer [mem 0xbaa58000-0xbbffffff] | ||
+ | [ +0,000002] e820: reserve RAM buffer [mem 0xbaa87000-0xbbffffff] | ||
+ | [ +0,000001] e820: reserve RAM buffer [mem 0xbb3a9000-0xbbffffff] | ||
+ | [ +0,000001] e820: reserve RAM buffer [mem 0xbdfb0000-0xbfffffff] | ||
+ | [ +0,000002] e820: reserve RAM buffer [mem 0xbf4bf000-0xbfffffff] | ||
+ | [ +0,000002] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] | ||
+ | [ +0,000102] NetLabel: Initializing | ||
+ | [ +0,000002] NetLabel: | ||
+ | [ +0,000000] NetLabel: | ||
+ | [ +0,000014] NetLabel: | ||
+ | [ +0,000058] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 | ||
+ | [ +0,000005] hpet0: 8 comparators, | ||
+ | [ +0,002014] amd_nb: Cannot enumerate AMD northbridges | ||
+ | [ +0,000012] Switched to clocksource hpet | ||
+ | [ +0,004075] pnp: PnP ACPI init | ||
+ | [ +0,000012] ACPI: bus type PNP registered | ||
+ | [ +0,000105] system 00:00: [io 0x0680-0x069f] has been reserved | ||
+ | [ +0,000003] system 00:00: [io 0x1000-0x100f] has been reserved | ||
+ | [ +0,000002] system 00:00: [io 0x1010-0x1013] has been reserved | ||
+ | [ +0,000002] system 00:00: [io 0xffff] has been reserved | ||
+ | [ +0,000002] system 00:00: [io 0x0400-0x0453] could not be reserved | ||
+ | [ +0,000002] system 00:00: [io 0x0458-0x047f] has been reserved | ||
+ | [ +0,000001] system 00:00: [io 0x0500-0x057f] has been reserved | ||
+ | [ +0,000002] system 00:00: [io 0x164e-0x164f] has been reserved | ||
+ | [ +0,000003] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) | ||
+ | [ +0,000031] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) | ||
+ | [ +0,000032] system 00:02: [io 0x0454-0x0457] has been reserved | ||
+ | [ +0,000003] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) | ||
+ | [ +0,000218] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) | ||
+ | [ +0,000114] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) | ||
+ | [ +0,000031] system 00:05: [mem 0xfed90000-0xfed91fff] could not be reserved | ||
+ | [ +0,000003] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) | ||
+ | [ +0,000117] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved | ||
+ | [ +0,000003] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved | ||
+ | [ +0,000001] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved | ||
+ | [ +0,000003] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved | ||
+ | [ +0,000002] system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved | ||
+ | [ +0,000002] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved | ||
+ | [ +0,000002] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved | ||
+ | [ +0,000002] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved | ||
+ | [ +0,000002] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved | ||
+ | [ +0,000002] system 00:06: [mem 0xc1400000-0xc1400fff] has been reserved | ||
+ | [ +0,000003] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) | ||
+ | [ +0,000130] pnp: PnP ACPI: found 7 devices | ||
+ | [ +0,000001] ACPI: bus type PNP unregistered | ||
+ | [ +0,006244] pci 0000: | ||
+ | [ +0,000004] pci 0000: | ||
+ | [ +0,000008] pci 0000: | ||
+ | [ +0,000002] pci 0000: | ||
+ | [ +0,000002] pci 0000: | ||
+ | [ +0,000003] pci 0000: | ||
+ | [ +0,000003] pci 0000: | ||
+ | [ +0,000004] pci 0000: | ||
+ | [ +0,000018] pci 0000: | ||
+ | [ +0,000005] pci 0000: | ||
+ | [ +0,000009] pci 0000: | ||
+ | [ +0,000002] pci 0000: | ||
+ | [ +0,000005] pci 0000: | ||
