====== Dell PowerEdge T110 II ====== Serveur Dell T110 II achété d'occasion en novembre 2016 pour environ 200€ : * Intel Xeon E3 1220 * 32Go (4x8Go Samsung 1x 8GB DDR3-1600 ECC UDIMM PC3L-12800E Dual Rank x8 Module) * 4x Seagate ST3300657SS 300Go SAS 6Gbps 15K ===== Ports ===== Face avant: * 2 baies 5"²⁵ avec 1 lecteur/graveur DVD HL-DT-ST DVD+/-RW GH70N * 2 ports USB Face arrière: * 4 ports USB * 1 port eSata * 1 port VGA * 1 port série * 1 port RJ45 (partagé avec IPMI) ===== Cpu ===== cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Xeon(R) CPU E31220 @ 3.10GHz stepping : 7 microcode : 0x29 cpu MHz : 1640.578 cache size : 8192 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb pln pts dtherm tpr_shadow vnmi flexpriority ept vpid xsaveopt bogomips : 6185.59 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Xeon(R) CPU E31220 @ 3.10GHz stepping : 7 microcode : 0x29 cpu MHz : 1673.152 cache size : 8192 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 4 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb pln pts dtherm tpr_shadow vnmi flexpriority ept vpid xsaveopt bogomips : 6185.59 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Xeon(R) CPU E31220 @ 3.10GHz stepping : 7 microcode : 0x29 cpu MHz : 1741.933 cache size : 8192 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 4 apicid : 4 initial apicid : 4 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb pln pts dtherm tpr_shadow vnmi flexpriority ept vpid xsaveopt bogomips : 6185.59 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Xeon(R) CPU E31220 @ 3.10GHz stepping : 7 microcode : 0x29 cpu MHz : 1763.609 cache size : 8192 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 4 apicid : 6 initial apicid : 6 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb pln pts dtherm tpr_shadow vnmi flexpriority ept vpid xsaveopt bogomips : 6185.59 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: ===== Cartes PCI ===== Retour commande lscpi : 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4) 00:1f.0 ISA bridge: Intel Corporation C202 Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express 04:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a) ===== Informations DMI ===== Retour de la commande dmidecode : # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 2.7 present. 59 structures occupying 2791 bytes. Table at 0xBF6AD000. Handle 0x0033, DMI type 218, 23 bytes OEM-specific Type Header and Data: DA 17 33 00 B2 00 91 03 0E 30 80 25 03 AD 02 01 00 68 03 AD 02 00 00 Handle 0x0000, DMI type 208, 16 bytes OEM-specific Type Header and Data: D0 10 00 00 02 00 FE 00 DE 04 00 00 00 01 00 00 Handle 0x0001, DMI type 210, 12 bytes OEM-specific Type Header and Data: D2 0C 01 00 F8 03 04 03 06 80 04 05 Handle 0x0002, DMI type 216, 9 bytes OEM-specific Type Header and Data: D8 09 02 00 01 02 01 00 00 Strings: MATROX VGA/VBE BIOS, Version V3.8WO Handle 0x0003, DMI type 222, 16 bytes OEM-specific Type Header and Data: DE 10 03 00 01 10 00 00 16 11 25 07 53 01 00 01 Handle 0x0004, DMI type 225, 25 bytes OEM-specific Type Header and Data: E1 19 04 00 01 01 05 00 00 02 2C 00 00 03 2D 00 00 04 2E 00 00 05 2F 00 00 Strings: CPU.Socket.1 DIMM.Socket.A1 DIMM.Socket.A2 DIMM.Socket.A3 DIMM.Socket.A4 Handle 0x0005, DMI type 4, 42 bytes Processor Information Socket Designation: CPU1 Type: Central Processor Family: Xeon Manufacturer: Intel(R) Corporation ID: A7 06 02 00 FF FB EB BF Signature: Type 0, Family 6, Model 42, Stepping 7 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz Voltage: 1.2 V External Clock: 100 MHz Max Speed: 4000 MHz Current Speed: 3100 MHz Status: Populated, Enabled Upgrade: Socket BGA1155 L1 Cache Handle: 0x0007 L2 Cache Handle: 0x0008 L3 Cache Handle: 0x0009 Serial Number: NotSupport Asset Tag: FFFF Part Number: FFFF Core Count: 4 Core Enabled: 4 Thread Count: 4 Characteristics: 64-bit capable Multi-Core Execute Protection Enhanced Virtualization Power/Performance Control Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: Not Specified Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Through Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Parity System Type: Data Associativity: 8-way Set-associative Handle 0x0007, DMI type 7, 19 bytes Cache Information Socket Designation: Not Specified Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Through Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Parity System Type: Instruction Associativity: 8-way Set-associative Handle 0x0008, DMI type 7, 19 bytes Cache Information Socket Designation: Not Specified Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Through Location: Internal Installed Size: 1 MB Maximum Size: 1 MB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 8-way Set-associative Handle 0x0009, DMI type 7, 19 bytes Cache Information Socket Designation: Not Specified Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Write Back Location: Internal Installed Size: 8 MB Maximum Size: 8 MB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 16-way Set-associative Handle 0x000A, DMI type 0, 24 bytes BIOS Information Vendor: Dell Inc. Version: 2.8.0 Release Date: 06/24/2014 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 4096 kB Characteristics: ISA is supported PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported Japanese floppy for Toshiba 1.2 MB is supported (int 13h) 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported BIOS boot specification is supported Function key-initiated network boot is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 2.8 Handle 0x000B, DMI type 1, 27 bytes System Information Manufacturer: Dell Inc. Product Name: PowerEdge T110 II Version: Not Specified Serial Number: 123456789 UUID: 12345678-1234-5678-90ab-cddeefaabbcc Wake-up Type: Power Switch SKU Number: Not Specified Family: Not Specified Handle 0x000C, DMI type 2, 9 bytes Base Board Information Manufacturer: Dell Inc. Product Name: 015TH9 Version: A08 Serial Number: ..CN7082122H0KM8. Asset Tag: Not Specified Handle 0x000D, DMI type 3, 21 bytes Chassis Information Manufacturer: Dell Inc. Type: Main Server Chassis Lock: Present Version: Not Specified Serial Number: Chassis Serial Number Asset Tag: Chassis Asset Tag Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: Unknown OEM Information: 0x00000000 Height: 5 U Number Of Power Cords: Unspecified Contained Elements: 0 Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: VGA Internal Connector Type: None External Reference Designator: CRT External Connector Type: DB-15 female Port Type: Video Port Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM Internal Connector Type: None External Reference Designator: COM 1 External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LAN Internal Connector Type: None External Reference Designator: Network 1 External Connector Type: RJ-45 Port Type: Network Port Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_USB1 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_USB2 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_SATA1 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: SAS/SATA Plug Receptacle Port Type: SATA Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_SATA2 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: SAS/SATA Plug Receptacle Port Type: SATA Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_SATA3 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: SAS/SATA Plug Receptacle Port Type: SATA Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_SATA4 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: SAS/SATA Plug Receptacle Port Type: SATA Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_SATA5 Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: SAS/SATA Plug Receptacle Port Type: SATA Handle 0x001E, DMI type 9, 17 bytes System Slot Information Designation: PCIE1 Type: x8 PCI Express 2 x8 Current Usage: In Use Length: Long ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:01:00.0 Handle 0x001F, DMI type 9, 17 bytes System Slot Information Designation: PCIE2 Type: x8 PCI Express 2 x16 Current Usage: Available Length: Long ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:00.0 Handle 0x0020, DMI type 9, 17 bytes System Slot Information Designation: PCIE3 Type: x4 PCI Express 2 x8 Current Usage: Available Length: Long ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:00.0 Handle 0x0021, DMI type 9, 17 bytes System Slot Information Designation: PCIE4 Type: x1 PCI Express 2 x1 Current Usage: Available Length: Long ID: 4 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:00.0 Handle 0x0022, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Enabled Description: Embedded Matrox G200 Video Handle 0x0023, DMI type 10, 6 bytes On Board Device Information Type: Ethernet Status: Enabled Description: Embedded Broadcom 5722 NIC Handle 0x0024, DMI type 11, 5 bytes OEM Strings String 1: Dell System String 2: 5[0000] Handle 0x0025, DMI type 12, 5 bytes System Configuration Options Option 1: NVRAM_CLR: Clear user settable NVRAM areas and set defaults Option 2: PWRD_EN: Close to enable password Handle 0x0026, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x0027, DMI type 26, 22 bytes Voltage Probe Description: Voltage Probe Description. Location: Unknown Status: Unknown Maximum Value: Unknown Minimum Value: Unknown Resolution: Unknown Tolerance: Unknown Accuracy: Unknown OEM-specific Information: 0x00000000 Nominal Value: Unknown Handle 0x0028, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x0029, DMI type 41, 11 bytes Onboard Device Reference Designation: Embedded Video Type: Video Status: Enabled Type Instance: 1 Bus Address: 0000:04:03.0 Handle 0x002A, DMI type 41, 11 bytes Onboard Device Reference Designation: Embedded NIC 1 Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:03:00.0 Handle 0x002B, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 32 GB Error Information Handle: No Error Number Of Devices: 4 Handle 0x002C, DMI type 17, 34 bytes Memory Device Array Handle: 0x002B Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM A2 Bank Locator: BANK 0 Type: DDR3 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 1600 MT/s Manufacturer: 80CE000080CE Serial Number: 35E60509 Asset Tag: 021312 Part Number: M391B1G73BH0-YK0 Rank: 2 Configured Memory Speed: 1333 MT/s Handle 0x002D, DMI type 17, 34 bytes Memory Device Array Handle: 0x002B Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM A1 Bank Locator: BANK 1 Type: DDR3 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 1600 MT/s Manufacturer: 80CE000080CE Serial Number: 35D83B79 Asset Tag: 021311 Part Number: M391B1G73BH0-CK0 Rank: 2 Configured Memory Speed: 1333 MT/s Handle 0x002E, DMI type 17, 34 bytes Memory Device Array Handle: 0x002B Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM B2 Bank Locator: BANK 2 Type: DDR3 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 1600 MT/s Manufacturer: 80CE000080CE Serial Number: 8704CEBE Asset Tag: 021310 Part Number: M391B1G73BH0-YK0 Rank: 2 Configured Memory Speed: 1333 MT/s Handle 0x002F, DMI type 17, 34 bytes Memory Device Array Handle: 0x002B Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM B1 Bank Locator: BANK 3 Type: DDR3 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 1600 MT/s Manufacturer: 80CE000080CE Serial Number: 35DD95B7 Asset Tag: 021312 Part Number: M391B1G73BH0-YK0 Rank: 2 Configured Memory Speed: 1333 MT/s Handle 0x0030, DMI type 19, 31 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x007FFFFFFFF Range Size: 32 GB Physical Array Handle: 0x002B Partition Width: 2 Handle 0x0031, DMI type 5, 20 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 8192 MB Maximum Total Memory Size: 16384 MB Supported Speeds: Other Supported Memory Types: Other Memory Module Voltage: Unknown Associated Memory Slots: 2 0xFFFF 0xFFFF Enabled Error Correcting Capabilities: None Handle 0x0032, DMI type 38, 