+ | [ +0,000005] pci 0000: | ||
+ | [ +0,000006] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] | ||
+ | [ +0,000002] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] | ||
+ | [ +0,000002] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] | ||
+ | [ +0,000002] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff window] | ||
+ | [ +0,000002] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] | ||
+ | [ +0,000001] pci_bus 0000:01: resource 1 [mem 0xc1200000-0xc12fffff] | ||
+ | [ +0,000002] pci_bus 0000:03: resource 1 [mem 0xc1100000-0xc11fffff] | ||
+ | [ +0,000002] pci_bus 0000:04: resource 1 [mem 0xc0800000-0xc10fffff] | ||
+ | [ +0,000002] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc07fffff 64bit pref] | ||
+ | [ +0,000002] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] | ||
+ | [ +0,000001] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] | ||
+ | [ +0,000002] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] | ||
+ | [ +0,000002] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff window] | ||
+ | [ +0,000023] NET: Registered protocol family 2 | ||
+ | [ +0,000248] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) | ||
+ | [ +0,000345] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) | ||
+ | [ +0,000113] TCP: Hash tables configured (established 262144 bind 65536) | ||
+ | [ +0,000016] TCP: reno registered | ||
+ | [ +0,000041] UDP hash table entries: 16384 (order: 7, 524288 bytes) | ||
+ | [ +0,000091] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) | ||
+ | [ +0,000097] NET: Registered protocol family 1 | ||
+ | [ +0,021893] pci 0000: | ||
+ | [ +0,000003] PCI: CLS 64 bytes, default 64 | ||
+ | [ +0,000034] Unpacking initramfs... | ||
+ | [ +0,238805] Freeing initrd memory: 20688k freed | ||
+ | [ +0,002179] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) | ||
+ | [ +0,000004] software IO TLB [mem 0xb6777000-0xba777000] (64MB) mapped at [ffff8ba836777000-ffff8ba83a776fff] | ||
+ | [ +0,000072] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer | ||
+ | [ +0,000002] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules | ||
+ | [ +0,000001] RAPL PMU: hw unit of domain package 2^-16 Joules | ||
+ | [ +0,000001] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules | ||
+ | [ +0,000053] Simple Boot Flag at 0x44 set to 0x1 | ||
+ | [ +0,000436] sha1_ssse3: Using AVX optimized SHA-1 implementation | ||
+ | [ +0,000041] sha256_ssse3: | ||
+ | [ +0,000286] futex hash table entries: 2048 (order: 5, 131072 bytes) | ||
+ | [ +0,000021] Initialise system trusted keyring | ||
+ | [ +0,000018] audit: initializing netlink socket (disabled) | ||
+ | [ +0,000012] type=2000 audit(1590337077.508: | ||
+ | [ +0,021300] HugeTLB registered 2 MB page size, pre-allocated 0 pages | ||
+ | [ +0,001227] zpool: loaded | ||
+ | [ +0,000002] zbud: loaded | ||
+ | [ +0,000251] VFS: Disk quotas dquot_6.5.2 | ||
+ | [ +0,000027] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | ||
+ | [ +0,000223] Key type big_key registered | ||
+ | [ +0,000002] SELinux: | ||
+ | [ +0,000541] NET: Registered protocol family 38 | ||
+ | [ +0,000004] Key type asymmetric registered | ||
+ | [ +0,000003] Asymmetric key parser ' | ||
+ | [ +0,000026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) | ||
+ | [ +0,000042] io scheduler noop registered | ||
+ | [ +0,000003] io scheduler deadline registered (default) | ||
+ | [ +0,000022] io scheduler cfq registered | ||
+ | [ +0,000003] io scheduler mq-deadline registered | ||
+ | [ +0,000003] io scheduler kyber registered | ||
+ | [ +0,000181] pcieport 0000: | ||
+ | [ +0,000143] pcieport 0000: | ||
+ | [ +0,000151] pcieport 0000: | ||
+ | [ +0,000079] pcieport 0000: | ||
+ | [ +0,000003] pci 0000: | ||
+ | [ +0,000002] pcie_pme 0000: | ||
+ | [ +0,000019] pcieport 0000: | ||
+ | [ +0,000006] pcie_pme 0000: | ||
+ | [ +0,000015] pcieport 0000: | ||
+ | [ +0,000002] pci 0000: | ||
+ | [ +0,000004] pcie_pme 0000: | ||
+ | [ +0,000014] pci_hotplug: | ||
+ | [ +0,000006] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 | ||
+ | [ +0,000011] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | ||
+ | [ +0,000075] efifb: probing for efifb | ||
+ | [ +0,000009] efifb: framebuffer at 0xc0000000, mapped to 0xffffb64f83600000, | ||
+ | [ +0,000002] efifb: mode is 640x480x32, linelength=2560, | ||
+ | [ +0,000000] efifb: scrolling: redraw | ||
+ | [ +0,000002] efifb: Truecolor: size=8: | ||
+ | [ +0,012849] Console: switching to colour frame buffer device 80x30 | ||
+ | [ +0,011091] fb0: EFI VGA frame buffer device | ||
+ | [ +0,000007] intel_idle: MWAIT substates: 0x1120 | ||
+ | [ +0,000002] intel_idle: v0.4.1 model 0x2A | ||
+ | [ +0,000017] intel_idle: lapic_timer_reliable_states 0xffffffff | ||
+ | [ +0,000077] input: Power Button as / | ||
+ | [ +0,000003] ACPI: Power Button [PWRF] | ||
+ | [ +0,000213] ACPI: Requesting acpi_cpufreq | ||
+ | [ +0,001387] thermal LNXTHERM: | ||
+ | [ +0,000002] ACPI: Thermal Zone [TZ01] (30 C) | ||
+ | [ +0,000052] ERST: Error Record Serialization Table (ERST) support is initialized. | ||
+ | [ +0,000002] pstore: Registered erst as persistent store backend | ||
+ | [ +0,000130] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. | ||
+ | [ +0,000053] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | ||
+ | [ +0,020558] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | ||
+ | [ +0,020585] 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A | ||
+ | [ +0,000324] Non-volatile memory driver v1.3 | ||
+ | [ +0,000027] Linux agpgart interface v0.103 | ||
+ | [ +0,000077] crash memory driver: version 1.1 | ||
+ | [ +0,000079] rdac: device handler registered | ||
+ | [ +0,000031] hp_sw: device handler registered | ||
+ | [ +0,000003] emc: device handler registered | ||
+ | [ +0,000024] alua: device handler registered | ||
+ | [ +0,000071] libphy: Fixed MDIO Bus: probed | ||
+ | [ +0,000038] ehci_hcd: USB 2.0 ' | ||
+ | [ +0,000007] ehci-pci: EHCI PCI platform driver | ||
+ | [ +0,000085] ehci-pci 0000: | ||
+ | [ +0,000032] ehci-pci 0000: | ||
+ | [ +0,000012] ehci-pci 0000: | ||
+ | [ +0,003898] ehci-pci 0000: | ||
+ | [ +0,000014] ehci-pci 0000: | ||
+ | [ +0,005775] ehci-pci 0000: | ||
+ | [ +0,000040] usb usb1: New USB device found, idVendor=1d6b, | ||
+ | [ +0,000002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
+ | [ +0,000002] usb usb1: Product: EHCI Host Controller | ||
+ | [ +0,000002] usb usb1: Manufacturer: | ||
+ | [ +0,000001] usb usb1: SerialNumber: | ||
+ | [ +0,000091] hub 1-0:1.0: USB hub found | ||
+ | [ +0,000006] hub 1-0:1.0: 2 ports detected | ||
+ | [ +0,000168] ehci-pci 0000: | ||
+ | [ +0,000035] ehci-pci 0000: | ||
+ | [ +0,000011] ehci-pci 0000: | ||
+ | [ +0,003892] ehci-pci 0000: | ||
+ | [ +0,000013] ehci-pci 0000: | ||
+ | [ +0,005739] ehci-pci 0000: | ||
+ | [ +0,000031] usb usb2: New USB device found, idVendor=1d6b, | ||