18 bytes IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA8 (I/O) Register Spacing: 32-bit Boundaries Handle 0x0034, DMI type 212, 217 bytes OEM-specific Type Header and Data: D4 D9 34 00 70 00 71 00 00 49 4F 6C 28 40 48 F7 08 29 40 48 F7 00 2D 00 4E 3F 80 2E 00 4E 3F 00 42 00 49 EF 10 43 00 49 EF 00 5C 00 48 FD 02 5D 00 48 FD 00 6E 00 4E 3F 40 83 00 76 00 00 84 00 77 00 00 9D 00 4B F7 08 9E 00 4B F7 00 9F 00 48 BF 40 A0 00 48 BF 00 D8 00 4D EF 10 D9 00 4D EF 00 DE 00 4B FB 04 DF 00 4B FB 00 17 01 4C FB 00 18 01 4C FB 04 19 01 4C F7 00 1A 01 4C F7 08 1B 01 4C EF 00 1C 01 4C EF 10 1D 01 4C DF 00 1E 01 4C DF 20 1F 01 4C BF 00 20 01 4C BF 40 2D 01 48 EF 10 2E 01 48 EF 00 35 01 4D FC 00 37 01 4D FC 01 38 01 4D FC 02 39 01 4D FC 03 3B 01 4D F3 04 3C 01 4D F3 08 3D 01 4D F3 0C 40 01 49 BF 00 41 01 49 BF 40 FF FF 00 00 00 Handle 0x0035, DMI type 212, 217 bytes OEM-specific Type Header and Data: D4 D9 35 00 70 00 71 00 00 49 4F 6C 4B 01 49 7F 80 4A 01 49 7F 00 6A 01 4A FC 00 6B 01 4A FC 01 6C 01 4A FC 03 6F 01 48 FB 00 70 01 48 FB 04 77 01 4A F3 00 78 01 4A F3 04 79 01 4A F3 08 7A 01 4A F3 0C DA 01 4E 3F C0 EA 01 4A DF 00 EB 01 4A DF 20 FC 01 4A EF 00 FD 01 4A EF 10 11 02 4C 7F 00 12 02 4C 7F 80 00 00 00 00 00 00 00 00 00 00 2D 02 4A BF 40 2E 02 4A BF 00 4B 02 4A 7F 80 4C 02 4A 7F 00 4D 02 4B FD 02 4E 02 4B FD 00 54 02 4B EF 00 57 02 4B EF 10 9A 02 49 F7 00 9B 02 49 F7 08 AD 02 4D BF 40 AE 02 4D BF 00 01 40 4B FE 00 02 40 4B FE 01 1A 40 4B DF 00 1B 40 4B DF 20 1C 40 4B BF 40 1D 40 4B BF 00 22 40 48 7F 80 23 40 48 7F 00 FF FF 00 00 00 Handle 0x0036, DMI type 212, 72 bytes OEM-specific Type Header and Data: D4 48 36 00 70 00 71 00 00 49 4F 6C 26 40 48 DF 20 27 40 48 DF 00 31 40 4B 7F 80 32 40 4B 7F 00 33 40 4C FC 00 34 40 4C FC 01 35 40 4C FC 02 36 40 4C FC 03 42 40 4D 7F 00 43 40 4D 7F 80 FF FF 00 00 00 00 00 00 00 00 Handle 0x0037, DMI type 212, 77 bytes OEM-specific Type Header and Data: D4 4D 37 00 72 00 73 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 D3 00 00 00 00 D4 00 02 00 00 31 02 5F 79 80 32 02 5F 79 84 33 02 5F 79 82 6E 02 5F 79 80 00 90 2C FF 00 01 90 2D FF 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 Handle 0x0038, DMI type 212, 22 bytes OEM-specific Type Header and Data: D4 16 38 00 72 00 73 00 01 40 49 4A 00 C0 40 00 0A FF FF 00 00 00 Handle 0x0039, DMI type 212, 22 bytes OEM-specific Type Header and Data: D4 16 39 00 72 00 73 00 01 4C 52 53 03 C0 4C 00 07 FF FF 00 00 00 Handle 0x003A, DMI type 127, 4 bytes End Of Table ===== Disques ===== Retour de la commande ssm list (system-storage-manager) : ----------------------------------------------------------------- Device Free Used Total Pool Mount point ----------------------------------------------------------------- /dev/sda 279.40 GB PARTITIONED /dev/sda1 500.00 MB /boot /dev/sda2 64.00 MB 278.84 GB 278.91 GB centos /dev/sdb 279.40 GB /dev/sdb1 0.00 KB 279.39 GB 279.40 GB datastore /dev/sdc 279.40 GB /dev/sdc1 0.00 KB 279.39 GB 279.40 GB datastore /dev/sdd 279.40 GB /dev/sdd1 0.00 KB 279.39 GB 279.40 GB datastore ----------------------------------------------------------------- -------------------------------------------------------- Pool Type Devices Free Used Total -------------------------------------------------------- centos lvm 1 64.00 MB 278.84 GB 278.91 GB datastore lvm 3 0.00 KB 838.18 GB 838.18 GB -------------------------------------------------------- ------------------------------------------------------------------------------------------- Volume Pool Volume size FS FS size Free Type Mount point ------------------------------------------------------------------------------------------- /dev/centos/root centos 50.00 GB xfs 49.98 GB 48.39 GB linear / /dev/centos/swap centos 7.88 GB linear /dev/centos/home centos 220.97 GB xfs 220.86 GB 220.86 GB linear /home /dev/datastore/test datastore 558.78 GB raid5 /dev/sda1 500.00 MB xfs 496.67 MB 332.07 MB part /boot ------------------------------------------------------------------------------------------- ==== Disque 0 sda ==== Retour de la commande smartctl -a /dev/sda : smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.36.3.el7.x86_64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST3300657SS Revision: ES64 User Capacity: 300,000,000,000 bytes [300 GB] Logical block size: 512 bytes Rotation Rate: 15000 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c500473f7f2b Serial number: 6SJ42JRB Device type: disk Transport protocol: SAS Local Time is: Wed Nov 30 18:52:12 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 37 C Drive Trip Temperature: 68 C Elements in grown defect list: 19 Vendor (Seagate) cache information Blocks sent to initiator = 971313755 Blocks received from initiator = 3751205618 Blocks read from cache and sent to initiator = 381677007 Number of read and write commands whose size <= segment size = 1520175409 Number of read and write commands whose size> segment size = 371 Vendor (Seagate/Hitachi) factory information number of hours powered up = 25548.32 number of minutes until next internal SMART test = 52 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 1724431670 0 0 1724431670 1724431670 77450.677 0 write: 0 0 0 0 1 26345.640 0 verify: 130419 0 0 130419 130419 12.449 0 Non-medium error count: 51 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 1 - [- - -] # 2 Background long Completed 16 1 - [- - -] Long (extended) Self Test duration: 3200 seconds [53.3 minutes] ==== Disque 1 sdb ==== Retour de la commande smartctl -a /dev/sdb : smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.36.3.el7.x86_64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST3300657SS Revision: ES64 User Capacity: 300,000,000,000 bytes [300 GB] Logical block size: 512 bytes Rotation Rate: 15000 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c50047e1d7e7 Serial number: 6SJ4FE3X Device type: disk Transport protocol: SAS Local Time is: Wed Nov 30 18:55:26 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 30 C Drive Trip Temperature: 68 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 3265923221 Blocks received from initiator = 867006706 Blocks read from cache and sent to initiator = 166472656 Number of read and write commands whose size <= segment size = 324297990 Number of read and write commands whose size> segment size = 356 Vendor (Seagate/Hitachi) factory information number of hours powered up = 10759.80 number of minutes until next internal SMART test = 48 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 315898671 1 0 315898672 315898672 12500.819 0 write: 0 0 0 0 0 9283.272 0 verify: 456345 0 0 456345 456345 16.129 0 Non-medium error count: 22 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 0 - [- - -] Long (extended) Self Test duration: 3200 seconds [53.3 minutes] ==== Disque 2 sdc ==== Retour de la commande smartctl -a /dev/sdc : smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.36.3.el7.x86_64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST3300657SS Revision: ES64 User Capacity: 300,000,000,000 bytes [300 GB] Logical block size: 512 bytes Rotation Rate: 15000 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c5004839d43f Serial number: 6SJ4KVY4 Device type: disk Transport protocol: SAS Local Time is: Wed Nov 30 18:56:04 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 32 C Drive Trip Temperature: 68 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 1984813050 Blocks received from initiator = 2743448439 Blocks read from cache and sent to initiator = 1312158443 Number of read and write commands whose size <= segment size = 131266659 Number of read and write commands whose size> segment size = 370 Vendor (Seagate/Hitachi) factory information number of hours powered up = 5446.08 number of minutes until next internal SMART test = 48 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 132266802 0 0 132266802 132266802 7429.288 0 write: 0 0 0 0 0 5817.538 0 verify: 255671 0 0 255671 255671 16.504 0 Non-medium error count: 0 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 0 - [- - -] Long (extended) Self Test duration: 3200 seconds [53.3 minutes] ==== Disque 3 sdd ==== Retour de la commande smartctl -a /dev/sdd : smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.36.3.el7.x86_64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST3300657SS Revision: ES64 User Capacity: 300,000,000,000 bytes [300 GB] Logical block size: 512 bytes Rotation Rate: 15000 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c50047170bf3 Serial number: 6SJ3YD5Y Device type: disk Transport protocol: SAS Local Time is: Wed Nov 30 18:56:43 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 33 C Drive Trip Temperature: 68 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 3289963359 Blocks received from initiator = 3428614898 Blocks read from cache and sent to initiator = 3696105612 Number of read and write commands whose size <= segment size = 312766464 Number of read and write commands whose size> segment size = 350 Vendor (Seagate/Hitachi) factory information number of hours powered up = 10464.65 number of minutes until next internal SMART test = 47 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 317588930 4 0 317588934 317588934 14866.728 0 write: 0 0 0 0 0 10595.100 0 verify: 146375 0 0 146375 146375 11.876 0 Non-medium error count: 54 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 0 - [- - -] Long (extended) Self Test duration: 3200 seconds [53.3 minutes] ==== Log de démarrage ==== sortie dmesg: [mai24 18:17] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ +0,000000] Initializing cgroup subsys cpuset [ +0,000000] Initializing cgroup subsys cpu [ +0,000000] Initializing cgroup subsys cpuacct [ +0,000000] Linux version 3.10.0-1127.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC) ) #1 SMP Tue Mar 31 23:36:51 UTC 2020 [ +0,000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-1127.el7.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=fr_FR.UTF-8 [ +0,000000] e820: BIOS-provided physical RAM map: [ +0,000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ +0,000000] BIOS-e820: [mem 0x0000000000100000-0x00000000baa57fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000baa58000-0x00000000baa59fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000baa5a000-0x00000000baa86fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000baa87000-0x00000000baa89fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000baa8a000-0x00000000bb3a8fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000bb3a9000-0x00000000bb3b7fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000bb3b8000-0x00000000bdfaffff] usable [ +0,000000] BIOS-e820: [mem 0x00000000bdfb0000-0x00000000bf3affff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000bf3b0000-0x00000000bf4befff] usable [ +0,000000] BIOS-e820: [mem 0x00000000bf4bf000-0x00000000bf6befff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS [ +0,000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7effff] ACPI data [ +0,000000] BIOS-e820: [mem 0x00000000bf7f0000-0x00000000bf7fffff] usable [ +0,000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable [ +0,000000] NX (Execute Disable) protection: active [ +0,000000] e820: update [mem 0xba9eb018-0xbaa06257] usable ==> usable [ +0,000000] e820: update [mem 0xbaa43018-0xbaa4c457] usable ==> usable [ +0,000000] e820: update [mem 0xba9e2018-0xba9ea057] usable ==> usable [ +0,000000] extended physical RAM map: [ +0,000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ +0,000000] reserve setup_data: [mem 0x0000000000100000-0x00000000ba9e2017] usable [ +0,000000] reserve setup_data: [mem 0x00000000ba9e2018-0x00000000ba9ea057] usable [ +0,000000] reserve setup_data: [mem 0x00000000ba9ea058-0x00000000ba9eb017] usable [ +0,000000] reserve setup_data: [mem 0x00000000ba9eb018-0x00000000baa06257] usable [ +0,000000] reserve setup_data: [mem 