+ | [ +0,000002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
+ | [ +0,000002] usb usb2: Product: EHCI Host Controller | ||
+ | [ +0,000001] usb usb2: Manufacturer: | ||
+ | [ +0,000002] usb usb2: SerialNumber: | ||
+ | [ +0,000079] hub 2-0:1.0: USB hub found | ||
+ | [ +0,000005] hub 2-0:1.0: 2 ports detected | ||
+ | [ +0,000080] ohci_hcd: USB 1.1 ' | ||
+ | [ +0,000005] ohci-pci: OHCI PCI platform driver | ||
+ | [ +0,000009] uhci_hcd: USB Universal Host Controller Interface driver | ||
+ | [ +0,000042] usbcore: registered new interface driver usbserial_generic | ||
+ | [ +0,000005] usbserial: USB Serial support registered for generic | ||
+ | [ +0,000037] i8042: PNP: No PS/2 controller found. Probing ports directly. | ||
+ | [ +1,045450] i8042: No controller found | ||
+ | [ +0,000261] mousedev: PS/2 mouse device common for all mice | ||
+ | [ +0,000011] tsc: Refined TSC clocksource calibration: | ||
+ | [ +0,000012] Switched to clocksource tsc | ||
+ | [ +0,000071] rtc_cmos 00:01: RTC can wake from S4 | ||
+ | [ +0,000112] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 | ||
+ | [ +0,000027] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs | ||
+ | [ +0,000046] intel_pstate: | ||
+ | [ +0,000222] cpuidle: using governor menu | ||
+ | [ +0,000427] EFI Variables Facility v0.08 2004-May-17 | ||
+ | [ +0,197629] hidraw: raw HID events driver (C) Jiri Kosina | ||
+ | [ +0,000103] usbcore: registered new interface driver usbhid | ||
+ | [ +0,000001] usbhid: USB HID core driver | ||
+ | [ +0,000052] drop_monitor: | ||
+ | [ +0,000052] TCP: cubic registered | ||
+ | [ +0,000003] Initializing XFRM netlink socket | ||
+ | [ +0,000091] NET: Registered protocol family 10 | ||
+ | [ +0,000176] NET: Registered protocol family 17 | ||
+ | [ +0,000006] mpls_gso: MPLS GSO support | ||
+ | [ +0,000176] mce: Using 9 MCE banks | ||
+ | [ +0,000053] microcode: sig=0x206a7, | ||
+ | [ +0,000099] microcode: Microcode Update Driver: v2.01 < | ||
+ | [ +0,000193] PM: Hibernation image not present or could not be loaded. | ||
+ | [ +0,000002] Loading compiled-in X.509 certificates | ||
+ | [ +0,000027] Loaded X.509 cert ' | ||
+ | [ +0,000011] Loaded X.509 cert ' | ||
+ | [ +0,000424] Loaded X.509 cert ' | ||
+ | [ +0,000017] registered taskstats version 1 | ||
+ | [ +0,002378] Key type trusted registered | ||
+ | [ +0,002316] Key type encrypted registered | ||
+ | [ +0,000029] IMA: No TPM chip found, activating TPM-bypass! (rc=-19) | ||
+ | [ +0, | ||
+ | [ +0,000011] tty tty21: hash matches | ||
+ | [ +0,000031] memory memory150: hash matches | ||
+ | [ +0,000052] rtc_cmos 00:01: setting system clock to 2020-05-24 16:17:59 UTC (1590337079) | ||
+ | [ +0,000799] Freeing unused kernel memory: 1980k freed | ||
+ | [ +0,000187] Write protecting the kernel read-only data: 12288k | ||
+ | [ +0,000943] Freeing unused kernel memory: 396k freed | ||
+ | [ +0,001045] Freeing unused kernel memory: 540k freed | ||
+ | [ +0,004054] usb 1-1: new high-speed USB device number 2 using ehci-pci | ||
+ | [ +0,000995] usb 2-1: new high-speed USB device number 2 using ehci-pci | ||
+ | [ +0,123413] usb 1-1: New USB device found, idVendor=8087, | ||
+ | [ +0,000003] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | ||
+ | [ +0,000275] hub 1-1:1.0: USB hub found | ||
+ | [ +0,000094] hub 1-1:1.0: 6 ports detected | ||
+ | [ +0,001620] usb 2-1: New USB device found, idVendor=8087, | ||
+ | [ +0,000003] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | ||
+ | [ +0,000264] hub 2-1:1.0: USB hub found | ||
+ | [ +0,000106] hub 2-1:1.0: 6 ports detected | ||
+ | [ +0,252147] random: systemd: uninitialized urandom read (16 bytes read) | ||
+ | [ +0,000275] random: systemd: uninitialized urandom read (16 bytes read) | ||
+ | [ +0,000013] random: systemd: uninitialized urandom read (16 bytes read) | ||
+ | [ +0,000632] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) | ||
+ | [ +0,000131] systemd[1]: Detected architecture x86-64. | ||
+ | [ +0,000003] systemd[1]: Running in initial RAM disk. | ||
+ | [ +0,000028] systemd[1]: Set hostname to < | ||
+ | [ +0,034485] random: systemd: uninitialized urandom read (16 bytes read) | ||
+ | [ +0,000020] random: systemd: uninitialized urandom read (16 bytes read) | ||
+ | [ +0,000027] random: systemd: uninitialized urandom read (16 bytes read) | ||
+ | [ +0,000046] random: systemd: uninitialized urandom read (16 bytes read) | ||
+ | [ +0,000579] random: systemd: uninitialized urandom read (16 bytes read) | ||
+ | [ +0,000106] random: systemd: uninitialized urandom read (16 bytes read) | ||
+ | [ +0,000298] random: systemd: uninitialized urandom read (16 bytes read) | ||
+ | [ +0,003874] systemd[1]: Created slice Root Slice. | ||
+ | [ +0,000089] systemd[1]: Created slice System Slice. | ||
+ | [ +0,000037] systemd[1]: Listening on udev Kernel Socket. | ||
+ | [ +0,000012] systemd[1]: Reached target Local File Systems. | ||
+ | [ +0,000055] systemd[1]: Listening on Journal Socket. | ||
+ | [ +0,000439] systemd[1]: Starting Create list of required static device nodes for the current kernel... | ||
+ | [ +0,000471] systemd[1]: Starting Apply Kernel Variables... | ||
+ | [ +0,000372] systemd[1]: Starting Journal Service... | ||
+ | [ +0,000384] systemd[1]: Starting Setup Virtual Console... | ||
+ | [ +0,000019] systemd[1]: Reached target Slices. | ||
+ | [ +0,000015] systemd[1]: Reached target Swap. | ||
+ | [ +0,000050] systemd[1]: Listening on udev Control Socket. | ||
+ | [ +0,000011] systemd[1]: Reached target Sockets. | ||
+ | [ +0,000015] systemd[1]: Reached target Timers. | ||
+ | [ +0,000479] systemd[1]: Starting dracut cmdline hook... | ||
+ | [ +0,000382] systemd[1]: Started Create list of required static device nodes for the current kernel. | ||
+ | [ +0,000907] systemd[1]: Started Apply Kernel Variables. | ||
+ | [ +0,000597] systemd[1]: Starting Create Static Device Nodes in /dev... | ||
+ | [ +0,002302] systemd[1]: Started Create Static Device Nodes in /dev. | ||
+ | [ +0,016267] systemd[1]: Started Journal Service. | ||
+ | [ +0,097535] device-mapper: | ||
+ | [ +0,000060] device-mapper: | ||
+ | [ +0,058519] pps_core: LinuxPPS API ver. 1 registered | ||
+ | [ +0,000003] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti < | ||
+ | [ +0,001556] PTP clock support registered | ||
+ | [ +0,013747] mpt2sas version 20.103.01.00 loaded | ||
+ | [ +0,000761] tg3.c: | ||
+ | [ +0,001601] mpt2sas 0000: | ||
+ | [ +0,000657] libata version 3.00 loaded. | ||
+ | [ +0,014233] tg3 0000: | ||
+ | [ +0,000004] tg3 0000: | ||
+ | [ +0,000002] tg3 0000: | ||
+ | [ +0,000002] tg3 0000: | ||
+ | [ +0,000229] ahci 0000: | ||
+ | [ +0,000134] ahci 0000: | ||
+ | [ +0,000054] mpt2sas_cm0: | ||
+ | [ +0,010579] ahci 0000: | ||
+ | [ +0,000004] ahci 0000: | ||
+ | [ +0,004042] scsi host1: ahci | ||
+ | [ +0,001125] scsi host2: ahci | ||
+ | [ +0,000077] scsi host3: ahci | ||