0x00000000baa06258-0x00000000baa43017] usable [ +0,000000] reserve setup_data: [mem 0x00000000baa43018-0x00000000baa4c457] usable [ +0,000000] reserve setup_data: [mem 0x00000000baa4c458-0x00000000baa57fff] usable [ +0,000000] reserve setup_data: [mem 0x00000000baa58000-0x00000000baa59fff] reserved [ +0,000000] reserve setup_data: [mem 0x00000000baa5a000-0x00000000baa86fff] usable [ +0,000000] reserve setup_data: [mem 0x00000000baa87000-0x00000000baa89fff] reserved [ +0,000000] reserve setup_data: [mem 0x00000000baa8a000-0x00000000bb3a8fff] usable [ +0,000000] reserve setup_data: [mem 0x00000000bb3a9000-0x00000000bb3b7fff] reserved [ +0,000000] reserve setup_data: [mem 0x00000000bb3b8000-0x00000000bdfaffff] usable [ +0,000000] reserve setup_data: [mem 0x00000000bdfb0000-0x00000000bf3affff] reserved [ +0,000000] reserve setup_data: [mem 0x00000000bf3b0000-0x00000000bf4befff] usable [ +0,000000] reserve setup_data: [mem 0x00000000bf4bf000-0x00000000bf6befff] reserved [ +0,000000] reserve setup_data: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS [ +0,000000] reserve setup_data: [mem 0x00000000bf7bf000-0x00000000bf7effff] ACPI data [ +0,000000] reserve setup_data: [mem 0x00000000bf7f0000-0x00000000bf7fffff] usable [ +0,000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ +0,000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ +0,000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ +0,000000] reserve setup_data: [mem 0x0000000100000000-0x000000083fffffff] usable [ +0,000000] efi: EFI v2.10 by Dell [ +0,000000] efi: SMBIOS=0xbf6aef98 ACPI=0xbf7ef000 ACPI 2.0=0xbf7ef014 [ +0,000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ +0,000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000002000) (0MB) [ +0,000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000002000-0x000000000000e000) (0MB) [ +0,000000] efi: mem03: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB) [ +0,000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000010000-0x000000000004e000) (0MB) [ +0,000000] efi: mem05: type=3, attr=0xf, range=[0x000000000004e000-0x000000000004f000) (0MB) [ +0,000000] efi: mem06: type=4, attr=0xf, range=[0x000000000004f000-0x0000000000050000) (0MB) [ +0,000000] efi: mem07: type=3, attr=0xf, range=[0x0000000000050000-0x000000000008f000) (0MB) [ +0,000000] efi: mem08: type=4, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) [ +0,000000] efi: mem09: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB) [ +0,000000] efi: mem10: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB) [ +0,000000] efi: mem11: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB) [ +0,000000] efi: mem12: type=2, attr=0xf, range=[0x0000000001000000-0x0000000003161000) (33MB) [ +0,000000] efi: mem13: type=7, attr=0xf, range=[0x0000000003161000-0x000000003ebca000) (954MB) [ +0,000000] efi: mem14: type=2, attr=0xf, range=[0x000000003ebca000-0x0000000040000000) (20MB) [ +0,000000] efi: mem15: type=7, attr=0xf, range=[0x0000000040000000-0x000000008bc2b000) (1212MB) [ +0,000000] efi: mem16: type=2, attr=0xf, range=[0x000000008bc2b000-0x00000000ba437000) (744MB) [ +0,000000] efi: mem17: type=1, attr=0xf, range=[0x00000000ba437000-0x00000000ba650000) (2MB) [ +0,000000] efi: mem18: type=7, attr=0xf, range=[0x00000000ba650000-0x00000000ba66c000) (0MB) [ +0,000000] efi: mem19: type=2, attr=0xf, range=[0x00000000ba66c000-0x00000000ba777000) (1MB) [ +0,000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ba777000-0x00000000ba7aa000) (0MB) [ +0,000000] efi: mem21: type=7, attr=0xf, range=[0x00000000ba7aa000-0x00000000ba7dd000) (0MB) [ +0,000000] efi: mem22: type=4, attr=0xf, range=[0x00000000ba7dd000-0x00000000ba841000) (0MB) [ +0,000000] efi: mem23: type=7, attr=0xf, range=[0x00000000ba841000-0x00000000ba873000) (0MB) [ +0,000000] efi: mem24: type=4, attr=0xf, range=[0x00000000ba873000-0x00000000ba939000) (0MB) [ +0,000000] efi: mem25: type=7, attr=0xf, range=[0x00000000ba939000-0x00000000ba96a000) (0MB) [ +0,000000] efi: mem26: type=4, attr=0xf, range=[0x00000000ba96a000-0x00000000ba9cc000) (0MB) [ +0,000000] efi: mem27: type=7, attr=0xf, range=[0x00000000ba9cc000-0x00000000ba9e2000) (0MB) [ +0,000000] efi: mem28: type=2, attr=0xf, range=[0x00000000ba9e2000-0x00000000baa07000) (0MB) [ +0,000000] efi: mem29: type=4, attr=0xf, range=[0x00000000baa07000-0x00000000baa3f000) (0MB) [ +0,000000] efi: mem30: type=7, attr=0xf, range=[0x00000000baa3f000-0x00000000baa43000) (0MB) [ +0,000000] efi: mem31: type=2, attr=0xf, range=[0x00000000baa43000-0x00000000baa4d000) (0MB) [ +0,000000] efi: mem32: type=4, attr=0xf, range=[0x00000000baa4d000-0x00000000baa55000) (0MB) [ +0,000000] efi: mem33: type=3, attr=0xf, range=[0x00000000baa55000-0x00000000baa57000) (0MB) [ +0,000000] efi: mem34: type=4, attr=0xf, range=[0x00000000baa57000-0x00000000baa58000) (0MB) [ +0,000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000baa58000-0x00000000baa5a000) (0MB) [ +0,000000] efi: mem36: type=3, attr=0xf, range=[0x00000000baa5a000-0x00000000baa5d000) (0MB) [ +0,000000] efi: mem37: type=4, attr=0xf, range=[0x00000000baa5d000-0x00000000baa87000) (0MB) [ +0,000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000baa87000-0x00000000baa8a000) (0MB) [ +0,000000] efi: mem39: type=4, attr=0xf, range=[0x00000000baa8a000-0x00000000baa8b000) (0MB) [ +0,000000] efi: mem40: type=3, attr=0xf, range=[0x00000000baa8b000-0x00000000baa8f000) (0MB) [ +0,000000] efi: mem41: type=4, attr=0xf, range=[0x00000000baa8f000-0x00000000baaa5000) (0MB) [ +0,000000] efi: mem42: type=3, attr=0xf, range=[0x00000000baaa5000-0x00000000baaa6000) (0MB) [ +0,000000] efi: mem43: type=4, attr=0xf, range=[0x00000000baaa6000-0x00000000bb2f2000) (8MB) [ +0,000000] efi: mem44: type=7, attr=0xf, range=[0x00000000bb2f2000-0x00000000bb2f4000) (0MB) [ +0,000000] efi: mem45: type=2, attr=0xf, range=[0x00000000bb2f4000-0x00000000bb2f7000) (0MB) [ +0,000000] efi: mem46: type=3, attr=0xf, range=[0x00000000bb2f7000-0x00000000bb32f000) (0MB) [ +0,000000] efi: mem47: type=4, attr=0xf, range=[0x00000000bb32f000-0x00000000bb38c000) (0MB) [ +0,000000] efi: mem48: type=7, attr=0xf, range=[0x00000000bb38c000-0x00000000bb38d000) (0MB) [ +0,000000] efi: mem49: type=4, attr=0xf, range=[0x00000000bb38d000-0x00000000bb38f000) (0MB) [ +0,000000] efi: mem50: type=2, attr=0xf, range=[0x00000000bb38f000-0x00000000bb391000) (0MB) [ +0,000000] efi: mem51: type=4, attr=0xf, range=[0x00000000bb391000-0x00000000bb39c000) (0MB) [ +0,000000] efi: mem52: type=3, attr=0xf, range=[0x00000000bb39c000-0x00000000bb39e000) (0MB) [ +0,000000] efi: mem53: type=4, attr=0xf, range=[0x00000000bb39e000-0x00000000bb3a3000) (0MB) [ +0,000000] efi: mem54: type=3, attr=0xf, range=[0x00000000bb3a3000-0x00000000bb3a8000) (0MB) [ +0,000000] efi: mem55: type=4, attr=0xf, range=[0x00000000bb3a8000-0x00000000bb3a9000) (0MB) [ +0,000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x00000000bb3a9000-0x00000000bb3b8000) (0MB) [ +0,000000] efi: mem57: type=4, attr=0xf, range=[0x00000000bb3b8000-0x00000000bb3ba000) (0MB) [ +0,000000] efi: mem58: type=3, attr=0xf, range=[0x00000000bb3ba000-0x00000000bb3bd000) (0MB) [ +0,000000] efi: mem59: type=4, attr=0xf, range=[0x00000000bb3bd000-0x00000000bb3c0000) (0MB) [ +0,000000] efi: mem60: type=3, attr=0xf, range=[0x00000000bb3c0000-0x00000000bb3c1000) (0MB) [ +0,000000] efi: mem61: type=4, attr=0xf, range=[0x00000000bb3c1000-0x00000000bb40a000) (0MB) [ +0,000000] efi: mem62: type=3, attr=0xf, range=[0x00000000bb40a000-0x00000000bb40b000) (0MB) [ +0,000000] efi: mem63: type=4, attr=0xf, range=[0x00000000bb40b000-0x00000000bb40d000) (0MB) [ +0,000000] efi: mem64: type=3, attr=0xf, range=[0x00000000bb40d000-0x00000000bb40e000) (0MB) [ +0,000000] efi: mem65: type=4, attr=0xf, range=[0x00000000bb40e000-0x00000000bb410000) (0MB) [ +0,000000] efi: mem66: type=3, attr=0xf, range=[0x00000000bb410000-0x00000000bb412000) (0MB) [ +0,000000] efi: mem67: type=4, attr=0xf, range=[0x00000000bb412000-0x00000000bb413000) (0MB) [ +0,000000] efi: mem68: type=3, attr=0xf, range=[0x00000000bb413000-0x00000000bb417000) (0MB) [ +0,000000] efi: mem69: type=4, attr=0xf, range=[0x00000000bb417000-0x00000000bb427000) (0MB) [ +0,000000] efi: mem70: type=3, attr=0xf, range=[0x00000000bb427000-0x00000000bb437000) (0MB) [ +0,000000] efi: mem71: type=4, attr=0xf, range=[0x00000000bb437000-0x00000000bb43b000) (0MB) [ +0,000000] efi: mem72: type=3, attr=0xf, range=[0x00000000bb43b000-0x00000000bb44b000) (0MB) [ +0,000000] efi: mem73: type=4, attr=0xf, range=[0x00000000bb44b000-0x00000000bb44d000) (0MB) [ +0,000000] efi: mem74: type=3, attr=0xf, range=[0x00000000bb44d000-0x00000000bb44f000) (0MB) [ +0,000000] efi: mem75: type=4, attr=0xf, range=[0x00000000bb44f000-0x00000000bb46e000) (0MB) [ +0,000000] efi: mem76: type=3, attr=0xf, range=[0x00000000bb46e000-0x00000000bb470000) (0MB) [ +0,000000] efi: mem77: type=4, attr=0xf, range=[0x00000000bb470000-0x00000000bb471000) (0MB) [ +0,000000] efi: mem78: type=3, attr=0xf, range=[0x00000000bb471000-0x00000000bb477000) (0MB) [ +0,000000] efi: mem79: type=4, attr=0xf, range=[0x00000000bb477000-0x00000000bb47a000) (0MB) [ +0,000000] efi: mem80: type=3, attr=0xf, range=[0x00000000bb47a000-0x00000000bb491000) (0MB) [ +0,000000] efi: mem81: type=4, attr=0xf, range=[0x00000000bb491000-0x00000000bb494000) (0MB) [ +0,000000] efi: mem82: type=3, attr=0xf, range=[0x00000000bb494000-0x00000000bb498000) (0MB) [ +0,000000] efi: mem83: type=4, attr=0xf, range=[0x00000000bb498000-0x00000000bb499000) (0MB) [ +0,000000] efi: mem84: type=3, attr=0xf, range=[0x00000000bb499000-0x00000000bb49a000) (0MB) [ +0,000000] efi: mem85: type=4, attr=0xf, range=[0x00000000bb49a000-0x00000000bb49b000) (0MB) [ +0,000000] efi: mem86: type=3, attr=0xf, range=[0x00000000bb49b000-0x00000000bb49c000) (0MB) [ +0,000000] efi: mem87: type=4, attr=0xf, range=[0x00000000bb49c000-0x00000000bb4a8000) (0MB) [ +0,000000] efi: mem88: type=3, attr=0xf, range=[0x00000000bb4a8000-0x00000000bb4ee000) (0MB) [ +0,000000] efi: mem89: type=4, attr=0xf, range=[0x00000000bb4ee000-0x00000000bb4f5000) (0MB) [ +0,000000] efi: mem90: type=3, attr=0xf, range=[0x00000000bb4f5000-0x00000000bb4fb000) (0MB) [ +0,000000] efi: mem91: type=4, attr=0xf, range=[0x00000000bb4fb000-0x00000000bb4fc000) (0MB) [ +0,000000] efi: mem92: type=3, attr=0xf, range=[0x00000000bb4fc000-0x00000000bb50b000) (0MB) [ +0,000000] efi: mem93: type=4, attr=0xf, range=[0x00000000bb50b000-0x00000000bb50d000) (0MB) [ +0,000000] efi: mem94: type=3, attr=0xf, range=[0x00000000bb50d000-0x00000000bb513000) (0MB) [ +0,000000] efi: mem95: type=4, attr=0xf, range=[0x00000000bb513000-0x00000000bb514000) (0MB) [ +0,000000] efi: mem96: type=3, attr=0xf, range=[0x00000000bb514000-0x00000000bb51a000) (0MB) [ +0,000000] efi: mem97: type=4, attr=0xf, range=[0x00000000bb51a000-0x00000000bb51b000) (0MB) [ +0,000000] efi: mem98: type=3, attr=0xf, range=[0x00000000bb51b000-0x00000000bb51c000) (0MB) [ +0,000000] efi: mem99: type=4, attr=0xf, range=[0x00000000bb51c000-0x00000000bb51d000) (0MB) [ +0,000000] efi: mem100: type=3, attr=0xf, range=[0x00000000bb51d000-0x00000000bb52e000) (0MB) [ +0,000000] efi: mem101: type=4, attr=0xf, range=[0x00000000bb52e000-0x00000000bb534000) (0MB) [ +0,000000] efi: mem102: type=3, attr=0xf, range=[0x00000000bb534000-0x00000000bb53f000) (0MB) [ +0,000000] efi: mem103: type=4, attr=0xf, range=[0x00000000bb53f000-0x00000000bb541000) (0MB) [ +0,000000] efi: mem104: type=3, attr=0xf, range=[0x00000000bb541000-0x00000000bb54e000) (0MB) [ +0,000000] efi: mem105: type=4, attr=0xf, range=[0x00000000bb54e000-0x00000000bb54f000) (0MB) [ +0,000000] efi: mem106: type=3, attr=0xf, range=[0x00000000bb54f000-0x00000000bb552000) (0MB) [ +0,000000] efi: mem107: type=4, attr=0xf, range=[0x00000000bb552000-0x00000000bb557000) (0MB) [ +0,000000] efi: mem108: type=3, attr=0xf, range=[0x00000000bb557000-0x00000000bb565000) (0MB) [ +0,000000] efi: mem109: type=4, attr=0xf, range=[0x00000000bb565000-0x00000000bb605000) (0MB) [ +0,000000] efi: mem110: type=2, attr=0xf, range=[0x00000000bb605000-0x00000000bb606000) (0MB) [ +0,000000] efi: mem111: type=4, attr=0xf, range=[0x00000000bb606000-0x00000000bb916000) (3MB) [ +0,000000] efi: mem112: type=3, attr=0xf, range=[0x00000000bb916000-0x00000000bb91f000) (0MB) [ +0,000000] efi: mem113: type=4, attr=0xf, range=[0x00000000bb91f000-0x00000000bb926000) (0MB) [ +0,000000] efi: mem114: type=3, attr=0xf, range=[0x00000000bb926000-0x00000000bb947000) (0MB) [ +0,000000] efi: mem115: type=4, attr=0xf, range=[0x00000000bb947000-0x00000000bb949000) (0MB) [ +0,000000] efi: mem116: type=3, attr=0xf, range=[0x00000000bb949000-0x00000000bb94c000) (0MB) [ +0,000000] efi: mem117: type=4, attr=0xf, range=[0x00000000bb94c000-0x00000000bb94e000) (0MB) [ +0,000000] efi: mem118: type=3, attr=0xf, range=[0x00000000bb94e000-0x00000000bb960000) (0MB) [ +0,000000] efi: mem119: type=4, attr=0xf, range=[0x00000000bb960000-0x00000000bb962000) (0MB) [ +0,000000] efi: mem120: type=3, attr=0xf, range=[0x00000000bb962000-0x00000000bb967000) (0MB) [ +0,000000] efi: mem121: type=4, attr=0xf, range=[0x00000000bb967000-0x00000000bb968000) (0MB) [ +0,000000] efi: mem122: type=3, attr=0xf, range=[0x00000000bb968000-0x00000000bb96b000) (0MB) [ +0,000000] efi: mem123: type=4, attr=0xf, range=[0x00000000bb96b000-0x00000000bb96d000) (0MB) [ +0,000000] efi: mem124: type=3, attr=0xf, range=[0x00000000bb96d000-0x00000000bb974000) (0MB) [ +0,000000] efi: mem125: type=4, attr=0xf, range=[0x00000000bb974000-0x00000000bb978000) (0MB) [ +0,000000] efi: mem126: type=3, attr=0xf, range=[0x00000000bb978000-0x00000000bb97f000) (0MB) [ +0,000000] efi: mem127: type=4, attr=0xf, range=[0x00000000bb97f000-0x00000000bb981000) (0MB) [ +0,000000] efi: mem128: type=3, attr=0xf, range=[0x00000000bb981000-0x00000000bb98a000) (0MB) [ +0,000000] efi: mem129: type=4, attr=0xf, range=[0x00000000bb98a000-0x00000000bb98e000) (0MB) [ +0,000000] efi: mem130: type=3, attr=0xf, range=[0x00000000bb98e000-0x00000000bb996000) (0MB) [ +0,000000] efi: mem131: type=4, attr=0xf, range=[0x00000000bb996000-0x00000000bb99a000) (0MB) [ +0,000000] efi: mem132: type=3, attr=0xf, range=[0x00000000bb99a000-0x00000000bb99d000) (0MB) [ +0,000000] efi: mem133: type=4, attr=0xf, range=[0x00000000bb99d000-0x00000000bb9a0000) (0MB) [ +0,000000] efi: mem134: type=3, attr=0xf, range=[0x00000000bb9a0000-0x00000000bb9ae000) (0MB) [ +0,000000] efi: mem135: type=4, attr=0xf, range=[0x00000000bb9ae000-0x00000000bb9b0000) (0MB) [ +0,000000] efi: mem136: type=3, attr=0xf, range=[0x00000000bb9b0000-0x00000000bb9b3000) (0MB) [ +0,000000] efi: mem137: type=4, attr=0xf, range=[0x00000000bb9b3000-0x00000000bb9b4000) (0MB) [ +0,000000] efi: mem138: type=3, attr=0xf, range=[0x00000000bb9b4000-0x00000000bb9b5000) (0MB) [ +0,000000] efi: mem139: type=4, attr=0xf, range=[0x00000000bb9b5000-0x00000000bb9b9000) (0MB) [ +0,000000] efi: mem140: type=3, attr=0xf, range=[0x00000000bb9b9000-0x00000000bb9bb000) (0MB) [ +0,000000] efi: mem141: type=4, attr=0xf, range=[0x00000000bb9bb000-0x00000000bb9bf000) (0MB) [ +0,000000] efi: mem142: type=3, attr=0xf, range=[0x00000000bb9bf000-0x00000000bb9c4000) (0MB) [ +0,000000] efi: mem143: type=4, attr=0xf, range=[0x00000000bb9c4000-0x00000000bb9c5000) (0MB) [ +0,000000] efi: mem144: type=3, attr=0xf, range=[0x00000000bb9c5000-0x00000000bb9cb000) (0MB) [ +0,000000] efi: mem145: type=4, attr=0xf, range=[0x00000000bb9cb000-0x00000000bb9e2000) (0MB) [ +0,000000] efi: mem146: type=3, attr=0xf, range=[0x00000000bb9e2000-0x00000000bb9ed000) (0MB) [ +0,000000] efi: mem147: type=4, attr=0xf, range=[0x00000000bb9ed000-0x00000000bb9ee000) (0MB) [ +0,000000] efi: mem148: type=3, attr=0xf, range=[0x00000000bb9ee000-0x00000000bb9f0000) (0MB) [ +0,000000] efi: mem149: type=4, attr=0xf, range=[0x00000000bb9f0000-0x00000000bba09000) (0MB) [ +0,000000] efi: mem150: type=3, attr=0xf, range=[0x00000000bba09000-0x00000000bba19000) (0MB) [ +0,000000] efi: mem151: type=4, attr=0xf, range=[0x00000000bba19000-0x00000000bba1a000) (0MB) [ +0,000000] efi: mem152: type=3, attr=0xf, range=[0x00000000bba1a000-0x00000000bba23000) (0MB) [ +0,000000] efi: mem153: type=4, attr=0xf, range=[0x00000000bba23000-0x00000000bba26000) (0MB) [ +0,000000] efi: mem154: type=3, attr=0xf, range=[0x00000000bba26000-0x00000000bba65000) (0MB) [ +0,000000] efi: mem155: type=4, attr=0xf, range=[0x00000000bba65000-0x00000000bba6c000) (0MB) [ +0,000000] efi: mem156: type=3, attr=0xf, range=[0x00000000bba6c000-0x00000000bba6f000) (0MB) [ +0,000000] efi: mem157: type=4, attr=0xf, range=[0x00000000bba6f000-0x00000000bba75000) (0MB) [ +0,000000] efi: mem158: type=3, attr=0xf, range=[0x00000000bba75000-0x00000000bba77000) (0MB) [ +0,000000] efi: mem159: type=4, attr=0xf, range=[0x00000000bba77000-0x00000000bba78000) (0MB) [ +0,000000] efi: mem160: type=3, attr=0xf, range=[0x00000000bba78000-0x00000000bba7c000) (0MB) [ +0,000000] efi: mem161: type=4, attr=0xf, range=[0x00000000bba7c000-0x00000000bba7f000) (0MB) [ +0,000000] efi: mem162: type=3, attr=0xf, range=[0x00000000bba7f000-0x00000000bbaf0000) (0MB) [ +0,000000] efi: mem163: type=4, attr=0xf, range=[0x00000000bbaf0000-0x00000000bbaf4000) (0MB) [ +0,000000] efi: mem164: type=3, attr=0xf, range=[0x00000000bbaf4000-0x00000000bbaf7000) (0MB) [ +0,000000] efi: mem165: type=4, attr=0xf, range=[0x00000000bbaf7000-0x00000000bbaf8000) (0MB) [ +0,000000] efi: mem166: type=3, attr=0xf, range=[0x00000000bbaf8000-0x00000000bbb10000) (0MB) [ +0,000000] efi: mem167: type=4, attr=0xf, range=[0x00000000bbb10000-0x00000000bbb13000) (0MB) [ +0,000000] efi: mem168: type=3, attr=0xf, range=[0x00000000bbb13000-0x00000000bbb29000) (0MB) [ +0,000000] efi: mem169: type=4, attr=0xf, range=[0x00000000bbb29000-0x00000000bbb9d000) (0MB) [ +0,000000] efi: mem170: type=3, attr=0xf, range=[0x00000000bbb9d000-0x00000000bbba3000) (0MB) [ +0,000000] efi: mem171: type=4, attr=0xf, range=[0x00000000bbba3000-0x00000000bbba4000) (0MB) [ +0,000000] efi: mem172: type=3, attr=0xf, range=[0x00000000bbba4000-0x00000000bbba5000) (0MB) [ +0,000000] efi: mem173: type=4, attr=0xf, range=[0x00000000bbba5000-0x00000000bbba6000) (0MB) [ +0,000000] efi: mem174: type=3, attr=0xf, range=[0x00000000bbba6000-0x00000000bbbaa000) (0MB) [ +0,000000] efi: mem175: type=4, attr=0xf, range=[0x00000000bbbaa000-0x00000000bbbab000) (0MB) [ +0,000000] efi: mem176: type=3, attr=0xf, range=[0x00000000bbbab000-0x00000000bbbc1000) (0MB) [ +0,000000] efi: mem177: type=4, attr=0xf, range=[0x00000000bbbc1000-0x00000000bdfb0000) (35MB) [ +0,000000] efi: mem178: type=0, attr=0xf, range=[0x00000000bdfb0000-0x00000000bf3b0000) (20MB) [ +0,000000] efi: mem179: type=4, attr=0xf, range=[0x00000000bf3b0000-0x00000000bf3bf000) (0MB) [ +0,000000] efi: mem180: type=3, attr=0xf, range=[0x00000000bf3bf000-0x00000000bf4bf000) (1MB) [ +0,000000] efi: mem181: type=5, attr=0x800000000000000f, range=[0x00000000bf4bf000-0x00000000bf4c0000) (0MB) [ +0,000000] efi: mem182: type=5, attr=0x800000000000000f, range=[0x00000000bf4c0000-0x00000000bf5af000) (0MB) [ +0,000000] efi: mem183: type=6, attr=0x800000000000000f, range=[0x00000000bf5af000-0x00000000bf5db000) (0MB) [ +0,000000] efi: mem184: type=0, attr=0xf, range=[0x00000000bf5db000-0x00000000bf5dd000) (0MB) [ +0,000000] efi: mem185: type=6, attr=0x800000000000000f, range=[0x00000000bf5dd000-0x00000000bf5eb000) (0MB) [ +0,000000] efi: mem186: type=0, attr=0xf, range=[0x00000000bf5eb000-0x00000000bf5ef000) (0MB) [ +0,000000] efi: mem187: type=6, attr=0x800000000000000f, range=[0x00000000bf5ef000-0x00000000bf5f0000) (0MB) [ +0,000000] efi: mem188: type=0, attr=0xf, range=[0x00000000bf5f0000-0x00000000bf601000) (0MB) [ +0,000000] efi: mem189: type=6, attr=0x800000000000000f, range=[0x00000000bf601000-0x00000000bf60d000) (0MB) [ +0,000000] efi: mem190: type=6, attr=0x800000000000000f, range=[0x00000000bf60d000-0x00000000bf63f000) (0MB) [ +0,000000] efi: mem191: type=0, attr=0xf, range=[0x00000000bf63f000-0x00000000bf640000) (0MB) [ +0,000000] efi: mem192: type=0, attr=0xf, range=[0x00000000bf640000-0x00000000bf64b000) (0MB) [ +0,000000] efi: mem193: type=0, attr=0xf, range=[0x00000000bf64b000-0x00000000bf6bf000) (0MB) [ +0,000000] efi: mem194: type=10, attr=0xf, range=[0x00000000bf6bf000-0x00000000bf7aa000) (0MB) [ +0,000000] efi: mem195: type=10, attr=0xf, range=[0x00000000bf7aa000-0x00000000bf7bf000) (0MB) [ +0,000000] efi: mem196: type=9, attr=0xf, range=[0x00000000bf7bf000-0x00000000bf7d3000) (0MB) [ +0,000000] efi: mem197: type=9, attr=0xf, range=[0x00000000bf7d3000-0x00000000bf7f0000) (0MB) [ +0,000000] efi: mem198: type=4, attr=0xf, range=[0x00000000bf7f0000-0x00000000bf800000) (0MB) [ +0,000000] efi: mem199: type=7, attr=0xf, range=[0x0000000100000000-0x0000000840000000) (29696MB) [ +0,000000] efi: mem200: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) [ +0,000000] efi: mem201: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ +0,000000] efi: mem202: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffe60000) (2MB) [ +0,000000] efi: mem203: type=11, attr=0x8000000000000000, range=[0x00000000ffe60000-0x00000000ffe80000) (0MB) [ +0,000000] efi: mem204: type=11, attr=0x8000000000000000, range=[0x00000000ffe80000-0x0000000100000000) (1MB) [ +0,000000] SMBIOS 2.7 present. [ +0,000000] DMI: Dell Inc. PowerEdge T110 II/015TH9, BIOS 2.8.0 06/24/2014 [ +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ +0,000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ +0,000000] e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000 [ +0,000000] MTRR default type: uncachable [ +0,000000] MTRR fixed ranges enabled: [ +0,000000] 00000-9FFFF write-back [ +0,000000] A0000-BFFFF uncachable [ +0,000000] C0000-FFFFF write-protect [ +0,000000] MTRR variable ranges enabled: [ +0,000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ +0,000000] 1 base 000000000 mask F80000000 write-back [ +0,000000] 2 base 080000000 mask FC0000000 write-back [ +0,000000] 3 disabled [ +0,000000] 4 base 100000000 mask F00000000 write-back [ +0,000000] 5 base 200000000 mask E00000000 write-back [ +0,000000] 6 base 400000000 mask C00000000 write-back [ +0,000000] 7 base 800000000 mask FC0000000 write-back [ +0,000000] 8 disabled [ +0,000000] 9 disabled [ +0,000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC [ +0,000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ +0,000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffffffffff2401b0] [ +0,000000] Base memory trampoline at [ffff8ba780097000] 97000 size 24576 [ +0,000000] BRK [0x140273000, 0x140273fff] PGTABLE [ +0,000000] BRK [0x140274000, 0x140274fff] PGTABLE [ +0,000000] BRK [0x140275000, 0x140275fff] PGTABLE [ +0,000000] BRK [0x140276000, 0x140276fff] PGTABLE [ +0,000000] BRK [0x140277000, 0x140277fff] PGTABLE [ +0,000000] BRK [0x140278000, 0x140278fff] PGTABLE [ +0,000000] BRK [0x140279000, 0x140279fff] PGTABLE [ +0,000000] BRK [0x14027a000, 0x14027afff] PGTABLE [ +0,000000] BRK [0x14027b000, 0x14027bfff] PGTABLE [ +0,000000] BRK [0x14027c000, 0x14027cfff] PGTABLE [ +0,000000] BRK [0x14027d000, 0x14027dfff] PGTABLE [ +0,000000] BRK [0x14027e000, 0x14027efff] PGTABLE [ +0,000000] RAMDISK: [mem 0x3ebca000-0x3fffdfff] [ +0,000000] Early table checksum verification disabled [ +0,000000] ACPI: RSDP 00000000bf7ef014 00024 (v02 DELL ) [ +0,000000] ACPI: XSDT 00000000bf7ef170 000AC (v01 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: FACP 00000000bf7eb000 000F4 (v04 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: DSDT 00000000bf7e1000 068FE (v01 DELL PE_SC3 00000000 DELL 00040000) [ +0,000000] ACPI: FACS 00000000bf7b8000 00040 [ +0,000000] ACPI: SPMI 00000000bf7ee000 00040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: DMAR 00000000bf7ed000 00078 (v01 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: ASF! 00000000bf7ec000 000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: HPET 00000000bf7ea000 00038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: APIC 00000000bf7e9000 00092 (v02 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: MCFG 00000000bf7e8000 0003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: SLIC 00000000bf7e0000 00176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: BOOT 00000000bf7dd000 00028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: SSDT 00000000bf7dc000 002F6 (v01 DELL PE_SC3 00001000 DELL 00040000) [ +0,000000] ACPI: ASPT 00000000bf7d9000 00034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ +0,000000] ACPI: SSDT 00000000bf7d8000 009AA (v01 DELL PE_SC3 00003000 DELL 00040000) [ +0,000000] ACPI: SSDT 00000000bf7d7000 00A92 (v01 DELL PE_SC3 00003000 DELL 00040000) [ +0,000000] ACPI: HEST 00000000bf7d6000 000A8 (v01 DELL PE_SC3 00000000 DELL 00040000) [ +0,000000] ACPI: ERST 00000000bf7d5000 00230 (v01 DELL PE_SC3 00000000 DELL 00040000) [ +0,000000] ACPI: BERT 00000000bf7d4000 00030 (v01 DELL PE_SC3 00000000 DELL 00040000) [ +0,000000] ACPI: EINJ 00000000bf7d3000 00130 (v01 DELL PE_SC3 00000000 DELL 00040000) [ +0,000000] ACPI: Local APIC address 0xfee00000 [ +0,000000] No NUMA configuration found [ +0,000000] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] [ +0,000000] NODE_DATA(0) allocated [mem 0x83ffbc000-0x83ffe2fff] [ +0,000000] Zone ranges: [ +0,000000] DMA [mem 0x00001000-0x00ffffff] [ +0,000000] DMA32 [mem 0x01000000-0xffffffff] [ +0,000000] Normal [mem 0x100000000-0x83fffffff] [ +0,000000] Movable zone start for each node [ +0,000000] Early memory node ranges [ +0,000000] node 0: [mem 0x00001000-0x0009ffff] [ +0,000000] node 0: [mem 0x00100000-0xbaa57fff] [ +0,000000] node 0: [mem 0xbaa5a000-0xbaa86fff] [ +0,000000] node 0: [mem 0xbaa8a000-0xbb3a8fff] [ +0,000000] node 0: [mem 0xbb3b8000-0xbdfaffff] [ +0,000000] node 0: [mem 0xbf3b0000-0xbf4befff] [ +0,000000] node 0: [mem 0xbf7f0000-0xbf7fffff] [ +0,000000] node 0: [mem 0x100000000-0x83fffffff] [ +0,000000] Initmem setup node 0 [mem 0x00001000-0x83fffffff] [ +0,000000] On node 0 totalpages: 8380506 [ +0,000000] DMA zone: 64 pages used for memmap [ +0,000000] DMA zone: 1114 pages reserved [ +0,000000] DMA zone: 3999 pages, LIFO batch:0 [ +0,000000] DMA32 zone: 12099 pages used for memmap [ +0,000000] DMA32 zone: 774331 pages, LIFO batch:31 [ +0,000000] Normal zone: 118784 pages used for memmap [ +0,000000] Normal zone: 7602176 pages, LIFO batch:31 [ +0,000000] ACPI: PM-Timer IO Port: 0x408 [ +0,000000] ACPI: Local APIC address 0xfee00000 [ +0,000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ +0,000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ +0,000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ +0,000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ +0,000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ +0,000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ +0,000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ +0,000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ +0,000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ +0,000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ +0,000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ +0,000000] ACPI: IRQ0 used by override. [ +0,000000] ACPI: IRQ9 used by override. [ +0,000000] Using ACPI (MADT) for SMP configuration information [ +0,000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ +0,000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ +0,000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ +0,000000] PM: Registered nosave memory: [mem 0xba9e2000-0xba9e2fff] [ +0,000000] PM: Registered nosave memory: [mem 0xba9ea000-0xba9eafff] [ +0,000000] PM: Registered nosave memory: [mem 0xba9eb000-0xba9ebfff] [ +0,000000] PM: Registered nosave memory: [mem 0xbaa06000-0xbaa06fff] [ +0,000000] PM: Registered nosave memory: [mem 0xbaa43000-0xbaa43fff] [ +0,000000] PM: Registered nosave memory: [mem 0xbaa4c000-0xbaa4cfff] [ +0,000000] PM: Registered nosave memory: [mem 0xbaa58000-0xbaa59fff] [ +0,000000] PM: Registered nosave memory: [mem 0xbaa87000-0xbaa89fff] [ +0,000000] PM: Registered nosave memory: [mem 0xbb3a9000-0xbb3b7fff] [ +0,000000] PM: Registered nosave memory: [mem 0xbdfb0000-0xbf3affff] [ +0,000000] PM: Registered nosave memory: [mem 0xbf4bf000-0xbf6befff] [ +0,000000] PM: Registered nosave memory: [mem 0xbf6bf000-0xbf7befff] [ +0,000000] PM: Registered nosave memory: [mem 0xbf7bf000-0xbf7effff] [ +0,000000] PM: Registered nosave memory: [mem 0xbf800000-0xe00f7fff] [ +0,000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ +0,000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ +0,000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ +0,000000] PM: Registered nosave memory: [mem 0xfed20000-0xffbfffff] [ +0,000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ +0,000000] e820: [mem 0xbf800000-0xe00f7fff] available for PCI devices [ +0,000000] Booting paravirtualized kernel on bare hardware [ +0,000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ +0,000000] percpu: Embedded 38 pages/cpu s118784 r8192 d28672 u262144 [ +0,000000] pcpu-alloc: s118784 r8192 d28672 u262144 alloc=1*2097152 [ +0,000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ +0,000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8248445 [ +0,000000] Policy zone: Normal [ +0,000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-1127.el7.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=fr_FR.UTF-8 [ +0,000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ +0,000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ +0,000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ +0,000000] Memory: 5042908k/34603008k available (7784k kernel code, 1080984k absent, 694096k reserved, 5957k data, 1980k init) [ +0,000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ +0,000000] x86/pti: Unmapping kernel while in userspace [ +0,000000] Hierarchical RCU implementation. [ +0,000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8. [ +0,000000] NR_IRQS:327936 nr_irqs:488 0 [ +0,000000] Console: colour dummy device 80x25 [ +0,000000] console [tty0] enabled [ +0,000000] allocated 134217728 bytes of page_cgroup [ +0,000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ +0,000000] hpet clockevent registered [ +0,000000] tsc: Fast TSC calibration using PIT [ +0,000000] tsc: Detected 3092.937 MHz processor [ +0,000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.87 BogoMIPS (lpj=3092937) [ +0,000002] pid_max: default: 32768 minimum: 301 [ +0,020092] Security Framework initialized [ +0,000008] SELinux: Initializing. [ +0,000008] SELinux: Starting in permissive mode [ +0,000001] Yama: becoming mindful. [ +0,002033] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ +0,005336] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ +0,002207] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ +0,000033] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ +0,000263] Initializing cgroup subsys memory [ +0,000005] Initializing cgroup subsys devices [ +0,000001] Initializing cgroup subsys freezer [ +0,000001] Initializing cgroup subsys net_cls [ +0,000001] Initializing cgroup subsys blkio [ +0,000001] Initializing cgroup subsys perf_event [ +0,000002] Initializing cgroup subsys hugetlb [ +0,000001] Initializing cgroup subsys pids [ +0,000001] Initializing cgroup subsys net_prio [ +0,000025] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ +0,000001] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ +0,000007] CPU0: Thermal monitoring handled by SMI [ +0,000013] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ +0,000001] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ +0,000001] tlb_flushall_shift: 6 [ +0,000025] FEATURE SPEC_CTRL Present [ +0,000001] FEATURE IBPB_SUPPORT Present [ +0,000001] Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers and __user pointer sanitization [ +0,000002] Spectre V2 : Enabling Indirect Branch Prediction Barrier [ +0,000098] Spectre V2 : Mitigation: Full retpoline [ +0,000012] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ +0,000018] MDS: Mitigation: Clear CPU buffers [ +0,000154] Freeing SMP alternatives: 28k freed [ +0,002336] ACPI: Core revision 20130517 [ +0,003369] ACPI: All ACPI Tables successfully acquired [ +0,805968] ftrace: allocating 29618 entries in 116 pages [ +0,021060] DMAR: Host address width 36 [ +0,000002] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ +0,000005] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da [ +0,000002] DMAR: RMRR base: 0x00000000000000 end: 0x00000000000fff [ +0,000002] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed90000 IOMMU 0 [ +0,000001] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ +0,000002] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ +0,000146] DMAR-IR: Enabled IRQ remapping in x2apic mode [ +0,000001] Enabling x2apic [ +0,000001] Enabled x2apic [ +0,000006] Switched APIC routing to cluster x2apic. [ +0,000440] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ +0,010002] smpboot: CPU0: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (fam: 06, model: 2a, stepping: 07) [ +0,000007] TSC deadline timer enabled [ +0,000041] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ +0,000009] ... version: 3 [ +0,000002] ... bit width: 48 [ +0,000001] ... generic registers: 8 [ +0,000001] ... value mask: 0000ffffffffffff [ +0,000001] ... max period: 00007fffffffffff [ +0,000001] ... fixed-purpose events: 3 [ +0,000001] ... event mask: 00000007000000ff [ +0,002107] CPU1: Thermal monitoring handled by SMI [ +0,002206] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ +0,001024] CPU2: Thermal monitoring handled by SMI [ +0,003154] CPU3: Thermal monitoring handled by SMI [ -0,007437] smpboot: Booting Node 0, Processors #1 #2 #3 [ +0,009573] Brought up 4 CPUs [ +0,000003] smpboot: Max logical packages: 2 [ +0,000001] smpboot: Total of 4 processors activated (24743.49 BogoMIPS) [ +0,129608] node 0 initialised, 6946255 pages in 126ms [ +0,000143] devtmpfs: initialized [ +0,000066] x86/mm: Memory block size: 128MB [ +0,004396] EVM: security.selinux [ +0,000001] EVM: security.ima [ +0,000002] EVM: security.capability [ +0,000064] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff] (1048576 bytes) [ +0,001087] atomic64 test passed for x86-64 platform with CX8 and with SSE [ +0,000003] pinctrl core: initialized pinctrl subsystem [ +0,000039] RTC time: 16:17:58, date: 05/24/20 [ +0,000066] NET: Registered protocol family 16 [ +0,000192] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ +0,000002] ACPI: bus type PCI registered [ +0,000002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ +0,000060] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ +0,000002] PCI: not using MMCONFIG [ +0,000002] PCI: Using configuration type 1 for base access [ +0,000158] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ +0,000008] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ +0,007735] ACPI: Added _OSI(Module Device) [ +0,000002] ACPI: Added _OSI(Processor Device) [ +0,000001] ACPI: Added _OSI(3.0 _SCP Extensions) [ +0,000001] ACPI: Added _OSI(Processor Aggregator Device) [ +0,000002] ACPI: Added _OSI(Linux-Dell-Video) [ +0,000882] ACPI: EC: Look up EC in DSDT [ +0,000866] ACPI: Executed 1 blocks of module-level executable AML code [ +0,002079] ACPI: Dynamic OEM Table Load: [ +0,000009] ACPI: SSDT ffff8baf9f09a000 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20080729) [ +0,000397] ACPI: Dynamic OEM Table Load: [ +0,000006] ACPI: SSDT ffff8baf9f0a9000 00303 (v01 PmRef ApIst 00003000 INTL 20080729) [ +0,000301] ACPI: Dynamic OEM Table Load: [ +0,000005] ACPI: SSDT ffff8baf9f0cc000 00119 (v01 PmRef ApCst 00003000 INTL 20080729) [ +0,000605] ACPI: Interpreter enabled [ +0,000014] ACPI: (supports S0 S4 S5) [ +0,000001] ACPI: Using IOAPIC for interrupt routing [ +0,000014] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ +0,000216] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ +0,000040] HEST: Table parsing has been initialized. [ +0,000003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ +0,000049] ACPI: Enabled 9 GPEs in block 00 to 3F [ +0,003321] ACPI: Power Resource [FN00] (off) [ +0,000064] ACPI: Power Resource [FN01] (off) [ +0,000061] ACPI: Power Resource [FN02] (off) [ +0,000062] ACPI: Power Resource [FN03] (off) [ +0,000061] ACPI: Power Resource [FN04] (off) [ +0,000443] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ +0,000004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ +0,000425] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability] [ +0,000002] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ +0,000354] PCI host bridge to bus 0000:00 [ +0,000003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ +0,000002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ +0,000002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ +0,000002] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ +0,000002] pci_bus 0000:00: root bus resource [bus 00-fe] [ +0,000007] pci 0000:00:00.0: [8086:0108] type 00 class 0x060000 [ +0,000075] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ +0,000032] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ +0,000032] pci 0000:00:01.0: System wakeup disabled by ACPI [ +0,000064] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ +0,000303] pci 0000:00:1a.0: reg 0x10: [mem 0xc1306000-0xc13063ff] [ +0,001751] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ +0,000051] pci 0000:00:1a.0: System wakeup disabled by ACPI [ +0,000043] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ +0,000141] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ +0,000059] pci 0000:00:1c.0: System wakeup disabled by ACPI [ +0,000041] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ +0,000081] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ +0,000044] pci 0000:00:1c.4: System wakeup disabled by ACPI [ +0,000042] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ +0,000295] pci 0000:00:1d.0: reg 0x10: [mem 0xc1305000-0xc13053ff] [ +0,001755] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ +0,000050] pci 0000:00:1d.0: System wakeup disabled by ACPI [ +0,000034] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ +0,000080] pci 0000:00:1e.0: System wakeup disabled by ACPI [ +0,000036] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 [ +0,000157] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ +0,000015] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ +0,000008] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ +0,000008] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ +0,000008] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ +0,000008] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ +0,000008] pci 0000:00:1f.2: reg 0x24: [mem 0xc1304000-0xc13047ff] [ +0,000039] pci 0000:00:1f.2: PME# supported from D3hot [ +0,000066] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ +0,000016] pci 0000:00:1f.3: reg 0x10: [mem 0xc1302000-0xc13020ff 64bit] [ +0,000020] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ +0,000104] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ +0,000010] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff] [ +0,000009] pci 0000:01:00.0: reg 0x14: [mem 0xc1240000-0xc124ffff 64bit] [ +0,000008] pci 0000:01:00.0: reg 0x1c: [mem 0xc1200000-0xc123ffff 64bit] [ +0,000010] pci 0000:01:00.0: reg 0x30: [mem 0xfff00000-0xffffffff pref] [ +0,000033] pci 0000:01:00.0: supports D1 D2 [ +0,000015] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8 GT/s x8 link) [ +0,000009] pci 0000:01:00.0: System wakeup disabled by ACPI [ +0,001090] pci 0000:00:01.0: PCI bridge to [bus 01] [ +0,000005] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ +0,000005] pci 0000:00:01.0: bridge window [mem 0xc1200000-0xc12fffff] [ +0,000082] pci 0000:00:1c.0: PCI bridge to [bus 02] [ +0,000086] pci 0000:03:00.0: [14e4:165a] type 00 class 0x020000 [ +0,000038] pci 0000:03:00.0: reg 0x10: [mem 0xc1100000-0xc110ffff 64bit] [ +0,000170] pci 0000:03:00.0: PME# supported from D3hot D3cold [ +0,000059] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.4 (capable of 7.876 Gb/s with 8 GT/s x1 link) [ +0,000010] pci 0000:03:00.0: System wakeup disabled by ACPI [ +0,001559] pci 0000:00:1c.4: PCI bridge to [bus 03] [ +0,000011] pci 0000:00:1c.4: bridge window [mem 0xc1100000-0xc11fffff] [ +0,000065] pci 0000:04:03.0: [102b:0532] type 00 class 0x030000 [ +0,000016] pci 0000:04:03.0: reg 0x10: [mem 0xc0000000-0xc07fffff pref] [ +0,000010] pci 0000:04:03.0: reg 0x14: [mem 0xc1000000-0xc1003fff] [ +0,000010] pci 0000:04:03.0: reg 0x18: [mem 0xc0800000-0xc0ffffff] [ +0,000032] pci 0000:04:03.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ +0,000091] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ +0,000006] pci 0000:00:1e.0: bridge window [mem 0xc0800000-0xc10fffff] [ +0,000005] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc07fffff 64bit pref] [ +0,000002] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ +0,000002] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ +0,000002] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ +0,000002] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ +0,000639] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ +0,000042] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ +0,000041] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ +0,000045] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 *6 10 11 12 14 15) [ +0,000040] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 *14 15) [ +0,000040] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 *6 10 11 12 14 15) [ +0,000040] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ +0,000040] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 *15) [ +0,000236] vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none [ +0,000001] vgaarb: loaded [ +0,000001] vgaarb: bridge control possible 0000:04:03.0 [ +0,000062] SCSI subsystem initialized [ +0,000025] ACPI: bus type USB registered [ +0,000015] usbcore: registered new interface driver usbfs [ +0,000008] usbcore: registered new interface driver hub [ +0,000015] usbcore: registered new device driver usb [ +0,000058] EDAC MC: Ver: 3.0.0 [ +0,000084] Registered efivars operations [ +0,000055] PCI: Using ACPI for IRQ routing [ +0,006038] PCI: pci_cache_line_size set to 64 bytes [ +0,000034] e820: reserve RAM buffer [mem 0xba9e2018-0xbbffffff] [ +0,000002] e820: reserve RAM buffer [mem 0xba9eb018-0xbbffffff] [ +0,000002] e820: reserve RAM buffer [mem 0xbaa43018-0xbbffffff] [ +0,000001] e820: reserve RAM buffer [mem 0xbaa58000-0xbbffffff] [ +0,000002] e820: reserve RAM buffer [mem 0xbaa87000-0xbbffffff] [ +0,000001] e820: reserve RAM buffer [mem 0xbb3a9000-0xbbffffff] [ +0,000001] e820: reserve RAM buffer [mem 0xbdfb0000-0xbfffffff] [ +0,000002] e820: reserve RAM buffer [mem 0xbf4bf000-0xbfffffff] [ +0,000002] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ +0,000102] NetLabel: Initializing [ +0,000002] NetLabel: domain hash size = 128 [ +0,000000] NetLabel: protocols = UNLABELED CIPSOv4 [ +0,000014] NetLabel: unlabeled traffic allowed by default [ +0,000058] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ +0,000005] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ +0,002014] amd_nb: Cannot enumerate AMD northbridges [ +0,000012] Switched to clocksource hpet [ +0,004075] pnp: PnP ACPI init [ +0,000012] ACPI: bus type PNP registered [ +0,000105] system 00:00: [io 0x0680-0x069f] has been reserved [ +0,000003] system 00:00: [io 0x1000-0x100f] has been reserved [ +0,000002] system 00:00: [io 0x1010-0x1013] has been reserved [ +0,000002] system 00:00: [io 0xffff] has been reserved [ +0,000002] system 00:00: [io 0x0400-0x0453] could not be reserved [ +0,000002] system 00:00: [io 0x0458-0x047f] has been reserved [ +0,000001] system 00:00: [io 0x0500-0x057f] has been reserved [ +0,000002] system 00:00: [io 0x164e-0x164f] has been reserved [ +0,000003] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ +0,000031] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ +0,000032] system 00:02: [io 0x0454-0x0457] has been reserved [ +0,000003] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ +0,000218] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ +0,000114] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ +0,000031] system 00:05: [mem 0xfed90000-0xfed91fff] could not be reserved [ +0,000003] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ +0,000117] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ +0,000003] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ +0,000001] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ +0,000003] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ +0,000002] system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved [ +0,000002] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ +0,000002] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ +0,000002] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ +0,000002] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ +0,000002] system 00:06: [mem 0xc1400000-0xc1400fff] has been reserved [ +0,000003] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ +0,000130] pnp: PnP ACPI: found 7 devices [ +0,000001] ACPI: bus type PNP unregistered [ +0,006244] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window [ +0,000004] pci 0000:04:03.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ +0,000008] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00100000 pref] [ +0,000002] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00100000 pref] [ +0,000002] pci 0000:00:01.0: PCI bridge to [bus 01] [ +0,000003] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ +0,000003] pci 0000:00:01.0: bridge window [mem 0xc1200000-0xc12fffff] [ +0,000004] pci 0000:00:1c.0: PCI bridge to [bus 02] [ +0,000018] pci 0000:00:1c.4: PCI bridge to [bus 03] [ +0,000005] pci 0000:00:1c.4: bridge window [mem 0xc1100000-0xc11fffff] [ +0,000009] pci 0000:04:03.0: BAR 6: assigned [mem 0xc1010000-0xc101ffff pref] [ +0,000002] pci 0000:00:1e.0: PCI bridge to [bus 04] [ +0,000005] pci 0000:00:1e.0: bridge window [mem 0xc0800000-0xc10fffff] [ +0,000005] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc07fffff 64bit pref] [ +0,000006] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ +0,000002] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ +0,000002] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ +0,000002] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff window] [ +0,000002] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ +0,000001] pci_bus 0000:01: resource 1 [mem 0xc1200000-0xc12fffff] [ +0,000002] pci_bus 0000:03: resource 1 [mem 0xc1100000-0xc11fffff] [ +0,000002] pci_bus 0000:04: resource 1 [mem 0xc0800000-0xc10fffff] [ +0,000002] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc07fffff 64bit pref] [ +0,000002] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ +0,000001] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ +0,000002] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ +0,000002] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff window] [ +0,000023] NET: Registered protocol family 2 [ +0,000248] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ +0,000345] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ +0,000113] TCP: Hash tables configured (established 262144 bind 65536) [ +0,000016] TCP: reno registered [ +0,000041] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ +0,000091] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ +0,000097] NET: Registered protocol family 1 [ +0,021893] pci 0000:04:03.0: Boot video device [ +0,000003] PCI: CLS 64 bytes, default 