+ | [ +0,000070] scsi host4: ahci | ||
+ | [ +0,000075] scsi host5: ahci | ||
+ | [ +0,000071] scsi host6: ahci | ||
+ | [ +0,000045] ata1: DUMMY | ||
+ | [ +0,000001] ata2: DUMMY | ||
+ | [ +0,000001] ata3: DUMMY | ||
+ | [ +0,000001] ata4: DUMMY | ||
+ | [ +0,000004] ata5: SATA max UDMA/133 abar m2048@0xc1304000 port 0xc1304300 irq 28 | ||
+ | [ +0,000001] ata6: DUMMY | ||
+ | [ +0,004087] mpt2sas_cm0: | ||
+ | [ +0,000037] mpt2sas_cm0: | ||
+ | [ +0, | ||
+ | [ +0,000001] mpt2sas_cm0: | ||
+ | [ +0,000070] mpt2sas 0000: | ||
+ | [ +0,000140] mpt2sas_cm0: | ||
+ | [ +0,000000] mpt2sas0-msix0: | ||
+ | [ +0,000002] mpt2sas_cm0: | ||
+ | [ +0,000000] mpt2sas_cm0: | ||
+ | [ +0,000508] mpt2sas_cm0: | ||
+ | [ +0,006055] mpt2sas_cm0: | ||
+ | [ +0,000001] mpt2sas_cm0: | ||
+ | [ +0,000000] mpt2sas_cm0: | ||
+ | [ +0,004009] mpt2sas_cm0: | ||
+ | [ +0,000045] mpt2sas_cm0: | ||
+ | [ +0,000014] mpt2sas_cm0: | ||
+ | [ +0,000003] mpt2sas_cm0: | ||
+ | [ +0,000120] scsi host0: Fusion MPT SAS Host | ||
+ | [ +0,003407] mpt2sas_cm0: | ||
+ | [ +0,008988] checking generic (c0000000 12c000) vs hw (c0000000 800000) | ||
+ | [ +0,000003] fb: conflicting fb hw usage mgag200drmfb vs EFI VGA - removing generic driver | ||
+ | [ +0,000017] Console: switching to colour dummy device 80x25 | ||
+ | [ +0,004462] [TTM] Zone kernel: Available graphics memory: 16456820 kiB | ||
+ | [ +0,000003] [TTM] Zone | ||
+ | [ +0,000001] [TTM] Initializing pool allocator | ||
+ | [ +0,000004] [TTM] Initializing DMA pool allocator | ||
+ | [ +0,031955] fbcon: mgadrmfb (fb0) is primary device | ||
+ | [ +0,000043] Console: switching to colour frame buffer device 128x48 | ||
+ | [ +0,241514] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) | ||
+ | [ +0,003165] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GH70N, A101, max UDMA/100 | ||
+ | [ +0,004260] ata5.00: configured for UDMA/100 | ||
+ | [ +0,005496] scsi: waiting for bus probes to complete ... | ||
+ | [ +0,177304] mgag200 0000: | ||
+ | [ +0,003802] [drm] Initialized mgag200 1.0.0 20110418 for 0000: | ||
+ | [ +1,106306] mpt2sas_cm0: | ||
+ | [ +6,128738] mpt2sas_cm0: | ||
+ | [ +0,000319] scsi 0:1:0:0: Direct-Access | ||
+ | [ +0,000432] scsi 0:1:0:0: RAID10: handle(0x004f), | ||
+ | [ +0,000006] scsi 0:1:0:0: Set queue' | ||
+ | [ +0,000013] scsi 0:1:0:0: qdepth(128), | ||
+ | [ +0,005724] scsi 0:0:0:0: Direct-Access | ||
+ | [ +0,000201] scsi 0:0:0:0: SSP: handle(0x0009), | ||
+ | [ +0,000005] scsi 0:0:0:0: enclosure logical id (0x5782bcb06d14a900), | ||
+ | [ +0,000005] scsi 0:0:0:0: qdepth(254), | ||
+ | [ +0,015253] scsi 0:0:1:0: Direct-Access | ||
+ | [ +0,000208] scsi 0:0:1:0: SSP: handle(0x000a), | ||
+ | [ +0,000005] scsi 0:0:1:0: enclosure logical id (0x5782bcb06d14a900), | ||
+ | [ +0,000005] scsi 0:0:1:0: qdepth(254), | ||
+ | [ +0,014335] random: fast init done | ||
+ | [ +0,001470] scsi 0:0:2:0: Direct-Access | ||
+ | [ +0,000199] scsi 0:0:2:0: SSP: handle(0x000b), | ||
+ | [ +0,000005] scsi 0:0:2:0: enclosure logical id (0x5782bcb06d14a900), | ||
+ | [ +0,000005] scsi 0:0:2:0: qdepth(254), | ||
+ | [ +0,014824] scsi 0:0:3:0: Direct-Access | ||
+ | [ +0,000411] scsi 0:0:3:0: SSP: handle(0x000c), | ||
+ | [ +0,000006] scsi 0:0:3:0: enclosure logical id (0x5782bcb06d14a900), | ||
+ | [ +0,000005] scsi 0:0:3:0: qdepth(254), | ||
+ | [ +0,018563] scsi 5:0:0:0: CD-ROM | ||
+ | [ +0,032371] sd 0:1:0:0: [sda] 1169686528 512-byte logical blocks: (598 GB/557 GiB) | ||
+ | [ +0,000099] sd 0:1:0:0: [sda] Write Protect is off | ||
+ | [ +0,000004] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08 | ||
+ | [ +0,000030] sd 0:1:0:0: [sda] No Caching mode page found | ||
+ | [ +0,000003] sd 0:1:0:0: [sda] Assuming drive cache: write through | ||
+ | [ +0,015074] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray | ||
+ | [ +0,000004] cdrom: Uniform CD-ROM driver Revision: 3.20 | ||
+ | [ +0,000143] sr 5:0:0:0: Attached scsi CD-ROM sr0 | ||
+ | [ +0, | ||
+ | [ +0,000676] sd 0:1:0:0: [sda] Attached SCSI disk | ||
+ | [ +0,519481] SGI XFS with ACLs, security attributes, no debug enabled | ||
+ | [ +0,002006] XFS (dm-0): Mounting V5 Filesystem | ||
+ | [ +0,102204] XFS (dm-0): Ending clean mount | ||
+ | [ +0,292792] systemd-journald[112]: | ||
+ | [ +0,066679] random: crng init done | ||
+ | [ +0,235829] type=1404 audit(1590337089.255: | ||
+ | [ +0,061871] SELinux: 2048 avtab hash slots, 112685 rules. | ||
+ | [ +0,058385] SELinux: 2048 avtab hash slots, 112685 rules. | ||
+ | [ +0,029212] SELinux: | ||
+ | [ +0,000003] SELinux: | ||
+ | [ +0,004702] SELinux: | ||
+ | [ +0,000002] SELinux: | ||
+ | [ +0,008720] type=1403 audit(1590337089.418: | ||
+ | [ +0,004969] systemd[1]: Successfully loaded SELinux policy in 172.733ms. | ||
+ | [ +0,230284] ip_tables: (C) 2000-2006 Netfilter Core Team | ||
+ | [ +0,000131] systemd[1]: Inserted module ' | ||
+ | [ +0,028179] systemd[1]: Relabelled /dev, /run and / | ||
+ | [ +1,208643] systemd-journald[534]: | ||
+ | [ +0,478432] EDAC MC0: Giving out device to ' | ||
+ | [ +0,007026] IPMI message handler: version 39.2 | ||
+ | [ +0,003501] ipmi device interface | ||
+ | [ +0,016180] ipmi_si: IPMI System Interface driver | ||
+ | [ +0,000016] ipmi_si dmi-ipmi-si.0: | ||
+ | [ +0,000004] ipmi_platform: | ||
+ | [ +0,000001] ipmi_si: Adding SMBIOS-specified kcs state machine | ||
+ | [ +0,000015] ipmi_si IPI0001:00: probing via ACPI | ||
+ | [ +0,000039] ipmi_si IPI0001:00: [io 0x0ca8] regsize 1 spacing 4 irq 0 | ||
+ | [ +0,000002] ipmi_si dmi-ipmi-si.0: | ||
+ | [ +0,005584] ipmi_si: Adding ACPI-specified kcs state machine | ||
+ | [ +0,000053] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 | ||
+ | [ +0,011689] sd 0:1:0:0: Attached scsi generic sg0 type 0 | ||
+ | [ +0,000561] scsi 0:0:0:0: Attached scsi generic sg1 type 0 | ||
+ | [ +0,000345] scsi 0:0:1:0: Attached scsi generic sg2 type 0 | ||
+ | [ +0,000061] scsi 0:0:2:0: Attached scsi generic sg3 type 0 | ||
+ | [ +0,000179] scsi 0:0:3:0: Attached scsi generic sg4 type 0 | ||
+ | [ +0,000038] sr 5:0:0:0: Attached scsi generic sg5 type 5 | ||
+ | [ +0,005070] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20130517/ | ||
+ | [ +0,000006] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver | ||
+ | [ +0,000004] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20130517/ | ||
+ | [ +0,000003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver | ||
+ | [ +0,000001] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20130517/ | ||
+ | [ +0,000003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver | ||
+ | [ +0,000002] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20130517/ | ||
+ | [ +0,000002] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver | ||
+ | [ +0,000002] lpc_ich: Resource conflict(s) found affecting gpio_ich | ||
+ | [ +0,004747] i801_smbus 0000: | ||
+ | [ +0,005987] input: PC Speaker as / | ||