64 [ +0,000034] Unpacking initramfs... [ +0,238805] Freeing initrd memory: 20688k freed [ +0,002179] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ +0,000004] software IO TLB [mem 0xb6777000-0xba777000] (64MB) mapped at [ffff8ba836777000-ffff8ba83a776fff] [ +0,000072] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ +0,000002] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ +0,000001] RAPL PMU: hw unit of domain package 2^-16 Joules [ +0,000001] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ +0,000053] Simple Boot Flag at 0x44 set to 0x1 [ +0,000436] sha1_ssse3: Using AVX optimized SHA-1 implementation [ +0,000041] sha256_ssse3: Using AVX optimized SHA-256 implementation [ +0,000286] futex hash table entries: 2048 (order: 5, 131072 bytes) [ +0,000021] Initialise system trusted keyring [ +0,000018] audit: initializing netlink socket (disabled) [ +0,000012] type=2000 audit(1590337077.508:1): initialized [ +0,021300] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ +0,001227] zpool: loaded [ +0,000002] zbud: loaded [ +0,000251] VFS: Disk quotas dquot_6.5.2 [ +0,000027] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ +0,000223] Key type big_key registered [ +0,000002] SELinux: Registering netfilter hooks [ +0,000541] NET: Registered protocol family 38 [ +0,000004] Key type asymmetric registered [ +0,000003] Asymmetric key parser 'x509' registered [ +0,000026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ +0,000042] io scheduler noop registered [ +0,000003] io scheduler deadline registered (default) [ +0,000022] io scheduler cfq registered [ +0,000003] io scheduler mq-deadline registered [ +0,000003] io scheduler kyber registered [ +0,000181] pcieport 0000:00:01.0: irq 25 for MSI/MSI-X [ +0,000143] pcieport 0000:00:1c.0: irq 26 for MSI/MSI-X [ +0,000151] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X [ +0,000079] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ +0,000003] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ +0,000002] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ +0,000019] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ +0,000006] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ +0,000015] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ +0,000002] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ +0,000004] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded [ +0,000014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ +0,000006] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ +0,000011] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ +0,000075] efifb: probing for efifb [ +0,000009] efifb: framebuffer at 0xc0000000, mapped to 0xffffb64f83600000, using 1200k, total 1200k [ +0,000002] efifb: mode is 640x480x32, linelength=2560, pages=1 [ +0,000000] efifb: scrolling: redraw [ +0,000002] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ +0,012849] Console: switching to colour frame buffer device 80x30 [ +0,011091] fb0: EFI VGA frame buffer device [ +0,000007] intel_idle: MWAIT substates: 0x1120 [ +0,000002] intel_idle: v0.4.1 model 0x2A [ +0,000017] intel_idle: lapic_timer_reliable_states 0xffffffff [ +0,000077] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ +0,000003] ACPI: Power Button [PWRF] [ +0,000213] ACPI: Requesting acpi_cpufreq [ +0,001387] thermal LNXTHERM:00: registered as thermal_zone0 [ +0,000002] ACPI: Thermal Zone [TZ01] (30 C) [ +0,000052] ERST: Error Record Serialization Table (ERST) support is initialized. [ +0,000002] pstore: Registered erst as persistent store backend [ +0,000130] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ +0,000053] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ +0,020558] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ +0,020585] 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ +0,000324] Non-volatile memory driver v1.3 [ +0,000027] Linux agpgart interface v0.103 [ +0,000077] crash memory driver: version 1.1 [ +0,000079] rdac: device handler registered [ +0,000031] hp_sw: device handler registered [ +0,000003] emc: device handler registered [ +0,000024] alua: device handler registered [ +0,000071] libphy: Fixed MDIO Bus: probed [ +0,000038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ +0,000007] ehci-pci: EHCI PCI platform driver [ +0,000085] ehci-pci 0000:00:1a.0: EHCI Host Controller [ +0,000032] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ +0,000012] ehci-pci 0000:00:1a.0: debug port 2 [ +0,003898] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ +0,000014] ehci-pci 0000:00:1a.0: irq 20, io mem 0xc1306000 [ +0,005775] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ +0,000040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10 [ +0,000002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000002] usb usb1: Product: EHCI Host Controller [ +0,000002] usb usb1: Manufacturer: Linux 3.10.0-1127.el7.x86_64 ehci_hcd [ +0,000001] usb usb1: SerialNumber: 0000:00:1a.0 [ +0,000091] hub 1-0:1.0: USB hub found [ +0,000006] hub 1-0:1.0: 2 ports detected [ +0,000168] ehci-pci 0000:00:1d.0: EHCI Host Controller [ +0,000035] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ +0,000011] ehci-pci 0000:00:1d.0: debug port 2 [ +0,003892] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ +0,000013] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1305000 [ +0,005739] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ +0,000031] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10 [ +0,000002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000002] usb usb2: Product: EHCI Host Controller [ +0,000001] usb usb2: Manufacturer: Linux 3.10.0-1127.el7.x86_64 ehci_hcd [ +0,000002] usb usb2: SerialNumber: 0000:00:1d.0 [ +0,000079] hub 2-0:1.0: USB hub found [ +0,000005] hub 2-0:1.0: 2 ports detected [ +0,000080] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ +0,000005] ohci-pci: OHCI PCI platform driver [ +0,000009] uhci_hcd: USB Universal Host Controller Interface driver [ +0,000042] usbcore: registered new interface driver usbserial_generic [ +0,000005] usbserial: USB Serial support registered for generic [ +0,000037] i8042: PNP: No PS/2 controller found. Probing ports directly. [ +1,045450] i8042: No controller found [ +0,000261] mousedev: PS/2 mouse device common for all mice [ +0,000011] tsc: Refined TSC clocksource calibration: 3092.963 MHz [ +0,000012] Switched to clocksource tsc [ +0,000071] rtc_cmos 00:01: RTC can wake from S4 [ +0,000112] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ +0,000027] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ +0,000046] intel_pstate: Intel P-state driver initializing [ +0,000222] cpuidle: using governor menu [ +0,000427] EFI Variables Facility v0.08 2004-May-17 [ +0,197629] hidraw: raw HID events driver (C) Jiri Kosina [ +0,000103] usbcore: registered new interface driver usbhid [ +0,000001] usbhid: USB HID core driver [ +0,000052] drop_monitor: Initializing network drop monitor service [ +0,000052] TCP: cubic registered [ +0,000003] Initializing XFRM netlink socket [ +0,000091] NET: Registered protocol family 10 [ +0,000176] NET: Registered protocol family 17 [ +0,000006] mpls_gso: MPLS GSO support [ +0,000176] mce: Using 9 MCE banks [ +0,000053] microcode: sig=0x206a7, pf=0x2, revision=0x2f [ +0,000099] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ +0,000193] PM: Hibernation image not present or could not be loaded. [ +0,000002] Loading compiled-in X.509 certificates [ +0,000027] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717' [ +0,000011] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b' [ +0,000424] Loaded X.509 cert 'CentOS Linux kernel signing key: 690e8a482fe76bfbf231d860f0c662d8f1173d57' [ +0,000017] registered taskstats version 1 [ +0,002378] Key type trusted registered [ +0,002316] Key type encrypted registered [ +0,000029] IMA: No TPM chip found, activating TPM-bypass! (rc=-19) [ +0,000119] Magic number: 4:215:288 [ +0,000011] tty tty21: hash matches [ +0,000031] memory memory150: hash matches [ +0,000052] rtc_cmos 00:01: setting system clock to 2020-05-24 16:17:59 UTC (1590337079) [ +0,000799] Freeing unused kernel memory: 1980k freed [ +0,000187] Write protecting the kernel read-only data: 12288k [ +0,000943] Freeing unused kernel memory: 396k freed [ +0,001045] Freeing unused kernel memory: 540k freed [ +0,004054] usb 1-1: new high-speed USB device number 2 using ehci-pci [ +0,000995] usb 2-1: new high-speed USB device number 2 using ehci-pci [ +0,123413] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ +0,000003] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ +0,000275] hub 1-1:1.0: USB hub found [ +0,000094] hub 1-1:1.0: 6 ports detected [ +0,001620] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ +0,000003] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ +0,000264] hub 2-1:1.0: USB hub found [ +0,000106] hub 2-1:1.0: 6 ports detected [ +0,252147] random: systemd: uninitialized urandom read (16 bytes read) [ +0,000275] random: systemd: uninitialized urandom read (16 bytes read) [ +0,000013] random: systemd: uninitialized urandom read (16 bytes read) [ +0,000632] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ +0,000131] systemd[1]: Detected architecture x86-64. [ +0,000003] systemd[1]: Running in initial RAM disk. [ +0,000028] systemd[1]: Set hostname to . [ +0,034485] random: systemd: uninitialized urandom read (16 bytes read) [ +0,000020] random: systemd: uninitialized urandom read (16 bytes read) [ +0,000027] random: systemd: uninitialized urandom read (16 bytes read) [ +0,000046] random: systemd: uninitialized urandom read (16 bytes read) [ +0,000579] random: systemd: uninitialized urandom read (16 bytes read) [ +0,000106] random: systemd: uninitialized urandom read (16 bytes read) [ +0,000298] random: systemd: uninitialized urandom read (16 bytes read) [ +0,003874] systemd[1]: Created slice Root Slice. [ +0,000089] systemd[1]: Created slice System Slice. [ +0,000037] systemd[1]: Listening on udev Kernel Socket. [ +0,000012] systemd[1]: Reached target Local File Systems. [ +0,000055] systemd[1]: Listening on Journal Socket. [ +0,000439] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ +0,000471] systemd[1]: Starting Apply Kernel Variables... [ +0,000372] systemd[1]: Starting Journal Service... [ +0,000384] systemd[1]: Starting Setup Virtual Console... [ +0,000019] systemd[1]: Reached target Slices. [ +0,000015] systemd[1]: Reached target Swap. [ +0,000050] systemd[1]: Listening on udev Control Socket. [ +0,000011] systemd[1]: Reached target Sockets. [ +0,000015] systemd[1]: Reached target Timers. [ +0,000479] systemd[1]: Starting dracut cmdline hook... [ +0,000382] systemd[1]: Started Create list of required static device nodes for the current kernel. [ +0,000907] systemd[1]: Started Apply Kernel Variables. [ +0,000597] systemd[1]: Starting Create Static Device Nodes in /dev... [ +0,002302] systemd[1]: Started Create Static Device Nodes in /dev. [ +0,016267] systemd[1]: Started Journal Service. [ +0,097535] device-mapper: uevent: version 1.0.3 [ +0,000060] device-mapper: ioctl: 4.37.1-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ +0,058519] pps_core: LinuxPPS API ver. 1 registered [ +0,000003] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ +0,001556] PTP clock support registered [ +0,013747] mpt2sas version 20.103.01.00 loaded [ +0,000761] tg3.c:v3.137 (May 11, 2014) [ +0,001601] mpt2sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ +0,000657] libata version 3.00 loaded. [ +0,014233] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address d4:ae:52:b8:9c:7c [ +0,000004] tg3 0000:03:00.0 eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ +0,000002] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ +0,000002] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ +0,000229] ahci 0000:00:1f.2: version 3.0 [ +0,000134] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ +0,000054] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32913640 kB) [ +0,010579] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x10 impl SATA mode [ +0,000004] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ +0,004042] scsi host1: ahci [ +0,001125] scsi host2: ahci [ +0,000077] scsi host3: ahci [ +0,000070] scsi host4: ahci [ +0,000075] scsi host5: ahci [ +0,000071] scsi host6: ahci [ +0,000045] ata1: DUMMY [ +0,000001] ata2: DUMMY [ +0,000001] ata3: DUMMY [ +0,000001] ata4: DUMMY [ +0,000004] ata5: SATA max UDMA/133 abar m2048@0xc1304000 port 0xc1304300 irq 28 [ +0,000001] ata6: DUMMY [ +0,004087] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ +0,000037] mpt2sas_cm0: MSI-X vectors supported: 1 [ +0,000000] no of cores: 4, max_msix_vectors: -1 [ +0,000001] mpt2sas_cm0: 0 1 [ +0,000070] mpt2sas 0000:01:00.0: irq 29 for MSI/MSI-X [ +0,000140] mpt2sas_cm0: High IOPs queues : disabled [ +0,000000] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 29 [ +0,000002] mpt2sas_cm0: iomem(0x00000000c1240000), mapped(0xffffb64f83760000), size(65536) [ +0,000000] mpt2sas_cm0: ioport(0x0000000000002000), size(256) [ +0,000508] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ +0,006055] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ +0,000001] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ +0,000000] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ +0,004009] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ +0,000045] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ +0,000014] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.04.00), ChipRevision(0x03), BiosVersion(07.00.01.00) [ +0,000003] mpt2sas_cm0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) [ +0,000120] scsi host0: Fusion MPT SAS Host [ +0,003407] mpt2sas_cm0: sending port enable !! [ +0,008988] checking generic (c0000000 12c000) vs hw (c0000000 800000) [ +0,000003] fb: conflicting fb hw usage mgag200drmfb vs EFI VGA - removing generic driver [ +0,000017] Console: switching to colour dummy device 80x25 [ +0,004462] [TTM] Zone kernel: Available graphics memory: 16456820 kiB [ +0,000003] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ +0,000001] [TTM] Initializing pool allocator [ +0,000004] [TTM] Initializing DMA pool allocator [ +0,031955] fbcon: mgadrmfb (fb0) is primary device [ +0,000043] Console: switching to colour frame buffer device 128x48 [ +0,241514] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ +0,003165] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GH70N, A101, max UDMA/100 [ +0,004260] ata5.00: configured for UDMA/100 [ +0,005496] scsi: waiting for bus probes to complete ... [ +0,177304] mgag200 0000:04:03.0: fb0: mgadrmfb frame buffer device [ +0,003802] [drm] Initialized mgag200 1.0.0 20110418 for 0000:04:03.0 on minor 0 [ +1,106306] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5782bcb06d14a900), phys(8) [ +6,128738] mpt2sas_cm0: port enable: SUCCESS [ +0,000319] scsi 0:1:0:0: Direct-Access Dell Virtual Disk 1028 PQ: 0 ANSI: 6 [ +0,000432] scsi 0:1:0:0: RAID10: handle(0x004f), wwid(0x087926521f6e1294), pd_count(4), type(SSP) [ +0,000006] scsi 0:1:0:0: Set queue's max_sector to: 8192 [ +0,000013] scsi 0:1:0:0: qdepth(128), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ +0,005724] scsi 0:0:0:0: Direct-Access SEAGATE ST3300657SS ES64 PQ: 0 ANSI: 5 [ +0,000201] scsi 0:0:0:0: SSP: handle(0x0009), sas_addr(0x5000c50047e1d7e5), phy(4), device_name(0x00c50050e4d7e147) [ +0,000005] scsi 0:0:0:0: enclosure logical id (0x5782bcb06d14a900), slot(3) [ +0,000005] scsi 0:0:0:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) [ +0,015253] scsi 0:0:1:0: Direct-Access SEAGATE ST3300657SS ES64 PQ: 0 ANSI: 5 [ +0,000208] scsi 0:0:1:0: SSP: handle(0x000a), sas_addr(0x5000c5004839d43d), phy(5), device_name(0x00c500503cd43948) [ +0,000005] scsi 0:0:1:0: enclosure logical id (0x5782bcb06d14a900), slot(2) [ +0,000005] scsi 0:0:1:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) [ +0,014335] random: fast init done [ +0,001470] scsi 0:0:2:0: Direct-Access SEAGATE ST3300657SS ES64 PQ: 0 ANSI: 5 [ +0,000199] scsi 0:0:2:0: SSP: handle(0x000b), sas_addr(0x5000c50047170bf1), phy(6), device_name(0x00c50050f00b1747) [ +0,000005] scsi 0:0:2:0: enclosure logical id (0x5782bcb06d14a900), slot(1) [ +0,000005] scsi 0:0:2:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) [ +0,014824] scsi 0:0:3:0: Direct-Access SEAGATE ST3300657SS ES64 PQ: 0 ANSI: 5 [ +0,000411] scsi 0:0:3:0: SSP: handle(0x000c), sas_addr(0x5000c500473f7f29), phy(7), device_name(0x00c50050287f3f47) [ +0,000006] scsi 0:0:3:0: enclosure logical id (0x5782bcb06d14a900), slot(0) [ +0,000005] scsi 0:0:3:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) [ +0,018563] scsi 5:0:0:0: CD-ROM HL-DT-ST DVD+-RW GH70N A101 PQ: 0 ANSI: 5 [ +0,032371] sd 0:1:0:0: [sda] 1169686528 512-byte logical blocks: (598 GB/557 GiB) [ +0,000099] sd 0:1:0:0: [sda] Write Protect is off [ +0,000004] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08 [ +0,000030] sd 0:1:0:0: [sda] No Caching mode page found [ +0,000003] sd 0:1:0:0: [sda] Assuming drive cache: write through [ +0,015074] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ +0,000004] cdrom: Uniform CD-ROM driver Revision: 3.20 [ +0,000143] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ +0,027709] sda: sda1 sda2 sda3 [ +0,000676] sd 0:1:0:0: [sda] Attached SCSI disk [ +0,519481] SGI XFS with ACLs, security attributes, no debug enabled [ +0,002006] XFS (dm-0): Mounting V5 Filesystem [ +0,102204] XFS (dm-0): Ending clean mount [ +0,292792] systemd-journald[112]: Received SIGTERM from PID 1 (systemd). [ +0,066679] random: crng init done [ +0,235829] type=1404 audit(1590337089.255:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ +0,061871] SELinux: 2048 avtab hash slots, 112685 rules. [ +0,058385] SELinux: 2048 avtab hash slots, 112685 rules. [ +0,029212] SELinux: 8 users, 14 roles, 5046 types, 316 bools, 1 sens, 1024 cats [ +0,000003] SELinux: 130 classes, 112685 rules [ +0,004702] SELinux: Completing initialization. [ +0,000002] SELinux: Setting up existing superblocks. [ +0,008720] type=1403 audit(1590337089.418:3): policy loaded auid=4294967295 ses=4294967295 [ +0,004969] systemd[1]: Successfully loaded SELinux policy in 172.733ms. [ +0,230284] ip_tables: (C) 2000-2006 Netfilter Core Team [ +0,000131] systemd[1]: Inserted module 'ip_tables' [ +0,028179] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 24.908ms. [ +1,208643] systemd-journald[534]: Received request to flush runtime journal from PID 1 [ +0,478432] EDAC MC0: Giving out device to 'ie31200_edac' 'IE31200': DEV 0000:00:00.0 [ +0,007026] IPMI message handler: version 39.2 [ +0,003501] ipmi device interface [ +0,016180] ipmi_si: IPMI System Interface driver [ +0,000016] ipmi_si dmi-ipmi-si.0: probing via SMBIOS [ +0,000004] ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0 [ +0,000001] ipmi_si: Adding SMBIOS-specified kcs state machine [ +0,000015] ipmi_si IPI0001:00: probing via ACPI [ +0,000039] ipmi_si IPI0001:00: [io 0x0ca8] regsize 1 spacing 4 irq 0 [ +0,000002] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ +0,005584] ipmi_si: Adding ACPI-specified kcs state machine [ +0,000053] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 [ +0,011689] sd 0:1:0:0: Attached scsi generic sg0 type 0 [ +0,000561] scsi 0:0:0:0: Attached scsi generic sg1 type 0 [ +0,000345] scsi 0:0:1:0: Attached scsi generic sg2 type 0 [ +0,000061] scsi 0:0:2:0: Attached scsi generic sg3 type 0 [ +0,000179] scsi 0:0:3:0: Attached scsi generic sg4 type 0 [ +0,000038] sr 5:0:0:0: Attached scsi generic sg5 type 5 [ +0,005070] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20130517/utaddress-254) [ +0,000006] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ +0,000004] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20130517/utaddress-254) [ +0,000003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ +0,000001] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20130517/utaddress-254) [ +0,000003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ +0,000002] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20130517/utaddress-254) [ +0,000002] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ +0,000002] lpc_ich: Resource conflict(s) found affecting gpio_ich [ +0,004747] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ +0,005987] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ +0,004621] cryptd: max_cpu_qlen set to 1000 [ +0,010160] AVX version of gcm_enc/dec engaged. [ +0,000003] AES CTR mode by8 optimization enabled [ +0,012237] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ +0,000520] alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni) [ +0,007412] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ +0,025360] ipmi_si IPI0001:00: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) [ +0,000853] iTCO_vendor_support: vendor-support=0 [ +0,001217] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ +0,000036] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ +0,000309] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ +0,026858] intel_rapl: Found RAPL domain package [ +0,000001] intel_rapl: Found RAPL domain core [ +0,000002] intel_rapl: RAPL package 0 domain package locked by BIOS [ +0,054460] ipmi_si IPI0001:00: IPMI kcs interface initialized [ +0,002962] ipmi_ssif: IPMI SSIF Interface driver [ +0,200440] Adding 16515068k swap on /dev/mapper/centos-swap. Priority:-2 extents:1 across:16515068k FS [ +0,185053] XFS (sda2): Mounting V5 Filesystem [ +0,476908] XFS (sda2): Ending clean mount [ +0,951622] XFS (dm-2): Mounting V5 Filesystem [ +0,252580] XFS (dm-2): Ending clean mount [ +0,200128] RPC: Registered named UNIX socket transport module. [ +0,000003] RPC: Registered udp transport module. [ +0,000002] RPC: Registered tcp transport module. [ +0,000001] RPC: Registered tcp NFSv4.1 backchannel transport module. [ +0,002113] type=1305 audit(1590337093.845:4): audit_pid=721 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ +0,907243] ip6_tables: (C) 2000-2006 Netfilter Core Team [ +0,019325] Ebtables v2.0 registered [ +0,008966] Netfilter messages via NETLINK v0.30. [ +0,004190] ip_set: protocol 7 [ +0,111661] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ +0,092249] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ +0,001174] openvswitch: Open vSwitch switching datapath [ +0,296055] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready [ +0,000128] tg3 0000:03:00.0: irq 30 for MSI/MSI-X [ +0,035241] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready [mai24 18:18] tg3 0000:03:00.0 em1: Link is up at 1000 Mbps, full duplex [ +0,000011] tg3 0000:03:00.0 em1: Flow control is off for TX and off for RX [ +0,000023] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready [ +0,326936] device ovs-system entered promiscuous mode [ +0,008540] device br0 entered promiscuous mode [ +0,308412] device em1 entered promiscuous mode [ +0,116174] device lan entered promiscuous mode [ +4,279923] FS-Cache: Loaded [ +0,025313] FS-Cache: Netfs 'nfs' registered for caching [ +0,006741] Key type dns_resolver registered [ +0,025208] NFS: Registering the id_resolver key type [ +0,000009] Key type id_resolver registered [ +0,000001] Key type id_legacy registered [ +0,531152] tun: Universal TUN/TAP device driver, 1.6 [ +0,000003] tun: (C) 1999-2004 Max Krasnyansky [ +0,001423] virbr0: port 1(virbr0-nic) entered blocking state [ +0,000003] virbr0: port 1(virbr0-nic) entered disabled state [ +0,000036] device virbr0-nic entered promiscuous mode [ +0,131604] virbr0: port 1(virbr0-nic) entered blocking state [ +0,000005] virbr0: port 1(virbr0-nic) entered listening state [ +0,000113] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ +0,035156] virbr0: port 1(virbr0-nic) entered disabled state