+ | [ +0,004621] cryptd: max_cpu_qlen set to 1000 | ||
+ | [ +0,010160] AVX version of gcm_enc/dec engaged. | ||
+ | [ +0,000003] AES CTR mode by8 optimization enabled | ||
+ | [ +0,012237] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) | ||
+ | [ +0,000520] alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni) | ||
+ | [ +0,007412] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) | ||
+ | [ +0,025360] ipmi_si IPI0001:00: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) | ||
+ | [ +0,000853] iTCO_vendor_support: | ||
+ | [ +0,001217] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 | ||
+ | [ +0,000036] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) | ||
+ | [ +0,000309] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) | ||
+ | [ +0,026858] intel_rapl: Found RAPL domain package | ||
+ | [ +0,000001] intel_rapl: Found RAPL domain core | ||
+ | [ +0,000002] intel_rapl: RAPL package 0 domain package locked by BIOS | ||
+ | [ +0,054460] ipmi_si IPI0001:00: IPMI kcs interface initialized | ||
+ | [ +0,002962] ipmi_ssif: IPMI SSIF Interface driver | ||
+ | [ +0,200440] Adding 16515068k swap on / | ||
+ | [ +0,185053] XFS (sda2): Mounting V5 Filesystem | ||
+ | [ +0,476908] XFS (sda2): Ending clean mount | ||
+ | [ +0,951622] XFS (dm-2): Mounting V5 Filesystem | ||
+ | [ +0,252580] XFS (dm-2): Ending clean mount | ||
+ | [ +0,200128] RPC: Registered named UNIX socket transport module. | ||
+ | [ +0,000003] RPC: Registered udp transport module. | ||
+ | [ +0,000002] RPC: Registered tcp transport module. | ||
+ | [ +0,000001] RPC: Registered tcp NFSv4.1 backchannel transport module. | ||
+ | [ +0,002113] type=1305 audit(1590337093.845: | ||
+ | [ +0,907243] ip6_tables: (C) 2000-2006 Netfilter Core Team | ||
+ | [ +0,019325] Ebtables v2.0 registered | ||
+ | [ +0,008966] Netfilter messages via NETLINK v0.30. | ||
+ | [ +0,004190] ip_set: protocol 7 | ||
+ | [ +0,111661] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) | ||
+ | [ +0,092249] bridge: filtering via arp/ | ||
+ | [ +0,001174] openvswitch: | ||
+ | [ +0,296055] IPv6: ADDRCONF(NETDEV_UP): | ||
+ | [ +0,000128] tg3 0000: | ||
+ | [ +0,035241] IPv6: ADDRCONF(NETDEV_UP): | ||
+ | [mai24 18:18] tg3 0000: | ||
+ | [ +0,000011] tg3 0000: | ||
+ | [ +0,000023] IPv6: ADDRCONF(NETDEV_CHANGE): | ||
+ | [ +0,326936] device ovs-system entered promiscuous mode | ||
+ | [ +0,008540] device br0 entered promiscuous mode | ||
+ | [ +0,308412] device em1 entered promiscuous mode | ||
+ | [ +0,116174] device lan entered promiscuous mode | ||
+ | [ +4,279923] FS-Cache: Loaded | ||
+ | [ +0,025313] FS-Cache: Netfs ' | ||
+ | [ +0,006741] Key type dns_resolver registered | ||
+ | [ +0,025208] NFS: Registering the id_resolver key type | ||
+ | [ +0,000009] Key type id_resolver registered | ||
+ | [ +0,000001] Key type id_legacy registered | ||
+ | [ +0,531152] tun: Universal TUN/TAP device driver, 1.6 | ||
+ | [ +0,000003] tun: (C) 1999-2004 Max Krasnyansky < | ||
+ | [ +0,001423] virbr0: port 1(virbr0-nic) entered blocking state | ||
+ | [ +0,000003] virbr0: port 1(virbr0-nic) entered disabled state | ||
+ | [ +0,000036] device virbr0-nic entered promiscuous mode | ||
+ | [ +0,131604] virbr0: port 1(virbr0-nic) entered blocking state | ||
+ | [ +0,000005] virbr0: port 1(virbr0-nic) entered listening state | ||
+ | [ +0,000113] IPv6: ADDRCONF(NETDEV_UP): | ||
+ | [ +0,035156] virbr0: port 1(virbr0-nic) entered disabled state | ||
+ | |||
+ | </ | ||